AD9220ARSZ vs AD9223ARS

AD9220ARSZ과 AD9223ARS에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The AD9223ARS is a viable functional replacement candidate for the AD9220ARSZ in many 12-bit ADC applications, sharing the same resolution, analog input architecture, and package footprint. However, designers must validate the lower maximum sampling rate and the reduced analog input bandwidth against their specific signal chain requirements before committing to a drop-in substitution.

Resolution High match
Maximum Sampling Rate Validation required
Package Type High match
Analog Input Bandwidth Validation required

Parts at a glance

Part A

AD9220ARSZ

아날로그 디바이스(주)

Lifecycle
Active
Stock
2918 PCS
Package
SSOP-28
Series
데이터 수집 - 아날로그 변환기(ADC)
Part B

AD9223ARS

아날로그 디바이스(주)

Lifecycle
Active
Stock
426 PCS
Package
SSOP-28
Series
데이터 수집 - 아날로그 변환기(ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AD9220ARSZ AD9223ARS Why it matters
Resolution 12 bits 12 bits Both converters provide 12-bit resolution, so quantization accuracy is equivalent for signal-chain design.
Sampling Rate 10 MSPS 3 MSPS The maximum conversion rate determines the input bandwidth and Nyquist limit; the AD9220 supports much higher-speed signals than the AD9223.
Input Type Differential (single-ended capable) Differential (single-ended capable) Differential inputs improve noise immunity and allow flexible front-end configurations for both parts.
Supply Voltage 5 V (single supply) 5 V (single supply) Both operate from a single 5 V rail, simplifying power-supply design and allowing drop-in compatibility.
Power Consumption ~310 mW typical ~100 mW typical Lower power dissipation in the AD9223 benefits thermally constrained or battery-powered systems.
SNR ~70 dB ~70 dB Similar signal-to-noise ratio means comparable dynamic range for both converters in the same application.
Package 28-lead SSOP 28-lead SSOP Identical package and pinout enable direct board-level substitution without layout changes.
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C Matching industrial temperature ranges ensure both parts suit the same environmental conditions.
Output Interface Parallel CMOS Parallel CMOS A common parallel CMOS output interface allows either part to connect to the same digital backend logic.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AD9220ARSZ AD9223ARS
Supplier - Rochester Electronics, LLC
Part Status Active Obsolete
Number of Bits 12 12
Sampling Rate(Per Second) 10M 3M
Data Interface Parallel Parallel
Number of A/D Converters 1 7
Operating Temperature -40°C ~ 85°C -40°C ~ 85°C
Number of Inputs 1 -
Input Type Differential, Single Ended -
Configuration S/H-ADC -
Ratio - S / H: ADC 1:1 -
Architecture Pipelined -
Reference Type External, Internal -
Voltage - Supply, Analog 5V -
Voltage - Supply, Digital 2.7V ~ 5.25V -

Frequently asked questions

What are the key differences between the AD9220ARSZ and the AD9223ARS?

The AD9220ARSZ is a 12-bit, 10 MSPS analog-to-digital converter, while the AD9223ARS is a 12-bit, 3 MSPS ADC. Both are monolithic sampling ADCs from Analog Devices in a 28-lead SSOP package, but they differ in maximum sampling rate, power consumption, and dynamic performance specifications.

Are the AD9220ARSZ and AD9223ARS pin-compatible?

Yes. Both devices are offered in the same 28-lead SSOP (RS) package and share the same pinout, which allows the AD9223ARS to be used as a lower-speed drop-in alternative to the AD9220ARSZ in existing layouts, provided the system timing and performance requirements are revalidated.

What is the maximum sampling rate of each device?

The AD9220ARSZ supports a maximum sampling rate of 10 MSPS, whereas the AD9223ARS supports a maximum sampling rate of 3 MSPS. Designs requiring sample rates above 3 MSPS must use the AD9220ARSZ.

How do the power consumption figures compare?

The AD9220ARSZ typically dissipates about 250 mW at 10 MSPS, while the AD9223ARS typically dissipates about 100 mW at 3 MSPS. The lower power of the AD9223ARS makes it preferable for power-sensitive designs that do not need the higher throughput.

Do both converters offer the same analog input and reference architecture?

Yes. Both the AD9220ARSZ and AD9223ARS use a pipelined switched-capacitor architecture with a differential analog input and an on-chip reference, and both provide a 12-bit parallel CMOS-compatible output. The internal reference can be overdriven by an external reference on both parts.

Can the AD9223ARS be substituted for the AD9220ARSZ in an existing design?

Substitution is possible only if the system's maximum sample rate is 3 MSPS or lower and the dynamic performance (SNR, SFDR) of the AD9223ARS meets the application requirements. Because the AD9223ARS has lower throughput and different AC specifications, the design must be revalidated against the AD9223ARS datasheet before replacement.

What are the typical applications for each device?

The AD9220ARSZ is suited to higher-speed signal chains such as medical imaging, CCD/camera digitization, and communications receivers requiring up to 10 MSPS. The AD9223ARS targets lower-power, lower-speed applications such as portable instrumentation, data acquisition, and battery-powered systems operating at up to 3 MSPS.