AD8022ARZ vs AD8021AR-REEL

AD8022ARZ과 AD8021AR-REEL에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The AD8022ARZ and AD8021AR-REEL are both high-speed voltage-feedback operational amplifiers from Analog Devices sharing a dual/single-channel family lineage, but they are not pin-identical drop-in substitutes. The AD8022ARZ is a dual-channel device in an 8-lead SOIC package, while the AD8021AR-REEL is a single-channel device in an 8-lead SOIC package with a different pinout. Designers must verify channel count, pinout, and supply/bandwidth requirements before substituting; the AD8022ARZ is best suited where two matched amplifiers are needed, whereas the AD8021AR-REEL targets single-channel low-noise, high-speed signal chains.

Channel Count Validation required
Pinout Configuration Validation required
Package Type High match
Bandwidth and Supply Range Validation required

Parts at a glance

Part A

AD8022ARZ

아날로그 디바이스(주)

Lifecycle
Active
Stock
5879 PCS
Package
SOIC-8
Series
선형 증폭기 - 계측기, 연산 증폭기, 완충 증폭기
Part B

AD8021AR-REEL

아날로그 디바이스(주)

Lifecycle
Active
Stock
188 PCS
Package
SOIC-8
Series
선형 증폭기 - 계측기, 연산 증폭기, 완충 증폭기

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AD8022ARZ AD8021AR-REEL Why it matters
Number of Amplifiers 2 (Dual) 1 (Single) Channel count determines whether one package can serve two signal paths or only one, directly affecting board layout and part count.
-3 dB Bandwidth 100 MHz 490 MHz Bandwidth sets the maximum signal frequency the amplifier can handle with acceptable gain, critical for high-speed signal chains.
Slew Rate 100 V/µs 470 V/µs Slew rate limits how fast the output can track large signal swings; higher slew rate supports faster, larger-amplitude signals.
Input Voltage Noise Density 2.5 nV/√Hz 2.1 nV/√Hz Lower input noise improves signal-to-noise ratio in low-level signal amplification, affecting precision of the overall system.
Supply Current per Amplifier 4 mA 7.8 mA Quiescent current impacts power budget and thermal design, especially in multi-channel or power-sensitive applications.
Input Offset Voltage (max) 1.5 mV 1 mV Offset voltage contributes DC error; tighter offset improves accuracy in precision and DC-coupled applications.
Package Type 8-Lead SOIC 8-Lead SOIC Package footprint and pinout must match for physical board compatibility, though internal pin functions differ between single and dual devices.
Supply Voltage Range ±2.5 V to ±12 V ±2.5 V to ±12 V Operating supply range determines compatibility with the system's power rails and headroom requirements.
Output Current 50 mA 60 mA Output drive capability affects the ability to drive low-impedance loads such as cables or ADC inputs without distortion.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AD8022ARZ AD8021AR-REEL
Supplier - Analog Devices Inc.,Rochester Electronics, LLC
Part Status Active Obsolete
Amplifier Type Voltage Feedback Voltage Feedback
Number of Circuits 2 1
Slew Rate 50V/µs 460V/µs
-3 dB Bandwidth 130 MHz 560 MHz
Current - Input Bias 2.5 µA 7.5 µA
Voltage - Input Offset 1.5 mV 400 µV
Supply Current 4mA 7.8mA
Current - Output / Channel 55 mA 70 mA
Voltage - Supply Span(Min) 4.5 V 4.5 V
Voltage - Supply Span(Max) 26 V 24 V
Operating Temperature -40°C ~ 85°C -40°C ~ 85°C
Mounting Type Surface Mount Surface Mount
Gain Bandwidth Product 100 MHz -

Frequently asked questions

What are the primary differences between the AD8022ARZ and the AD8021AR-REEL?

The AD8022ARZ is a dual, low-noise, high-speed voltage feedback operational amplifier, while the AD8021AR-REEL is a single, low-noise, high-speed voltage feedback operational amplifier. The AD8022ARZ integrates two amplifiers in one package, whereas the AD8021AR-REEL contains one amplifier and is supplied in tape-and-reel packaging for automated assembly.

Are the AD8022ARZ and AD8021AR-REEL pin-compatible?

No. The AD8022ARZ is a dual op amp in an 8-lead SOIC package, and the AD8021AR-REEL is a single op amp in an 8-lead SOIC package. Although both use the same package footprint, the pin functions differ because one device contains two amplifiers and the other contains one, so they are not direct drop-in replacements.

What are the key AC specifications of the AD8022ARZ?

The AD8022ARZ offers a -3 dB bandwidth of 130 MHz (G = +1), a slew rate of 120 V/µs, and a settling time of 0.1% in 35 ns. It also features low input voltage noise of 2.7 nV/√Hz and low distortion, making it suitable for high-speed signal conditioning and ADC driving.

What are the key AC specifications of the AD8021AR-REEL?

The AD8021AR-REEL provides a -3 dB bandwidth of 490 MHz (G = +1), a slew rate of 120 V/µs, and a settling time of 0.1% in 20 ns. It features input voltage noise of 2.1 nV/√Hz and is optimized for low-noise, high-speed applications such as professional video and test equipment.

What supply voltage ranges do these amplifiers support?

Both the AD8022ARZ and the AD8021AR-REEL operate from dual supplies of ±2.5 V to ±12 V, or single supplies of 5 V to 24 V. This wide supply range allows use in both low-voltage and higher-voltage signal chains.

Which device is better suited for multi-channel designs?

The AD8022ARZ is better suited for multi-channel designs because it integrates two independent amplifiers in a single 8-lead SOIC package, reducing board space and component count compared with using two AD8021AR-REEL single amplifiers.

Can the AD8021AR-REEL be used as a substitute for one channel of the AD8022ARZ?

Functionally, one AD8021AR-REEL amplifier can replace one channel of the AD8022ARZ in many circuits, but the substitution is not pin-compatible and requires a revised PCB layout. The designer must also verify that the different bandwidth, noise, and settling specifications meet the application requirements.

What packaging options are available for these parts?

The AD8022ARZ is supplied in an 8-lead SOIC package in tube or tray quantities. The AD8021AR-REEL is supplied in an 8-lead SOIC package in tape-and-reel format, which is intended for high-volume automated pick-and-place assembly.