AD736ARZ vs AD736KR-REEL

AD736ARZ과 AD736KR-REEL에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The AD736ARZ and AD736KR-REEL are functionally equivalent RMS-to-DC converters sharing the same core architecture, pinout, and operating principle, making the AD736ARZ a viable replacement candidate for the AD736KR-REEL in most applications. Designers should validate grade-dependent specifications such as accuracy and temperature performance against their specific circuit requirements before final qualification.

Package Type High match
Pin Configuration High match
Accuracy Grade Validation required
Operating Temperature Range Validation required

Parts at a glance

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AD736ARZ AD736KR-REEL Why it matters
Package / Mounting Type 8-Lead SOIC (surface mount) 8-Lead SOIC (surface mount), supplied on reel Both are SOIC surface-mount, but the reel packaging affects assembly line handling and pick-and-place feeding rather than electrical function.
Temperature Range (Operating) -40°C to +85°C (industrial) 0°C to +70°C (commercial) The wider industrial range of the ARZ allows use in harsher environments, while the KR grade is limited to commercial temperature conditions.
Grade / Accuracy Class A grade (industrial) K grade (commercial) The grade designation reflects tested accuracy and temperature performance; substituting one grade for another may affect measurement precision over temperature.
Function RMS-to-DC converter (true RMS) RMS-to-DC converter (true RMS) Both perform the same core true-RMS-to-DC conversion function, which is the primary basis for functional substitutability.
Supply Voltage ±2.8 V to ±16.5 V (dual supply) ±2.8 V to ±16.5 V (dual supply) Identical supply range means both can operate in the same circuit power configuration without redesign.
Input Signal Range Up to 200 mV RMS (typical full-scale) Up to 200 mV RMS (typical full-scale) Matching input range ensures the same signal levels can be measured without additional attenuation or gain stages.
Output Type Buffered voltage output Buffered voltage output A buffered output allows direct interface to ADCs or downstream circuitry in both parts, supporting drop-in substitution.
Pin Count 8 pins 8 pins Identical pin count and SOIC footprint support PCB layout compatibility between the two parts.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AD736ARZ AD736KR-REEL
Part Status Active Obsolete
Supply Current 160 µA 160 µA
Voltage - Supply 2.8V, -3.2V ~ ±16.5V 2.8V, -3.2V ~ ±16.5V
Mounting Type Surface Mount Surface Mount

Frequently asked questions

What are the key differences between the AD736ARZ and AD736KR-REEL?

The AD736ARZ is supplied in an 8-lead SOIC package with a tube packaging option, while the AD736KR-REEL is supplied in an 8-lead SOIC package on a 13-inch reel for automated assembly. Both are RMS-to-DC converters from Analog Devices with the same core function, but the suffix and packaging differ to suit different production and handling requirements.

Do the AD736ARZ and AD736KR-REEL have the same electrical specifications?

Both devices are members of the AD736 family of low power, true RMS-to-DC converters and share the same functional block diagram and pinout. However, the AD736ARZ and AD736KR-REEL differ in grade and packaging; designers should consult the respective Analog Devices datasheet ordering guide to confirm the exact temperature range, accuracy grade, and packaging specifications for each orderable part number.

Are the AD736ARZ and AD736KR-REEL pin-compatible?

Yes. Both parts are offered in the same 8-lead SOIC package with an identical pinout, so they are pin-compatible when the package and grade requirements of the target design are satisfied. PCB land patterns for the 8-lead SOIC body are the same for both orderable part numbers.

What is the difference between the ARZ and KR suffixes on the AD736?

The suffix identifies the package, temperature grade, and packaging option. The AD736ARZ uses the SOIC package with the "ARZ" grade designation and is typically supplied in tubes, while the AD736KR-REEL uses the "KR" grade designation and is supplied on a reel for high-volume automated placement. The exact grade and temperature range for each suffix should be verified in the Analog Devices datasheet ordering guide.

Can the AD736KR-REEL be used as a drop-in replacement for the AD736ARZ?

Because both are 8-lead SOIC devices with the same pinout and core RMS-to-DC function, the AD736KR-REEL can generally serve as a drop-in replacement for the AD736ARZ provided the grade, temperature range, and accuracy specifications of the KR grade meet the application requirements. The designer should confirm the grade specifications against the datasheet before substitution.

Which part is better suited for high-volume automated assembly?

The AD736KR-REEL is supplied on a 13-inch reel, making it the appropriate choice for high-volume automated pick-and-place assembly lines. The AD736ARZ is typically supplied in tubes, which is more suitable for low-volume or prototype builds. Both use the same 8-lead SOIC package footprint.

What are the common applications for the AD736 RMS-to-DC converter?

The AD736 family is used for true RMS-to-DC conversion in applications such as precision rectifiers, AC measurement instruments, panel meters, and signal processing where accurate RMS values of complex waveforms are required. Both the AD736ARZ and AD736KR-REEL share this application profile because they are members of the same product family.

Where can I verify the exact specifications for each orderable part number?

Exact specifications, including grade, temperature range, accuracy, and packaging, should be verified against the official Analog Devices AD736 datasheet and the ordering guide, or through authorized distributors such as DigiKey, Mouser, or TTI. Always confirm the orderable part number details before design release or procurement.