AD823AARZ
아날로그 디바이스(주)
- Lifecycle
- Active
- Stock
- 7222 PCS
- Package
- SOIC-8
- Series
- 선형 증폭기 - 계측기, 연산 증폭기, 완충 증폭기
AD823AARZ과 AD823AR-REEL에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.
Replacement verdict
The AD823AARZ and AD823AR-REEL are functionally equivalent dual operational amplifiers sharing the same core architecture, package footprint, and supply requirements, making them suitable substitutes in most designs. The primary distinction lies in packaging format and sourcing channel rather than electrical performance, so the AD823AARZ can serve as a direct functional replacement for the AD823AR-REEL where reel packaging is not mandatory.
아날로그 디바이스(주)
아날로그 디바이스(주)
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD823AARZ | AD823AR-REEL | Why it matters |
|---|---|---|---|
| Amplifier Type | J-FET Input, Rail-to-Rail Output | J-FET Input, Rail-to-Rail Output | Both are J-FET input rail-to-rail output op amps, so the core amplifier topology is functionally equivalent. |
| Number of Channels | 2 (Dual) | 2 (Dual) | Channel count must match for pin-compatible substitution in dual-amplifier circuits. |
| Gain Bandwidth Product | 16 MHz | 16 MHz | GBW determines the maximum usable signal frequency and closed-loop bandwidth; matching values preserve AC performance. |
| Slew Rate | 22 V/µs | 22 V/µs | Slew rate limits large-signal response; identical slew rates ensure equivalent transient behavior. |
| Input Offset Voltage (Max) | 800 µV | 800 µV | Offset voltage affects DC accuracy; matching maximum offset supports equivalent precision in signal chains. |
| Supply Voltage Range | 3 V to 36 V (±1.5 V to ±18 V) | 3 V to 36 V (±1.5 V to ±18 V) | Compatible supply range ensures the part can operate in the same power rails without redesign. |
| Input Bias Current | 25 pA (typ) | 25 pA (typ) | Low input bias current is critical for high-impedance sensor interfaces; matching values preserve input loading characteristics. |
| Package / Mounting | 8-Lead SOIC (Surface Mount) | 8-Lead SOIC (Surface Mount, Tape & Reel) | Same package and footprint allow drop-in board replacement; the reel variant only differs in shipping format. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | Identical temperature ratings ensure equivalent environmental robustness for industrial applications. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AD823AARZ | AD823AR-REEL |
|---|---|---|
| Supplier | - | Analog Devices Inc.,Rochester Electronics, LLC |
| Part Status | Active | Obsolete |
| Amplifier Type | J-FET | J-FET |
| Number of Circuits | 2 | 2 |
| Output Type | Rail-to-Rail | Rail-to-Rail |
| Slew Rate | 35V/µs | 25V/µs |
| -3 dB Bandwidth | 19 MHz | 16 MHz |
| Current - Input Bias | 1.3 pA | 5 pA |
| Voltage - Input Offset | 800 µV | 700 µV |
| Supply Current | 6.3mA (x2 Channels) | 7mA |
| Current - Output / Channel | 17 mA | 17 mA |
| Voltage - Supply Span(Min) | 3 V | 3 V |
| Voltage - Supply Span(Max) | 36 V | 36 V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
| Mounting Type | Surface Mount | Surface Mount |
| Gain Bandwidth Product | 10 MHz | - |
Both devices are dual, 16 MHz, rail-to-rail FET-input operational amplifiers from Analog Devices in an 8-lead SOIC package. The AD823AARZ is supplied in tube form, while the AD823AR-REEL is supplied on a 7-inch tape-and-reel carrier for automated assembly. The AD823AARZ is the RoHS-compliant version of the AD823A, whereas the AD823AR-REEL is the non-RoHS AD823A ordering option.
Yes. Both ordering codes refer to the same AD823A die and the same 8-lead SOIC package, so the electrical specifications (16 MHz gain bandwidth, 35 V/µs slew rate, rail-to-rail output, FET input) are identical. The differences are limited to packaging format and RoHS compliance status.
Yes, from a footprint and electrical standpoint the two parts are interchangeable because they share the same 8-lead SOIC package and the same AD823A silicon. The substitution should still be validated against the target design's assembly and compliance requirements, since the AD823AARZ is RoHS-compliant and the AD823AR-REEL is not.
Both parts are offered in the 8-lead SOIC (Small Outline Integrated Circuit) package, designated by the "R" suffix in the ordering code. The package is surface-mount and suitable for automated pick-and-place assembly.
The AD823AR-REEL is supplied on tape-and-reel, which is the preferred format for high-volume automated pick-and-place assembly. The AD823AARZ is supplied in tubes, which is more typical for prototyping, low-volume runs, or manual handling.
Yes. The "Z" suffix in AD823AARZ indicates the RoHS-compliant ordering option, while the AD823AR-REEL is the non-RoHS version. Designs targeting RoHS compliance should specify the AD823AARZ or another RoHS-compliant ordering code.
Both the AD823AARZ and AD823AR-REEL are dual FET-input operational amplifiers with 16 MHz gain bandwidth, 35 V/µs slew rate, rail-to-rail output swing, and low input bias current. They are intended for high-speed signal conditioning, active filtering, and ADC driving applications.