AD538ADZ vs AD538BDZ

AD538ADZ과 AD538BDZ에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The AD538ADZ and AD538BDZ are functionally equivalent analog computational units sharing identical architecture, pinout, and transfer function, with the BDZ grade offering tightened accuracy specifications. Both are direct replacements in existing sockets, though the BDZ grade is preferred for applications demanding higher computational precision.

Function Architecture High match
Package Type High match
Pin Configuration High match
Accuracy Grade Validation required

Parts at a glance

Part A

AD538ADZ

아날로그 디바이스(주)

Lifecycle
Active
Stock
3216 PCS
Package
SB-CDIP-18
Series
선형 - 아날로그 곱셈기, 나눗셈기
Part B

AD538BDZ

아날로그 디바이스(주)

Lifecycle
Active
Stock
4035 PCS
Package
CDIP-18
Series
선형 - 아날로그 곱셈기, 나눗셈기

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AD538ADZ AD538BDZ Why it matters
Grade / Temperature Range Commercial (0°C to +70°C) Industrial (-40°C to +85°C) The B-grade supports a wider operating temperature range, making it suitable for industrial environments where the A-grade commercial part may not be specified.
Total Error (VOUT = 10V, 25°C) ±1.0% max ±0.5% max The B-grade offers tighter guaranteed accuracy, which directly affects the precision of multiplication, division, and exponentiation results.
Error vs Temperature ±0.5% max (0°C to +70°C) ±0.5% max (-40°C to +85°C) Both grades hold the same drift spec, but the B-grade guarantees it over a wider temperature span, improving stability in harsh conditions.
Operating Temperature Range 0°C to +70°C -40°C to +85°C Determines whether the part can be used in industrial or outdoor applications versus benign commercial environments.
Storage Temperature Range -65°C to +150°C -65°C to +150°C Identical storage limits mean both parts can be handled and warehoused under the same conditions.
Package 20-Lead SOIC (R-20) 20-Lead SOIC (R-20) Same package and pinout allow drop-in replacement on an existing PCB without layout changes.
Supply Voltage ±15 V nominal ±15 V nominal Identical supply requirements mean the same power rails can be used for either grade.
Supply Current ±6 mA typ ±6 mA typ Same quiescent current means no change in power budget when substituting one grade for the other.
Input Offset Voltage ±0.5 mV typ ±0.25 mV typ Lower offset in the B-grade improves DC accuracy of the analog computation, especially for small input signals.
Nonlinearity ±0.25% max ±0.1% max Better nonlinearity in the B-grade yields more accurate transfer function across the full input range.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AD538ADZ AD538BDZ
Supplier - Analog Devices Inc.
Part Status Active Active
Function Analog Computational Unit Analog Computational Unit
Number of Bits / Stages 1-Quadrant 1-Quadrant

Frequently asked questions

What is the primary difference between the AD538ADZ and AD538BDZ?

The AD538ADZ and AD538BDZ are both members of the Analog Devices AD538 real-time analog computational unit family. The primary difference is their specified operating temperature range and corresponding grade. The AD538ADZ is specified for the commercial temperature range of 0°C to +70°C, while the AD538BDZ is specified for the industrial temperature range of -40°C to +85°C. Both are housed in a 28-lead side-brazed ceramic DIP (DZ suffix).

Are the AD538ADZ and AD538BDZ functionally identical?

Yes. Both devices implement the same analog computational core, providing multiplication, division, squaring, square rooting, and exponentiation (log/antilog) functions. The functional block diagram, pinout, and transfer equations are identical across both grades. The only guaranteed difference is the temperature grade and the associated electrical specifications over that range.

Can the AD538ADZ and AD538BDZ be used interchangeably in a design?

They can be used interchangeably only if the application's operating temperature range falls entirely within 0°C to +70°C and the electrical performance of the AD538ADZ grade is sufficient. For applications requiring operation below 0°C or above +70°C, the AD538BDZ must be used. Always verify that the selected grade meets the required accuracy, drift, and temperature specifications for the target design.

What package type do the AD538ADZ and AD538BDZ use?

Both the AD538ADZ and AD538BDZ are supplied in a 28-lead ceramic side-brazed dual in-line package (DIP). The "DZ" suffix in both part numbers denotes this package and the ceramic construction. The package is hermetically sealed and is suitable for through-hole mounting.

Do the AD538ADZ and AD538BDZ have the same pinout?

Yes. The pinout for the AD538ADZ and AD538BDZ is identical because they share the same die and package. Pin functions such as VX, VY, VZ, VO, and the log/antilog inputs and outputs are located on the same pins for both grades. This allows a common PCB layout to accommodate either grade.

What are the key electrical specifications that differ between the AD538ADZ and AD538BDZ?

The key differing specifications are those guaranteed over the respective temperature ranges. The AD538BDZ is tested and guaranteed to meet its accuracy, linearity, and drift specifications over the full -40°C to +85°C industrial range. The AD538ADZ is guaranteed only over 0°C to +70°C. Parameters such as total error, gain error, and offset voltage may have different maximum limits or may only be guaranteed over the narrower commercial range for the AD538ADZ.

Are the AD538ADZ and AD538BDZ RoHS compliant?

Compliance status must be verified from the manufacturer's official documentation or a trusted distributor's product page. Analog Devices part numbers with the "Z" suffix typically indicate RoHS-compliant packaging, but the specific compliance declaration for the AD538ADZ and AD538BDZ should be confirmed against the latest datasheet or product compliance report. Do not assume compliance without verification.

Which grade should be selected for a new design, AD538ADZ or AD538BDZ?

Selection depends on the required operating temperature range and the required accuracy over that range. If the design operates only within 0°C to +70°C and the AD538ADZ specifications are adequate, it may be selected. If the design must operate over the industrial range of -40°C to +85°C, the AD538BDZ is required. Always review the latest datasheet to confirm that the chosen grade meets all electrical and environmental requirements.