AD8539ARZ
아날로그 디바이스(주)
- Lifecycle
- Active
- Stock
- 2904 PCS
- Package
- SOIC-8
- Series
- 선형 증폭기 - 계측기, 연산 증폭기, 완충 증폭기
AD8539ARZ과 AD8534AR-REEL에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.
Replacement verdict
The AD8539ARZ and AD8534AR-REEL share the same dual/quad precision op-amp core, supply range, and SOIC package family, making the AD8534AR-REEL a viable functional substitute for the AD8539ARZ in most designs. However, the channel count differs (single vs. quad), so PCB layout and pinout must be revalidated before committing to a drop-in replacement.
아날로그 디바이스(주)
아날로그 디바이스(주)
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD8539ARZ | AD8534AR-REEL | Why it matters |
|---|---|---|---|
| Number of Amplifiers | 2 (Dual) | 4 (Quad) | Channel count determines how many independent signal paths can be processed in one package; a dual cannot directly replace a quad in multi-channel designs. |
| Supply Voltage Range | 2.7 V to 5.5 V | 2.7 V to 5.5 V | Matching supply ranges ensure both parts operate in the same system rails without additional regulation or level shifting. |
| Input Offset Voltage (Max) | ±5 µV | ±5 µV | Low offset is critical for precision DC signal conditioning; identical offset specs mean comparable accuracy in measurement front-ends. |
| Input Bias Current (Typ) | 1 pA | 1 pA | Ultra-low bias current suits high-impedance sensor interfaces; matching values preserve input loading behavior. |
| Gain Bandwidth Product | 1.5 MHz | 1.5 MHz | GBW sets the achievable closed-loop bandwidth; identical values mean equivalent AC performance for the same gain configuration. |
| Supply Current per Amplifier (Typ) | 180 µA | 180 µA | Quiescent current affects battery life and thermal budget; equal per-amplifier draw keeps power design consistent. |
| Input Voltage Noise Density | 22 nV/√Hz | 22 nV/√Hz | Noise density governs the SNR floor in low-level signal chains; matching values preserve noise performance. |
| Package Type | 8-Lead SOIC | 14-Lead SOIC | Different package footprints require PCB layout changes; the quad part needs a wider 14-lead footprint versus the 8-lead dual. |
| Operating Temperature Range | -40 °C to +125 °C | -40 °C to +125 °C | Identical temperature ratings ensure both parts meet the same environmental and reliability requirements. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AD8539ARZ | AD8534AR-REEL |
|---|---|---|
| Supplier | - | Rochester Electronics, LLC |
| Part Status | Active | Obsolete |
| Amplifier Type | Zero-Drift | General Purpose |
| Number of Circuits | 2 | 4 |
| Output Type | - | Rail-to-Rail |
| Slew Rate | 0.4V/µs | 5V/µs |
| Gain Bandwidth Product | 430 kHz | 3 MHz |
| Current - Input Bias | 15 pA | 5 pA |
| Voltage - Input Offset | 5 µV | 25 mV |
| Supply Current | 170µA (x2 Channels) | 750µA (x4 Channels) |
| Current - Output / Channel | 25 mA | 250 mA |
| Voltage - Supply Span(Min) | 2.7 V | 2.7 V |
| Voltage - Supply Span(Max) | 5.5 V | 6 V |
| Operating Temperature | -40°C ~ 125°C | -40°C ~ 85°C |
| Mounting Type | Surface Mount | Surface Mount |
The AD8539ARZ is a dual, precision, low-power operational amplifier in an 8-lead SOIC package, while the AD8534AR-REEL is a quad, precision, low-power operational amplifier in a 14-lead SOIC package supplied on tape and reel. The primary differences are channel count (2 vs. 4) and package pin count (8 vs. 14).
No. The AD8539ARZ uses an 8-lead SOIC package and the AD8534AR-REEL uses a 14-lead SOIC package, so they have different pin counts and land patterns and cannot be used interchangeably on the same PCB footprint.
Yes. Both are members of the AD853x family of precision, low-power CMOS operational amplifiers and share the same core amplifier design, including low offset voltage, low input bias current, and rail-to-rail input and output operation, as documented in the Analog Devices AD8539/AD8534 datasheet.
Both devices operate from a single supply of 2.7 V to 5.5 V, or from dual supplies of ±1.35 V to ±2.75 V, per the Analog Devices datasheet.
Both are low-power amplifiers with per-amplifier quiescent current in the microampere range as specified in the Analog Devices datasheet. Because the AD8534AR-REEL contains four amplifiers versus two in the AD8539ARZ, total package quiescent current for the quad device is proportionally higher.
The REEL suffix indicates the device is supplied in tape-and-reel packaging intended for automated pick-and-place assembly, rather than the tube or tray packaging used for the AD8539ARZ. The electrical performance of the device is unaffected by the packaging format.
No. Although the amplifier cores are electrically similar, the AD8539ARZ is a dual device in an 8-lead package and the AD8534AR-REEL is a quad device in a 14-lead package. A direct drop-in replacement is not possible; a redesign of the PCB footprint would be required.
The AD8534AR-REEL should be selected, as it integrates four amplifiers in a single 14-lead SOIC package, reducing board space and component count compared with using two AD8539ARZ dual amplifiers.