AD7656BSTZ
아날로그 디바이스(주)
- Lifecycle
- Active
- Stock
- 3438 PCS
- Package
- LQFP-64
- Series
- 데이터 수집 - 아날로그 변환기(ADC)
AD7656BSTZ과 AD7655AST에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.
Replacement verdict
The AD7656BSTZ and AD7655AST are not drop-in replacements for one another. The AD7656BSTZ is a six-channel simultaneous-sampling bipolar ADC in a 64-lead LQFP, while the AD7655AST is a four-channel part in a 48-lead LQFP with a different analog input architecture and channel count. Board-level redesign, revised channel routing, and firmware re-validation would be required before substitution.
아날로그 디바이스(주)
아날로그 디바이스(주)
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD7656BSTZ | AD7655AST | Why it matters |
|---|---|---|---|
| Number of ADC Channels | 6 | 4 | Channel count determines how many independent analog signals can be sampled simultaneously, directly affecting system architecture and board space. |
| Resolution | 16 bits | 16 bits | Resolution sets the smallest detectable signal change; both are 16-bit, so precision class is equivalent. |
| Maximum Sampling Rate | 250 kSPS | 1 MSPS | Throughput limits the highest input frequency that can be captured; the AD7655 supports faster sampling per channel. |
| Input Type | Single-ended | Pseudo-differential | Input configuration affects noise immunity and how sensor or signal sources must be interfaced to the converter. |
| Supply Voltage (Analog) | 5 V | 5 V | Analog supply defines the input signal range and must match the surrounding analog front-end design. |
| Interface | Parallel / Serial (SPI) | Parallel | Available digital interfaces determine compatibility with the host processor and PCB routing complexity. |
| Package | 64-Lead LQFP | 48-Lead LQFP | Package footprint and pin count affect board layout and whether a drop-in replacement is physically possible. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | Temperature range confirms suitability for industrial environments; both parts share the same industrial rating. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AD7656BSTZ | AD7655AST |
|---|---|---|
| Supplier | - | Rochester Electronics, LLC |
| Series | iCMOS® | PulSAR® |
| Part Status | Active | Obsolete |
| Number of Bits | 16 | 16 |
| Sampling Rate(Per Second) | 250k | 1M |
| Number of A/D Converters | 6 | 1 |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
| Number of Inputs | 6 | - |
| Input Type | Single Ended | - |
| Data Interface | SPI, Parallel, DSP | - |
| Configuration | S/H-ADC | - |
| Ratio - S / H: ADC | 1:1 | - |
| Architecture | SAR | - |
| Reference Type | External, Internal | - |
| Voltage - Supply, Analog | 5V | - |
| Voltage - Supply, Digital | 5V | - |
| Features | Simultaneous Sampling, True Bipolar | - |
The AD7656BSTZ is a 16-bit, 6-channel simultaneous-sampling SAR ADC offering 250 kSPS per channel, while the AD7655AST is a 16-bit, 4-channel simultaneous-sampling SAR ADC offering 500 kSPS per channel. The AD7656BSTZ provides more channels at half the per-channel throughput, whereas the AD7655AST provides fewer channels at twice the per-channel throughput.
No. The AD7656BSTZ is supplied in a 64-lead LQFP package, while the AD7655AST is supplied in a 48-lead LQFP package. The differing lead counts and pin assignments mean the two devices are not footprint-compatible and cannot be interchanged on the same PCB land pattern.
Both devices support selectable analog input ranges of ±10 V, ±5 V, and 0 V to 10 V, making them suitable for industrial bipolar and unipolar signal acquisition. The input range is configured via the device control interface.
The AD7656BSTZ offers six simultaneous-sampling channels at 250 kSPS each, giving an aggregate throughput of 1.5 MSPS. The AD7655AST offers four simultaneous-sampling channels at 500 kSPS each, giving an aggregate throughput of 2 MSPS. Selection depends on whether channel count or per-channel sampling rate is the priority.
Both devices provide a parallel interface and a serial interface for connection to host processors and DSPs. The parallel interface supports word and byte modes, and the serial interface provides a high-speed SPI-compatible connection.
Both devices operate from a 5 V analog supply (AVDD) and a separate digital supply (DVDD) that supports interfacing to 3 V or 5 V logic. They also require an external reference or the internal reference, and the AD7656BSTZ additionally uses a high-voltage supply arrangement for its bipolar input capability.
No. The AD7655AST has fewer channels (4 versus 6), a different package (48-lead versus 64-lead LQFP), a different pinout, and a different per-channel throughput (500 kSPS versus 250 kSPS). A direct drop-in replacement is not possible; any substitution requires a PCB redesign and firmware changes validated against the manufacturer datasheets.
Yes. Both the AD7656BSTZ and the AD7655AST are specified for operation over the industrial temperature range of −40 °C to +85 °C, as stated in their respective manufacturer datasheets.