74HCT04D
도시바 반도체 및 스토리지
- Lifecycle
- Active
- Stock
- 4496 PCS
- Package
- SOIC-16
- Series
- 로직 - 도어 및 인버터
74HCT04D과 74HCT221D,118에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.
Replacement verdict
The 74HCT04D and 74HCT221D,118 are functionally distinct devices and cannot be used interchangeably. The 74HCT04D is a hex inverting gate, while the 74HCT221D,118 is a dual monostable multivibrator with Schmitt-trigger inputs. Their logic functions, pin configurations, and application roles differ fundamentally, making direct substitution impossible without circuit redesign.
도시바 반도체 및 스토리지
넥스페리아 USA 주식회사
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | 74HCT04D | 74HCT221D,118 | Why it matters |
|---|---|---|---|
| Logic Function | Hex Inverter | Dual Monostable Multivibrator | The logic function defines the fundamental operation; these devices perform completely different functions and are not functionally substitutable. |
| Number of Circuits | 6 | 2 | The number of independent channels determines how many signals can be processed simultaneously. |
| Number of Inputs per Circuit | 1 | 2 (trigger inputs) | Input count affects how the device interfaces with surrounding logic and the complexity of the control signals required. |
| Number of Outputs per Circuit | 1 | 2 (Q and Qbar) | Output configuration determines available signal polarities and fan-out options for downstream circuitry. |
| Supply Voltage Range | 4.5 V to 5.5 V | 4.5 V to 5.5 V | Both are HCT-family devices designed for 5 V TTL-compatible systems, so they share the same supply requirements. |
| Logic Family | HCT | HCT | The logic family determines input threshold compatibility with TTL and CMOS signal levels. |
| Output Type | CMOS (push-pull) | CMOS (push-pull) | Output drive type affects the ability to drive loads and interface with other logic stages. |
| Mounting Type | Surface Mount | Surface Mount | Mounting type must match the PCB assembly process and available board space. |
| Package / Case | SOIC-14 | SOIC-16 | Package footprint and pin count must match the PCB layout; different pin counts prevent direct drop-in replacement. |
| Operating Temperature Range | -40 °C to +125 °C | -40 °C to +125 °C | The temperature range defines the environments in which the device can reliably operate. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | 74HCT04D | 74HCT221D,118 |
|---|---|---|
| Supplier | - | Nexperia USA Inc. |
| Series | 74HCT | 74HCT |
| Part Status | Active | Active |
| Logic Type | Inverter | Monostable |
| Independent Circuits | - | 2 |
| Schmitt Trigger Input | - | Yes |
| Propagation Delay | - | 31 ns |
| Current - Output High Low | 4mA, 4mA | 4mA, 4mA |
| Voltage - Supply | 4.5V ~ 5.5V | 4.5 V ~ 5.5 V |
| Operating Temperature | -40°C ~ 125°C | -40°C ~ 125°C |
| Mounting Type | Surface Mount | Surface Mount |
| Number of Circuits | 6 | - |
| Number of Inputs | 1 | - |
| Current - Quiescent (Max) | 1 µA | - |
| Logic Level - Low | 0.8V | - |
| Logic Level - High | 2V | - |
| Max Propagation Delay @ V Max CL | 16ns @ 5.5V, 50pF | - |
The 74HCT04D is a hex inverter containing six independent NOT gates, each providing a single logic inversion. The 74HCT221D,118 is a dual monostable multivibrator (one-shot) with Schmitt-trigger inputs, designed to generate output pulses of a defined width when triggered. They serve fundamentally different logic functions and are not functionally interchangeable.
No. The 74HCT04D is typically supplied in a 14-pin SOIC package with a standard hex-inverter pinout (inputs on pins 1, 3, 5, 9, 11, 13; outputs on pins 2, 4, 6, 8, 10, 12; VCC on pin 14; GND on pin 7). The 74HCT221D,118 is supplied in a 16-pin SOIC package with a different pinout that includes trigger, reset, and timing pins. They cannot be dropped into the same PCB footprint.
No. The 74HCT04D is a combinational logic inverter and has no internal timing or monostable function. The 74HCT221D,118 requires external timing components (R and C) to set pulse width and provides retriggerable/non-retriggerable one-shot operation. A simple inverter cannot replicate the monostable timing behavior without additional external circuitry.
Yes. Both the 74HCT04D and the 74HCT221D,118 are HCT-family devices specified for a nominal 5 V supply, with a recommended operating supply voltage range of 4.5 V to 5.5 V. They are also characterized for operation over the standard industrial temperature range of -40 °C to +85 °C (or +125 °C depending on the specific manufacturer variant).
The 74HCT04D has standard CMOS-compatible input thresholds referenced to VCC (typically 1.4 V at 5 V). The 74HCT221D,118 features Schmitt-trigger inputs on its trigger inputs, providing defined positive-going and negative-going threshold voltages with hysteresis, which improves noise immunity for slow or noisy input edges. This is a key difference when interfacing with analog or slow-rising signals.
The 74HCT221D,118 is better suited for switch debouncing because its monostable function can generate a single clean output pulse of defined width from a noisy or bouncing input, and its Schmitt-trigger inputs add hysteresis. The 74HCT04D can be used in a simple RC debounce network, but it does not provide the same level of noise immunity or precise pulse-width control without additional components.
Both devices are HCT-family logic and typically provide standard CMOS output drive. The 74HCT04D is commonly specified with ±4 mA output drive at 5 V. The 74HCT221D,118 is also typically specified with ±4 mA output drive. However, exact drive currents can vary by manufacturer, so the specific datasheet for the ordered part number should be consulted for guaranteed limits.
No. The 74HCT221D,118 is a monostable multivibrator, not an inverter. While it contains internal logic that may invert signals as part of its timing function, it cannot be configured to act as a simple combinational NOT gate. Using it as an inverter would require external timing components and would produce a pulse output rather than a continuous inverted logic level.