74VHC245FT
도시바 반도체 및 스토리지
- Lifecycle
- Active
- Stock
- 4188 PCS
- Package
- TSSOP-20
- Series
- 논리 - 버퍼, 드라이브, 수신기, 트랜시버
74VHC245FT과 74VHCT574AMTC에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.
Replacement verdict
The 74VHC245FT and 74VHCT574AMTC are functionally incompatible devices that cannot serve as substitutes for one another. The 74VHC245FT is an octal bidirectional bus transceiver with dual enable control, while the 74VHCT574AMTC is an octal D-type flip-flop with 3-state outputs and edge-triggered clocking. They differ in logic function, control architecture, pinout, and package type, making direct replacement impossible without circuit redesign.
도시바 반도체 및 스토리지
비조 반도체 회사
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | 74VHC245FT | 74VHCT574AMTC | Why it matters |
|---|---|---|---|
| Logic Function | Octal Bus Transceiver, 3-State | Octal D-Type Flip-Flop, 3-State | These are fundamentally different logic functions; a transceiver cannot substitute for a flip-flop in sequential circuits. |
| Logic Family | VHC (Very High Speed CMOS) | VHCT (VHC with TTL-Compatible Inputs) | VHCT inputs are TTL-voltage compatible, while VHC inputs are CMOS-level; this affects interfacing with TTL logic. |
| Input Voltage Compatibility | CMOS-level inputs (Vih ~ 0.7 x VCC) | TTL-compatible inputs (Vih ~ 2.0 V) | TTL compatibility allows direct interfacing with 5 V TTL logic without level shifting. |
| Number of Bits | 8 (octal) | 8 (octal) | Both handle 8 bits, so bus width is equivalent, but the data flow behavior differs. |
| Output Type | 3-State | 3-State | Both support high-impedance output for bus sharing, but the control logic differs. |
| Direction Control | Bidirectional (DIR pin) | Unidirectional (data flows D to Q on clock edge) | Bidirectional capability is essential for bus transceiver applications; flip-flops are unidirectional. |
| Clock Requirement | None (combinational) | Edge-triggered clock input | Combinational logic responds immediately; flip-flops require a clock edge, changing timing behavior. |
| Propagation Delay (typical) | ~3.5 ns at 5 V | ~5.5 ns at 5 V | Different delays affect timing margins in high-speed designs. |
| Supply Voltage Range | 2.0 V to 5.5 V | 4.5 V to 5.5 V | VHC operates over a wider voltage range, while VHCT is limited to 5 V systems. |
| Package | TSSOP-20 | TSSOP-20 | Same package footprint allows PCB compatibility, but pin functions differ. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | 74VHC245FT | 74VHCT574AMTC |
|---|---|---|
| Supplier | - | Rochester Electronics, LLC |
| Series | 74VHC | 74VHCT |
| Part Status | Active | Active |
| Function | - | Standard |
| Type | - | D-Type |
| Output Type | 3-State | Tri-State, Non-Inverted |
| Number of Elements | 1 | 1 |
| Number of Bits per Element | 8 | 8 |
| Clock Frequency | - | 130 MHz |
| Max Propagation Delay @ V Max CL | - | 10.4ns @ 5V, 50pF |
| Trigger Type | - | Positive Edge |
| Current - Output High Low | 8mA, 8mA | 8mA, 8mA |
| Voltage - Supply | 2V ~ 5.5V | 4.5V ~ 5.5V |
| Current - Quiescent (Iq) | - | 4 µA |
| Input Capacitance | - | 4 pF |
| Operating Temperature | -40°C ~ 125°C (TA) | -40°C ~ 85°C (TA) |
| Mounting Type | Surface Mount | Surface Mount |
| Logic Type | Transceiver, Non-Inverting | - |
The 74VHC245FT is an octal bidirectional transceiver with 3-state outputs, designed for asynchronous two-way data transfer. The 74VHCT574AMTC is an octal D-type flip-flop with 3-state outputs, providing edge-triggered storage of data. The 74VHC245FT is a combinational bus interface device, while the 74VHCT574AMTC is a sequential logic register.
No. The 74VHC245FT is typically supplied in a TSSOP-20 package, while the 74VHCT574AMTC is supplied in a TSSOP-20 package as well, but their pin functions differ. The 74VHC245FT has direction control (DIR) and output enable (OE) pins, whereas the 74VHCT574AMTC has clock (CP), output enable (OE), and data inputs. They are not direct substitutes without circuit redesign.
The 74VHC245FT is a VHC-family device with CMOS-level inputs, typically specified with VIH of 2.0 V minimum at VCC = 3.0 V to 5.5 V. The 74VHCT574AMTC is a VHCT-family device with TTL-compatible inputs, typically specified with VIH of 2.0 V minimum and VIL of 0.8 V maximum, allowing direct interfacing with 5 V TTL logic while operating at 5 V VCC.
Both devices are specified for operation over a supply voltage range of 2.0 V to 5.5 V, with nominal 3.3 V or 5 V systems. However, the 74VHCT574AMTC is optimized for 5 V TTL-compatible systems, while the 74VHC245FT is optimized for CMOS-level systems. Verify the exact recommended operating conditions in the respective manufacturer datasheets.
The 74VHCT574AMTC, as a flip-flop, has a maximum clock frequency typically specified at 185 MHz at VCC = 5.0 V. The 74VHC245FT, as a transceiver, does not have a clock frequency specification; its propagation delay is typically 3.5 ns at VCC = 5.0 V. These parameters are not directly comparable due to different device functions.
Both devices typically provide ±8 mA output drive at VCC = 5.0 V, with symmetrical source and sink currents. This is consistent with standard VHC and VHCT family specifications. Confirm the exact IOH and IOL ratings from the manufacturer datasheet for the specific package and temperature grade.
The 74VHC245FT is commonly offered in TSSOP-20, and the 74VHCT574AMTC is also offered in TSSOP-20. However, the internal pin assignments differ, so they cannot be interchanged on the same PCB footprint without layout changes. Always verify the package suffix and mechanical dimensions from the manufacturer datasheet.
The 74VHC245FT is intended for bus isolation, signal buffering, and bidirectional data transfer between two buses. The 74VHCT574AMTC is intended for data storage, synchronization, and edge-triggered registration of parallel data. Selection depends on whether the application requires combinational bus switching or sequential data latching.