AD7634BSTZ
아날로그 디바이스(주)
- Lifecycle
- Active
- Stock
- 7383 PCS
- Package
- LQFP-48
- Series
- 데이터 수집 - 아날로그 변환기(ADC)
AD7634BSTZ과 AD7634BSTZRL에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.
Replacement verdict
The AD7634BSTZ and AD7634BSTZRL are functionally identical, differing only in packaging format (tube vs. tape and reel). Both share the same 18-bit SAR ADC architecture, 250 kSPS throughput, ±10 V input range, and 48-lead LQFP package, making them interchangeable for design and production purposes. The tape and reel variant is recommended for automated assembly lines, while the tube variant suits low-volume or prototyping needs.
아날로그 디바이스(주)
아날로그 디바이스(주)
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD7634BSTZ | AD7634BSTZRL | Why it matters |
|---|---|---|---|
| Resolution | 18 bits | 18 bits | Determines the quantization step and achievable dynamic range; identical resolution means equivalent measurement precision. |
| Sampling Rate | 670 kSPS | 670 kSPS | Sets the maximum throughput for the ADC; identical rates ensure the same signal bandwidth capability. |
| Input Type | Differential | Differential | Differential inputs improve common-mode noise rejection and dynamic performance; matching types preserves signal-chain compatibility. |
| Architecture | SAR | SAR | Successive-approximation architecture defines latency and power behavior; identical architecture ensures equivalent timing characteristics. |
| Supply Voltage | 5 V (analog and digital) | 5 V (analog and digital) | Determines power-rail requirements and interface levels; matching supplies allow drop-in substitution without rail changes. |
| Interface | SPI / Parallel | SPI / Parallel | Defines how the host reads conversion data; identical interfaces ensure firmware and pinout compatibility. |
| Package / Mounting | 48-LQFP, Surface Mount | 48-LQFP, Surface Mount | Footprint and assembly process must match for board-level interchangeability; identical packages allow direct replacement. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | Defines the environmental envelope for reliable operation; matching ranges ensure equivalent application suitability. |
| Packaging / Ordering Format | Tray / Tube (individual units) | Tape and Reel (RL suffix) | Affects manufacturing handling and pick-and-place automation; the RL variant is reeled for high-volume assembly while the base part is supplied in trays/tubes. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AD7634BSTZ | AD7634BSTZRL |
|---|---|---|
| Supplier | - | Analog Devices Inc. |
| Series | iCMOS®, PulSAR® | iCMOS®, PulSAR® |
| Part Status | Active | Obsolete |
| Number of Bits | 18 | 18 |
| Sampling Rate(Per Second) | 670k | 670k |
| Number of Inputs | 1 | 1 |
| Input Type | Differential | Differential |
| Data Interface | SPI, Parallel, DSP | SPI, Parallel, DSP |
| Configuration | S/H-ADC | S/H-ADC |
| Ratio - S / H: ADC | 1:1 | 1:1 |
| Number of A/D Converters | 1 | 1 |
| Architecture | SAR | SAR |
| Reference Type | External, Internal | External, Internal |
| Voltage - Supply, Analog | 5V | 5V |
| Voltage - Supply, Digital | 5V | 5V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
The AD7634BSTZ and AD7634BSTZRL are the same Analog Devices 18-bit, 670 kSPS PulSAR analog-to-digital converter in a 48-lead LQFP package. The suffix "RL" denotes tape-and-reel packaging, while the non-RL part is supplied in trays. Electrical performance and die are identical.
Yes. Both order codes refer to the same silicon device (AD7634, 18-bit, 670 kSPS, bipolar input, PulSAR architecture) in the same 48-lead LQFP package. The only difference is the shipping format (tray vs. tape-and-reel), so they are drop-in interchangeable in a given design.
The AD7634 is an 18-bit successive-approximation ADC with a throughput of 670 kSPS, a bipolar ±10 V input range (with additional programmable ranges), an on-chip reference and reference buffer, and a parallel and serial interface. It operates from a 5 V analog supply with a separate digital supply and is specified over the −40 °C to +85 °C industrial temperature range.
Both parts are offered in the 48-lead LQFP (low-profile quad flat package) designated by the "STZ" suffix in the order code. The package, pinout, and PCB land pattern are identical between the two order codes.
The AD7634BSTZRL is supplied on tape-and-reel, which is preferred for automated high-volume SMT assembly lines and pick-and-place equipment. The AD7634BSTZ in trays is typically used for prototyping, low-volume runs, or manual assembly.
Yes. Both order codes map to the same AD7634 product datasheet and the same evaluation board and software support from Analog Devices, since they are packaging variants of one device.
Both the AD7634BSTZ and AD7634BSTZRL are classified at MSL 3 per JEDEC J-STD-020, consistent with the 48-lead LQFP body. This should be confirmed against the current Analog Devices datasheet or product page before finalizing reflow and bake-out procedures.