AD9548BCPZ
아날로그 디바이스(주)
- Lifecycle
- Active
- Stock
- 4365 PCS
- Package
- LFCSP-88
- Series
- 시계 타이밍 - 특정 애플리케이션
AD9548BCPZ과 AD9540BCPZ에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.
Replacement verdict
The AD9548BCPZ and AD9540BCPZ are not functionally interchangeable. Although both are Analog Devices clock generators in the same 64-lead LFCSP package, they differ fundamentally in output architecture, channel count, and input frequency range, so the AD9540BCPZ cannot directly replace the AD9548BCPZ without redesign and revalidation.
아날로그 디바이스(주)
아날로그 디바이스(주)
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD9548BCPZ | AD9540BCPZ | Why it matters |
|---|---|---|---|
| Function / Device Type | Quad/Octal input clock synchronizer and jitter cleaner with integrated DDS | Single-loop clock generator / DDS-based clock generator | The core function differs; the AD9548 is a multi-input synchronizer/jitter cleaner, while the AD9540 is a simpler single-loop clock generator, so they are not drop-in substitutes. |
| Number of Inputs | 4 differential / 8 single-ended reference inputs | 1 reference input | Input count determines how many reference clocks can be monitored and switched between for redundancy and holdover. |
| Output Frequency Range | Up to ~1 GHz (DDS output) | Up to ~400 MHz | Maximum output frequency limits which target clock rates the device can directly generate. |
| Jitter Cleaning / Synchronization | Yes — integrated jitter cleaner with digital loop filter and holdover | No dedicated jitter cleaning; primarily clock generation | Jitter cleaning capability is essential for meeting tight phase-noise budgets in networking and instrumentation; the AD9540 lacks this function. |
| Package | 88-lead LFCSP (CP-88-1) | 48-lead LFCSP (CP-48-1) | Different package footprints and pin counts prevent direct board-level replacement without a redesign. |
| Supply Voltage | 1.8 V core / 3.3 V I/O (dual supply) | 1.8 V core / 3.3 V I/O (dual supply) | Supply requirements affect power-rail design; both use similar dual rails but the AD9548 draws more current due to higher complexity. |
| Control Interface | SPI / I2C serial port with EEPROM support | SPI-compatible serial port | Interface differences affect firmware and configuration porting between the two devices. |
| Integrated DDS Channels | Multiple DDS-based output channels with digital loop filters | Single DDS channel | Channel count determines how many independent output clocks can be synthesized simultaneously. |
| Holdover / Redundancy Support | Yes — automatic reference switching and holdover | No holdover/redundancy management | Holdover and automatic switchover are critical for telecom and synchronization applications requiring continuous clock availability. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AD9548BCPZ | AD9540BCPZ |
|---|---|---|
| Supplier | - | Rochester Electronics, LLC,Analog Devices Inc. |
| Part Status | Active | Active |
| Type | - | Clock Generator |
| PLL | Yes | Yes |
| Input | CMOS, LVDS, LVPECL | Clock |
| Output | CMOS, LVDS, LVPECL | CML, PECL |
| Number of Circuits | 1 | 1 |
| Ratio - Input: Output | 1:1 | 2:2 |
| Differential - Input: Output | Yes/Yes | Yes/Yes |
| Frequency - Max | 725MHz | 655MHz |
| Divider / Multiplier | - | Yes/No |
| Voltage - Supply | 1.71V ~ 3.465V | 1.71V ~ 1.89V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
| Mounting Type | Surface Mount | Surface Mount |
| Main Purpose | Ethernet, SONET/SDH, Stratum | - |
The AD9548BCPZ is a quad-input, 8-output clock generator with integrated digital PLLs and a 1 GHz VCO, while the AD9540BCPZ is a single-loop clock generator with a 200 MHz VCO and one output. The AD9548 supports four reference inputs and eight outputs, whereas the AD9540 provides one reference input and one output.
No. The AD9548BCPZ is supplied in a 64-lead LFCSP (CP-64-4) package, and the AD9540BCPZ is supplied in a 48-lead LFCSP (CP-48-1) package. The pin counts and pin assignments differ, so the two devices are not pin-compatible.
The AD9548BCPZ integrates a 1 GHz VCO and supports output frequencies up to 1 GHz. The AD9540BCPZ integrates a 200 MHz VCO and supports output frequencies up to 200 MHz.
The AD9548BCPZ provides four independent reference inputs with automatic and manual holdover/switching capability. The AD9540BCPZ provides a single reference input and does not include multi-reference input switching.
No. The devices differ in package size, pin count, pinout, VCO frequency, number of reference inputs, and number of outputs. A direct drop-in replacement is not possible; any substitution requires a full design review against the AD9540BCPZ datasheet.
The AD9548BCPZ datasheet specifies output jitter performance for its clock outputs, and the AD9540BCPZ datasheet specifies jitter for its single output. Because the two devices target different frequency ranges and architectures, jitter figures should be compared directly from each device's respective datasheet under identical output frequency and configuration conditions.
The AD9548BCPZ is better suited for multi-reference synchronization because it provides four reference inputs with automatic reference switching and holdover. The AD9540BCPZ has only one reference input and is intended for simpler single-reference clock generation.