AD8421BRZ vs AD8428ARZ-RL

AD8421BRZ과 AD8428ARZ-RL에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The AD8421BRZ and AD8428ARZ-RL are both precision instrumentation amplifiers from Analog Devices sharing a common SOIC-8 footprint and similar supply architecture, but they are not direct drop-in substitutes. The AD8421BRZ offers lower noise and wider bandwidth for general-purpose precision signal conditioning, while the AD8428ARZ-RL is a fixed-gain (G=2000) current-sense amplifier optimized for high-side shunt monitoring. Designers must validate gain configuration, input common-mode range, and bandwidth requirements before substituting one for the other in a given application.

Gain Configuration Validation required
Bandwidth Validation required
Package Type High match
Input Common-Mode Range Validation required

Parts at a glance

Part A

AD8421BRZ

아날로그 디바이스(주)

Lifecycle
Active
Stock
1263 PCS
Package
SOIC-8
Series
선형 증폭기 - 계측기, 연산 증폭기, 완충 증폭기
Part B

AD8428ARZ-RL

아날로그 디바이스(주)

Lifecycle
Active
Stock
4871 PCS
Package
SOIC-8
Series
선형 증폭기 - 계측기, 연산 증폭기, 완충 증폭기

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AD8421BRZ AD8428ARZ-RL Why it matters
Number of Amplifiers 1 1 Both are single-channel instrumentation amplifiers, so channel count is not a differentiator for substitutability.
Gain Bandwidth Product (GBW) 10 MHz 3.5 MHz Higher GBW allows the amplifier to maintain accurate gain at higher signal frequencies; the AD8421 supports wider-bandwidth signals.
Input Voltage Noise (1 kHz) 3 nV/√Hz 1.5 nV/√Hz Lower input voltage noise improves signal-to-noise ratio for low-level signals; the AD8428 is better suited to very low-noise applications.
Input Offset Voltage (max) 60 µV 25 µV Lower offset voltage reduces DC error at the output, which is critical for precision measurement and high-gain configurations.
Input Bias Current (max) 1 nA 3 nA Lower bias current minimizes errors when interfacing with high-impedance sources such as sensors and transducers.
CMRR (G=100, DC to 60 Hz) 120 dB 130 dB Higher common-mode rejection suppresses interference and ground noise; the AD8428 offers superior rejection for noisy environments.
Supply Voltage Range ±2.5 V to ±18 V ±4 V to ±18 V The wider low-end supply range of the AD8421 allows operation at lower supply voltages, affecting compatibility with low-voltage systems.
Quiescent Supply Current (max) 2.3 mA 6.5 mA Lower quiescent current reduces power consumption, which is important for battery-powered and thermally constrained designs.
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C Identical temperature ratings mean both parts are interchangeable for industrial temperature environments.
Package 8-Lead SOIC 8-Lead SOIC Matching package and pinout enables drop-in replacement on the same PCB footprint.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AD8421BRZ AD8428ARZ-RL
Supplier - Analog Devices Inc.,Rochester Electronics, LLC
Part Status Active Active
Amplifier Type Instrumentation Instrumentation
Number of Circuits 1 1
Slew Rate 35V/µs 50V/µs
-3 dB Bandwidth 10 MHz 3.5 MHz
Current - Input Bias 100 pA 200 nA
Voltage - Input Offset 25 µV 100 µV
Supply Current 2mA 6.5mA
Current - Output / Channel 65 mA 30 mA
Voltage - Supply Span(Min) 5 V 8 V
Voltage - Supply Span(Max) 36 V 36 V
Operating Temperature -40°C ~ 85°C -40°C ~ 85°C
Mounting Type Surface Mount Surface Mount

Frequently asked questions

What are the primary differences between the AD8421BRZ and AD8428ARZ-RL?

The AD8421BRZ is a low-power, low-noise instrumentation amplifier with a fixed gain of 10 and a bandwidth of 10 MHz, housed in an 8-lead SOIC package. The AD8428ARZ-RL is a high-speed, low-noise instrumentation amplifier with a fixed gain of 2000 and a bandwidth of 3.5 MHz, supplied in a 8-lead SOIC package on tape and reel. The AD8428ARZ-RL is optimized for high gain and low noise in applications such as current sensing, while the AD8421BRZ offers lower power consumption and wider bandwidth at lower gain.

Can the AD8421BRZ and AD8428ARZ-RL be used interchangeably in a design?

No, they are not directly interchangeable. The AD8421BRZ has a fixed gain of 10, whereas the AD8428ARZ-RL has a fixed gain of 2000. Additionally, their bandwidth, supply current, and input voltage noise specifications differ significantly. A redesign of the gain-setting network and verification of stability, bandwidth, and power budget would be required before substitution.

What are the supply voltage ranges for the AD8421BRZ and AD8428ARZ-RL?

Both the AD8421BRZ and AD8428ARZ-RL operate from dual supplies of ±2.5 V to ±18 V (or single supply of 5 V to 36 V). This wide supply range allows both parts to interface with a variety of signal sources and ADC input ranges.

How do the input voltage noise specifications compare between the AD8421BRZ and AD8428ARZ-RL?

The AD8421BRZ has an input voltage noise density of 3 nV/√Hz at 1 kHz. The AD8428ARZ-RL has an input voltage noise density of 1.5 nV/√Hz at 1 kHz. The AD8428ARZ-RL provides lower input-referred noise, which is beneficial for high-gain, low-level signal amplification.

What is the gain bandwidth product and fixed gain of each device?

The AD8421BRZ has a fixed gain of 10 and a -3 dB bandwidth of 10 MHz. The AD8428ARZ-RL has a fixed gain of 2000 and a -3 dB bandwidth of 3.5 MHz. The AD8421BRZ is suited for wider-bandwidth applications at moderate gain, while the AD8428ARZ-RL is intended for high-gain, low-frequency precision measurements.

What are the package and ordering differences between the AD8421BRZ and AD8428ARZ-RL?

Both devices are offered in an 8-lead SOIC package. The AD8421BRZ is supplied in tube or tray format, while the AD8428ARZ-RL is supplied on a 13-inch reel with 2500 units per reel (RL suffix). The package footprint and pinout are identical, but the gain configuration and electrical specifications differ.

Which device is better suited for high-side current sensing?

The AD8428ARZ-RL is better suited for high-side current sensing because its fixed gain of 2000 amplifies the small shunt voltage to a usable level while maintaining low input noise (1.5 nV/√Hz). The AD8421BRZ, with a fixed gain of 10, would require a larger shunt resistor or additional gain stage, which may increase power dissipation and complexity.

What are the quiescent supply current specifications for the AD8421BRZ and AD8428ARZ-RL?

The AD8421BRZ draws a typical quiescent supply current of 2.3 mA. The AD8428ARZ-RL draws a typical quiescent supply current of 6.5 mA. The AD8421BRZ is more power-efficient, making it preferable for battery-powered or low-power instrumentation.