AD817AR vs AD8170AR-REEL

AD817AR과 AD8170AR-REEL에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

AD817AR and AD8170AR-REEL are not functionally interchangeable: the AD817AR is a single high-speed voltage-feedback operational amplifier in an 8-lead SOIC package, while the AD8170AR-REEL is a 2:1 multiplexer-amplifier in a 14-lead SOIC package with a different pinout, channel architecture, and control interface. Substitution requires a full circuit redesign and cannot be treated as a drop-in replacement.

Different function type Different channel count Different package and pinout Different control interface

Parts at a glance

Part A

AD817AR

아날로그 디바이스(주)

Lifecycle
Active
Stock
2887 PCS
Package
SOIC-8
Series
선형 증폭기 - 계측기, 연산 증폭기, 완충 증폭기

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AD817AR AD8170AR-REEL Why it matters
Amplifier Type General-purpose voltage feedback op-amp Multiplexer amplifier (2:1 mux-amp) Defines the core function; a mux-amp cannot directly replace a plain op-amp in signal routing circuits.
-3 dB Bandwidth 50 MHz 250 MHz Determines the maximum signal frequency the device can handle with acceptable gain roll-off.
Slew Rate 350 V/µs 1000 V/µs Affects large-signal transient response and distortion at high frequencies.
Number of Channels 1 2 (multiplexed inputs) Channel count and input multiplexing capability determine how many signals can be routed through the device.
Supply Voltage Range ±5 V to ±15 V (dual) ±5 V to ±15 V (dual) Must match the system power rails for proper operation and signal headroom.
Input Offset Voltage (max) 0.5 mV 2 mV Lower offset improves DC accuracy in precision signal chains.
Package / Mounting 8-lead SOIC (surface mount) 8-lead SOIC (surface mount, tape and reel) Footprint and packaging form factor affect PCB layout and assembly compatibility.
Output Current 50 mA 50 mA Determines the load-driving capability for cables and low-impedance loads.
Multiplexer Control None TTL-compatible select pin The mux select input enables channel switching, a function absent in the plain op-amp.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AD817AR AD8170AR-REEL
Supplier - Rochester Electronics, LLC
Part Status Obsolete Obsolete
Applications - Multiplexer with Amplifier
Voltage - Supply - ±4V ~ 6V
Amplifier Type General Purpose -
Number of Circuits 1 -
Slew Rate 350V/µs -
Gain Bandwidth Product 50 MHz -
-3 dB Bandwidth 50 MHz -
Current - Input Bias 3.3 µA -
Voltage - Input Offset 500 µV -
Supply Current 7mA -
Current - Output / Channel 50 mA -
Voltage - Supply Span(Min) 5 V -
Voltage - Supply Span(Max) 36 V -
Operating Temperature -40°C ~ 85°C -
Mounting Type Surface Mount -

Frequently asked questions

Are the AD817AR and AD8170AR-REEL the same type of device?

No. The AD817AR is a high-speed, low-power operational amplifier from Analog Devices, while the AD8170AR-REEL is a high-speed, 8-lead SOIC video multiplexer/amplifier (a 2:1 multiplexer with an integrated output amplifier) from Analog Devices. They are functionally different devices despite similar part-number prefixes.

What are the key differences in function between the AD817AR and AD8170AR-REEL?

The AD817AR is a general-purpose voltage-feedback op amp intended for signal amplification, buffering, and active filtering. The AD8170AR-REEL is a 2:1 analog multiplexer with an internal output amplifier, designed for switching between two video or signal sources onto a single output, typically in video and display signal routing.

Can the AD817AR be used as a direct substitute for the AD8170AR-REEL?

No. The AD817AR is an operational amplifier and does not provide the 2:1 multiplexing function of the AD8170AR-REEL. Substitution would require external multiplexing circuitry and validation against the target design; the two parts are not pin-for-pin or function-for-function interchangeable.

Do the AD817AR and AD8170AR-REEL share the same package and pinout?

Both devices are offered in 8-lead SOIC (R-8) packages, but their pin functions differ because the AD8170AR-REEL includes multiplexer control and signal-select pins that the AD817AR op amp does not have. Pinout compatibility must be verified against the respective datasheets before any board-level substitution.

What supply voltage ranges do these parts support?

The AD817AR operates from dual supplies of ±5 V to ±15 V (or single supply of 10 V to 30 V). The AD8170AR-REEL operates from ±5 V dual supplies (or 10 V single supply). Designers should confirm the exact recommended operating conditions in the respective Analog Devices datasheets.

Are these devices suitable for video signal routing applications?

The AD8170AR-REEL is specifically intended for video multiplexing and signal routing, with a 2:1 multiplexer and output amplifier optimized for video bandwidth. The AD817AR is a general-purpose high-speed op amp that can be used in video signal chains for buffering or amplification but does not provide source selection on its own.

What does the "-REEL" suffix indicate on the AD8170AR-REEL?

The "-REEL" suffix indicates that the AD8170AR-REEL is supplied in tape-and-reel packaging for automated surface-mount assembly, rather than in tubes or trays. It does not change the electrical function of the device; the base part is the AD8170AR.

Which part should be selected for a design requiring signal switching between two inputs?

The AD8170AR-REEL should be selected when a 2:1 multiplexer with an integrated output amplifier is required, as it provides the switching function in a single 8-lead SOIC package. The AD817AR would require additional external switching components and is not a drop-in solution for that function.