74HCT00D vs 74HCT240D,653

74HCT00D과 74HCT240D,653에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The 74HCT00D and 74HCT240D,653 are not functionally interchangeable. The 74HCT00D is a quad 2-input NAND gate, while the 74HCT240D,653 is an octal buffer/line driver with 3-state outputs. They differ in logic function, channel count, output type, and pin configuration, making direct substitution impossible without circuit redesign.

Different logic function Different channel count Different output type Different pin configuration

Parts at a glance

Part A

74HCT00D

도시바 반도체 및 스토리지

Lifecycle
Active
Stock
1289 PCS
Package
SOIC-20
Series
로직 - 도어 및 인버터

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter 74HCT00D 74HCT240D,653 Why it matters
Logic Function Quad 2-input NAND gate Octal inverting buffer/line driver with 3-state outputs Defines the fundamental logic operation performed; these devices are not functionally interchangeable.
Number of Gates / Channels 4 gates 8 channels Determines how many independent signal paths the device can process simultaneously.
Output Type Push-pull (totem-pole) 3-state (tri-state) 3-state outputs allow bus sharing by high-impedance disconnection, which push-pull outputs cannot do.
Inputs per Channel 2 inputs per gate 1 input per channel Affects the logic capability and pin usage for implementing a given circuit function.
Output Drive Current (IOH/IOL) ±4 mA ±6 mA Higher drive current enables driving heavier loads or longer traces without additional buffering.
Propagation Delay (tpd) Typ. 9 ns at 5 V Typ. 12 ns at 5 V Affects maximum operating frequency and timing margins in synchronous designs.
Package SO14 (14-pin SOIC) SO20 (20-pin SOIC) Different pin counts and footprints prevent direct PCB drop-in replacement.
Pin Count 14 20 Determines board layout compatibility and available I/O connections.
Enable / Control Inputs None Two active-low output enable pins (1OE, 2OE) Enable pins allow output high-impedance control for bus arbitration, absent in the NAND gate device.
Supply Voltage Range 4.5 V to 5.5 V 4.5 V to 5.5 V Both are HCT-family devices with TTL-compatible thresholds, so supply compatibility is identical.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification 74HCT00D 74HCT240D,653
Supplier - Rochester Electronics, LLC
Series 74HCT Bulk
Logic Type NAND Gate Active
Part Status Obsolete -
Number of Circuits 4 -
Number of Inputs 2 -
Voltage - Supply 4.5V ~ 5.5V -
Current - Quiescent (Max) 1 µA -
Current - Output High Low 4mA, 4mA -
Logic Level - Low 0.8V -
Logic Level - High 2V -
Max Propagation Delay @ V Max CL 17ns @ 5.5V, 50pF -
Operating Temperature -40°C ~ 85°C -
Mounting Type Surface Mount -

Frequently asked questions

What are the primary functional differences between the 74HCT00D and the 74HCT240D,653?

The 74HCT00D contains four independent 2-input NAND gates, while the 74HCT240D,653 contains eight inverting 3-state buffers arranged as two 4-bit groups with separate output enable pins. They are not functionally equivalent and cannot be used interchangeably without redesigning the surrounding logic.

Are the 74HCT00D and 74HCT240D,653 pin-compatible?

No. The 74HCT00D is typically supplied in a 14-pin SOIC package, whereas the 74HCT240D,653 is supplied in a 20-pin SOIC package. The pin counts, pin assignments, and package footprints differ, so they are not drop-in replacements for each other.

Do both devices operate from the same supply voltage range?

Yes. Both are HCT-family logic devices and are specified for a nominal 5 V supply, typically operating over the 4.5 V to 5.5 V range as stated in their respective manufacturer datasheets. HCT inputs are also compatible with TTL logic levels.

Which device is better suited for bus driving or multiplexing applications?

The 74HCT240D,653 is intended for bus-oriented applications because its 3-state outputs can be placed in a high-impedance state via the output enable pins, allowing multiple devices to share a common bus. The 74HCT00D has standard totem-pole outputs and no 3-state capability, so it is not suitable for direct bus sharing.

Can the 74HCT240D,653 be used to replace a 74HCT00D in an existing NAND gate circuit?

No. The 74HCT240D,653 provides inverting buffers, not NAND gates, and its 3-state outputs require proper enable signal control. Replacing a 74HCT00D with a 74HCT240D,653 would change the logic function and require circuit and pinout modifications.

What are the output drive characteristics of these two devices?

Both devices are HCT-family parts typically specified with symmetric CMOS output drive, commonly in the range of ±4 mA to ±6 mA per output at 5 V, depending on the manufacturer and test conditions. For guaranteed drive current, refer to the specific manufacturer datasheet for each part number.

Are the 74HCT00D and 74HCT240D,653 interchangeable in terms of logic family and noise immunity?

They belong to the same HCT logic family and share similar TTL-compatible input thresholds and noise margins. However, because their logic functions, pinouts, and output structures differ, they are not interchangeable in a circuit even though their family-level electrical characteristics are similar.

Which part number indicates a 3-state output capability?

The 74HCT240D,653 indicates 3-state outputs, as the 240 function is an octal inverting buffer with 3-state control. The 74HCT00D does not have 3-state outputs; it provides standard push-pull NAND gate outputs.