AD9280ARSZRL
아날로그 디바이스(주)
- Lifecycle
- Active
- Stock
- 4547 PCS
- Series
- 데이터 수집 - 아날로그 변환기(ADC)
AD9280ARSZRL과 AD9283BRSZ-RL100에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.
Replacement verdict
The AD9283BRSZ-RL100 is a viable functional replacement candidate for the AD9280ARSZRL in many 8-bit ADC applications, sharing the same resolution, supply voltage, and SSOP-28 footprint. However, designers must validate the lower 100 MSPS sampling rate, reduced analog input bandwidth, and differing power consumption against the original 32 MSPS design requirements before committing to a drop-in substitution.
아날로그 디바이스(주)
아날로그 디바이스(주)
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD9280ARSZRL | AD9283BRSZ-RL100 | Why it matters |
|---|---|---|---|
| Resolution | 8 bits | 8 bits | Both are 8-bit ADCs, so quantization resolution is equivalent for substitutability. |
| Sampling Rate | 32 MSPS | 100 MSPS | The AD9283 supports a much higher maximum sample rate, enabling wider input bandwidth and faster signal capture. |
| Supply Voltage | 2.7 V to 5.5 V | 2.7 V to 3.6 V | The AD9280 tolerates a wider supply range including 5 V, while the AD9283 is limited to 3.3 V-class supplies. |
| Input Type | Single-ended | Differential | Differential inputs improve noise immunity and dynamic performance, but require different front-end drive circuitry. |
| Package / Pin Count | 28-lead SSOP | 20-lead SSOP | Different package sizes and pinouts mean the parts are not drop-in footprint compatible. |
| Power Consumption | ~100 mW (typical at 3 V) | ~90 mW (typical at 3 V) | Similar power draw, but the AD9283 delivers higher speed at comparable consumption. |
| SNR | ~48 dB (at Nyquist) | ~46.5 dB (at Nyquist) | Signal-to-noise ratio affects effective dynamic range; the AD9280 offers slightly better SNR. |
| Output Interface | Parallel CMOS | Parallel CMOS | Both provide parallel CMOS outputs, simplifying digital interface compatibility. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AD9280ARSZRL | AD9283BRSZ-RL100 |
|---|---|---|
| Part Status | Active | Active |
| Number of Bits | 8 | 8 |
| Sampling Rate(Per Second) | - | 100M |
| Number of Inputs | 1 | 1 |
| Input Type | Differential, Single Ended | Differential, Single Ended |
| Data Interface | Parallel | Parallel |
| Configuration | S/H-ADC | S/H-ADC |
| Ratio - S / H: ADC | 1:1 | 1:1 |
| Number of A/D Converters | - | 1 |
| Architecture | Pipelined | Pipelined |
| Reference Type | External | Internal |
| Voltage - Supply, Analog | 2.7V ~ 5.5V | 2.7V ~ 3.6V |
| Voltage - Supply, Digital | 2.7V ~ 5.5V | 2.7V ~ 3.6V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
| Base Product Number | AD9280 | - |
| Sampling Rate (Per Second) | 32M | - |
| Number of A / D Converters | 1 | - |
| Mounting Type | Surface Mount | - |
| Packaging | Cut Tape (CT), Tape & Reel (TR) | - |
The AD9280ARSZRL is an 8-bit, 32 MSPS analog-to-digital converter, while the AD9283BRSZ-RL100 is an 8-bit, 100 MSPS ADC. The AD9283 offers a higher maximum sampling rate (100 MSPS vs 32 MSPS), making it suitable for higher-bandwidth signal acquisition. Both are 8-bit resolution converters but differ in speed grade, package, and power consumption characteristics.
The AD9280ARSZRL is supplied in a 28-lead SSOP (Shrink Small Outline Package), whereas the AD9283BRSZ-RL100 is supplied in a 20-lead SSOP. The different pin counts and package footprints mean the two devices are not pin-compatible and cannot be dropped into the same PCB land pattern without redesign.
The AD9280ARSZRL has a maximum conversion rate of 32 MSPS. The AD9283BRSZ-RL100 has a maximum conversion rate of 100 MSPS. The higher sampling rate of the AD9283 supports wider input signal bandwidths and is better suited for undersampling and high-frequency applications.
The AD9280ARSZRL typically dissipates about 95 mW at 32 MSPS from a single 3 V supply. The AD9283BRSZ-RL100 typically dissipates about 90 mW at 100 MSPS from a 3 V supply. Despite the higher sampling rate, the AD9283 achieves comparable or lower power dissipation due to its architecture.
The AD9280ARSZRL offers a flexible input range of 1 V p-p to 2 V p-p, configurable via the reference and input span settings. The AD9283BRSZ-RL100 has a fixed 1 V p-p differential input range. Designs requiring a wider or adjustable input span should account for this difference.
No. The two devices differ in package (20-lead vs 28-lead SSOP), pinout, maximum sampling rate (100 MSPS vs 32 MSPS), and analog input range (1 V p-p fixed vs 1–2 V p-p adjustable). A direct drop-in substitution is not possible; any replacement requires PCB redesign and validation against the target system requirements.
The AD9280ARSZRL (32 MSPS) is typically used in imaging, video digitization, and general-purpose data acquisition where moderate speed and flexible input range are needed. The AD9283BRSZ-RL100 (100 MSPS) is suited for higher-speed applications such as digital oscilloscopes, IF sampling, and high-speed data acquisition systems requiring wider signal bandwidth.
Both the AD9280ARSZRL and AD9283BRSZ-RL100 operate from a single 3 V supply (2.7 V to 3.6 V) and are specified over the industrial temperature range of −40°C to +85°C. These common operating conditions allow both parts to be used in similar industrial environments, subject to the speed and package differences noted.