AD977ABRZ vs AD977CRRL

AD977ABRZ과 AD977CRRL에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The AD977CRRL is a functionally compatible replacement candidate for the AD977ABRZ, sharing the same 16-bit current-output DAC architecture, 100 kSPS throughput, and 20-pin SOIC footprint. The CRRL grade offers tighter INL and DNL specifications and a wider specified temperature range, so it can serve as a drop-in substitute in most designs, though the tighter linearity grade and grade-specific timing should be validated against the target application's accuracy and thermal requirements.

Resolution and Architecture High match
Package and Pinout High match
Linearity Grade Validation required
Operating Temperature Range Validation required

Parts at a glance

Part A

AD977ABRZ

아날로그 디바이스(주)

Lifecycle
Active
Stock
4556 PCS
Package
SOIC-20
Series
데이터 수집 - 아날로그 변환기(ADC)
Part B

AD977CRRL

아날로그 디바이스(주)

Lifecycle
Active
Stock
9495 PCS
Package
SOIC-20
Series
데이터 수집 - 아날로그 변환기(ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AD977ABRZ AD977CRRL Why it matters
Resolution 16 bit 16 bit Bit depth determines the quantization granularity and achievable dynamic range of the ADC; both parts match here.
Sampling Rate 100 kSPS 200 kSPS Maximum throughput limits the bandwidth of signals that can be digitized; the C-grade doubles the sample rate of the A-grade.
Number of Input Channels 1 1 Single-channel architecture defines how many analog signals can be converted simultaneously; both are single-channel.
Input Type Single-ended Single-ended Input configuration affects signal conditioning and drive circuitry requirements; both accept single-ended inputs.
Interface Parallel (SPI/QSPI/MICROWIRE compatible) Parallel (SPI/QSPI/MICROWIRE compatible) Digital interface compatibility determines whether the part can drop into an existing host processor bus; both share the same serial/parallel interface.
Supply Voltage 5 V (analog and digital) 5 V (analog and digital) Supply rail requirements must match the board power design; both operate from a single 5 V supply.
Package / Mounting 28-SOIC (surface mount) 28-SOIC (surface mount) Footprint and mounting style must match for physical substitutability; both use the same 28-lead SOIC package.
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C Temperature range defines the environments in which the part is guaranteed to meet specifications; both are industrial-grade.
INL (Integral Nonlinearity) ±2.0 LSB max ±1.0 LSB max INL quantifies linearity error and directly affects measurement accuracy; the C-grade offers tighter linearity than the A-grade.
Power Consumption 100 mW typ 100 mW typ Power draw impacts thermal budget and supply sizing; both grades consume the same typical power.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AD977ABRZ AD977CRRL
Supplier - Analog Devices Inc.,Rochester Electronics, LLC
Part Status Active Obsolete
Number of Bits 16 16
Sampling Rate(Per Second) 200k 100k
Number of Inputs 1 1
Input Type Single Ended Single Ended
Data Interface SPI SPI
Configuration ADC ADC
Number of A/D Converters 1 1
Architecture SAR SAR
Reference Type External, Internal External, Internal
Voltage - Supply, Analog 5V 5V
Voltage - Supply, Digital 5V 5V
Operating Temperature -40°C ~ 85°C -40°C ~ 85°C

Frequently asked questions

What are the key differences between the AD977ABRZ and AD977CRRL?

The AD977ABRZ is a 16-bit, 100 kSPS ADC in a 28-lead SOIC package with a specified INL of ±2 LSB max, while the AD977CRRL is a faster 16-bit, 200 kSPS ADC in a 28-lead SSOP package with a specified INL of ±1 LSB max. The CRRL grade offers tighter linearity and higher throughput, whereas the ABRZ grade is a lower-cost, lower-speed option.

Are the AD977ABRZ and AD977CRRL pin-compatible?

No. The AD977ABRZ uses a 28-lead SOIC (R-28) package, and the AD977CRRL uses a 28-lead SSOP (RS-28) package. Although both are 28-lead devices with the same pin functions, the package body dimensions and lead pitch differ, so they are not drop-in replacements on the same PCB footprint.

Can the AD977ABRZ be used as a substitute for the AD977CRRL in an existing design?

Only with caution. The AD977ABRZ has a lower maximum throughput (100 kSPS vs 200 kSPS) and wider INL (±2 LSB vs ±1 LSB), so it cannot meet applications requiring the CRRL's speed or linearity. Additionally, the package difference (SOIC vs SSOP) requires a PCB layout change. Substitution is valid only if the design tolerates the reduced speed and linearity and the board is redesigned for the SOIC footprint.

What are the resolution and throughput specifications of these two ADCs?

Both devices are 16-bit successive-approximation ADCs. The AD977ABRZ is specified for a maximum throughput of 100 kSPS, while the AD977CRRL is specified for 200 kSPS. Resolution is identical at 16 bits for both grades.

How do the linearity specifications compare between the AD977ABRZ and AD977CRRL?

The AD977ABRZ (A grade) specifies a maximum integral nonlinearity (INL) of ±2 LSB. The AD977CRRL (C grade) specifies a maximum INL of ±1 LSB. Both grades guarantee 16-bit no-missing-code performance, but the C grade provides tighter absolute accuracy.

Do both parts support the same analog input range and reference configuration?

Yes. Both the AD977ABRZ and AD977CRRL are members of the AD977 family and share the same analog input structure, supporting bipolar input ranges of ±10 V, ±5 V, ±2.5 V, and unipolar ranges of 0 V to 10 V, 0 V to 5 V, and 0 V to 2.5 V, configured via external reference and range pins. The internal reference and external reference options are common to both grades.

What are the operating temperature ranges for the AD977ABRZ and AD977CRRL?

Both the AD977ABRZ and AD977CRRL are specified over the industrial temperature range of −40°C to +85°C. The package difference (SOIC vs SSOP) does not change the specified operating temperature range.

Which part should be selected for a new design requiring 200 kSPS throughput?

The AD977CRRL should be selected, as it is the grade specified for 200 kSPS maximum throughput with ±1 LSB INL. The AD977ABRZ is limited to 100 kSPS and ±2 LSB INL and would not meet a 200 kSPS requirement. Note that the CRRL's SSOP package footprint must be accommodated in the PCB layout.