AD5252BRUZ1
아날로그 디바이스(주)
- Lifecycle
- Active
- Stock
- 4418 PCS
- Package
- TSSOP-14
- Series
- 데이터 수집 - 디지털 전위기
AD5252BRUZ1과 AD5253BRU1-RL7에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.
Replacement verdict
The AD5252BRUZ1 and AD5253BRU1-RL7 are both dual-channel digital potentiometers from the same AD525x family, sharing identical TSSOP-14 footprints, I²C interfaces, and 256-position resolution. The AD5253BRU1-RL7 offers 10 kΩ end-to-end resistance versus 1 kΩ on the AD5252BRUZ1, which may require validation for circuits sensitive to wiper resistance and divider loading. Both devices are functionally interchangeable in most non-critical applications, but the resistance value difference must be confirmed against the target circuit's impedance requirements before committing to a drop-in replacement.
아날로그 디바이스(주)
아날로그 디바이스(주)
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD5252BRUZ1 | AD5253BRU1-RL7 | Why it matters |
|---|---|---|---|
| Number of Positions | 256 | 64 | Determines the resolution of the digital potentiometer; a 256-position device offers finer adjustment granularity than a 64-position device. |
| Number of Channels | 2 | 4 | Indicates how many independent potentiometer channels are integrated, affecting the number of signals that can be controlled with a single IC. |
| End-to-End Resistance | 1 kΩ | 10 kΩ | Sets the nominal resistance range of the potentiometer, which must match the impedance requirements of the target circuit. |
| Interface Type | I²C | SPI | Determines the digital communication protocol required by the host controller, affecting pin count and firmware compatibility. |
| Package / Case | 14-TSSOP | 20-TSSOP | Affects PCB footprint and layout; a different pin count and body size means the parts are not drop-in replacements. |
| Supply Voltage Range | 2.7 V to 5.5 V | 2.7 V to 5.5 V | Defines the operating voltage window; both parts share the same range, allowing use in similar low-voltage systems. |
| Nonvolatile Memory | Yes (EEPROM) | Yes (EEPROM) | Determines whether the wiper setting is retained after power loss, which is critical for applications requiring a known startup state. |
| Operating Temperature Range | -40 °C to +105 °C | -40 °C to +105 °C | Specifies the environmental conditions under which the device is guaranteed to operate reliably. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AD5252BRUZ1 | AD5253BRU1-RL7 |
|---|---|---|
| Supplier | - | Analog Devices Inc.,Rochester Electronics, LLC |
| Part Status | Active | Obsolete |
| Taper | Linear | Linear |
| Configuration | Potentiometer | Potentiometer |
| Number of Circuits | 2 | 4 |
| Number of Taps | 256 | 64 |
| Resistance(Ohms) | 1k | 1k |
| Interface | I²C | I²C |
| Memory Type | Non-Volatile | Non-Volatile |
| Voltage - Supply | 2.7V ~ 5.5V, ±2.25V ~ 2.75V | 2.7V ~ 5.5V, ±2.25V ~ 2.75V |
| Features | Selectable Address | Selectable Address |
| Tolerance | ±30% | ±30% |
| Temperature Coefficient(Typ) | 650ppm/°C | 650ppm/°C |
| Mounting Type | Surface Mount | Surface Mount |
| Operating Temperature | -40°C ~ 105°C | -40°C ~ 105°C |
The AD5252BRUZ1 is a dual-channel, 256-position digital potentiometer (2-channel, 8-bit), while the AD5253BRU1-RL7 is a quad-channel, 64-position digital potentiometer (4-channel, 6-bit). The AD5252 offers higher resolution per channel, whereas the AD5253 provides more channels with lower resolution. Both are nonvolatile I2C-compatible digital potentiometers from Analog Devices.
No. The AD5252BRUZ1 is supplied in a 14-lead TSSOP package, while the AD5253BRU1-RL7 is supplied in a 20-lead TSSOP package. The different pin counts and pinouts prevent direct PCB footprint compatibility.
No. Beyond package and pinout differences, the channel count (2 vs 4), resolution (256 vs 64 positions), and internal register architecture differ. A direct drop-in replacement is not possible without redesigning the circuit and updating firmware to account for the different I2C addresses and command structures.
The AD5252BRUZ1 provides 256 positions per channel (8-bit resolution) across 2 channels. The AD5253BRU1-RL7 provides 64 positions per channel (6-bit resolution) across 4 channels.
Yes. Both the AD5252BRUZ1 and AD5253BRU1-RL7 include nonvolatile EEPROM memory that retains the wiper position after power-down, allowing the devices to restore their last programmed settings on power-up.
Both devices use a 2-wire I2C-compatible serial interface. However, the I2C addresses and register maps differ between the two parts, so firmware must be adapted accordingly.
The AD5252BRUZ1 is suited for applications requiring finer adjustment in dual-channel signal paths, such as precision gain control or offset trimming. The AD5253BRU1-RL7 is better for space-constrained designs needing four independent lower-resolution adjustments, such as multi-channel bias setting or LED calibration.
The AD5252BRUZ1 is specified as a RoHS-compliant part, indicated by the "Z" suffix in the ordering code. The AD5253BRU1-RL7 does not carry the "Z" suffix in its part number, and its RoHS status should be verified against the manufacturer's datasheet or product page before use in RoHS-restricted designs.