AD9788BSVZ vs AD9786BSV

AD9788BSVZ과 AD9786BSV에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The AD9788BSVZ and AD9786BSV are both dual-channel 16-bit high-speed DACs from Analog Devices in the same 100-lead TQFP-EP package, sharing a compatible supply and temperature range, so the AD9788BSVZ can serve as a functional replacement candidate for the AD9786BSV. However, the two parts differ in maximum update rate, on-chip digital signal processing features, and interface configuration, so the replacement must be validated against the target application's sample-rate, interpolation, and digital datapath requirements before adoption.

Resolution and Channel Count High match
Package Type High match
Maximum Update Rate Validation required
On-Chip Digital Signal Processing Validation required

Parts at a glance

Part A

AD9788BSVZ

아날로그 디바이스(주)

Lifecycle
Active
Stock
5494 PCS
Package
TQFP-100
Series
데이터 수집 - 다이 모드 변환기(DAC)
Part B

AD9786BSV

아날로그 디바이스(주)

Lifecycle
Active
Stock
493 PCS
Package
TQFP-80
Series
데이터 수집 - 다이 모드 변환기(DAC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AD9788BSVZ AD9786BSV Why it matters
Resolution (DAC bits) 16 16 Both are 16-bit DACs, so quantization noise floor and dynamic range are comparable for signal synthesis.
Maximum Update Rate 800 MSPS 500 MSPS Higher update rate allows wider signal bandwidth and higher intermediate frequencies in the transmit path.
Number of DAC Channels 2 (dual) 1 (single) Dual channels enable I/Q transmit architectures, while a single channel suits simpler single-path designs.
On-chip Digital Up-Converter / NCO Yes (dual interpolating with NCO) No An integrated up-converter and NCO simplify frequency translation and reduce external DSP/FPGA processing load.
Interpolation 2x / 4x / 8x 2x / 4x / 8x Interpolation filters relax analog reconstruction filter requirements and improve spectral performance.
Digital Interface LVDS (dual-port) CMOS / LVDS Interface type affects FPGA/ASIC I/O compatibility, pin count, and achievable data throughput.
Supply Voltage 1.8 V / 3.3 V 1.8 V / 3.3 V Matching supply rails allow reuse of the same power design and simplify board-level integration.
Package 100-lead TQFP (TQFP-100) 80-lead TQFP (TQFP-80) Different package footprints and pin counts prevent direct drop-in replacement on an existing PCB.
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C Identical industrial temperature ratings mean both suit the same environmental conditions.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AD9788BSVZ AD9786BSV
Supplier - Rochester Electronics, LLC
Series TxDAC+® TxDAC+®
Part Status Active Obsolete
Number of Bits 16 -
Number of D/A Converters 2 -
Settling Time 20ns (Typ) -
Output Type Current - Unbuffered -
Differential Output Yes -
Data Interface Parallel -
Reference Type Internal -
Voltage - Supply, Analog 3.13V ~ 3.47V -
Voltage - Supply, Digital 1.7V ~ 1.9V, 3.13V ~ 3.47V -
INL / DNL(LSB) ±3.7, ±2.1 -
Architecture Oversampling Interpolating DAC -
Operating Temperature -40°C ~ 85°C -

Frequently asked questions

What are the key differences between the AD9788BSVZ and the AD9786BSV?

The AD9788BSVZ is a dual 16-bit, 800 MSPS TxDAC+ digital-to-analog converter with a 32-bit digital datapath, while the AD9786BSV is a single 16-bit, 500 MSPS TxDAC+ DAC. The AD9788 offers two DAC channels and a higher maximum update rate, whereas the AD9786 provides one channel at a lower maximum rate. Both are housed in 100-lead TQFP packages but differ in channel count and speed grade.

Are the AD9788BSVZ and AD9786BSV pin-compatible?

No. Although both devices are offered in 100-lead TQFP (SV) packages, the AD9788BSVZ is a dual-channel DAC with a different pin function assignment than the single-channel AD9786BSV. Pin functions and the digital interface configuration differ, so they are not drop-in replacements and the PCB layout must be validated against each device's datasheet.

What is the maximum DAC update rate of each device?

The AD9788BSVZ supports a maximum DAC update rate of 800 MSPS. The AD9786BSV supports a maximum DAC update rate of 500 MSPS. Designs requiring the higher sample rate must use the AD9788BSVZ.

How many DAC channels does each part provide?

The AD9788BSVZ integrates two 16-bit DAC channels, making it suitable for I/Q or dual-channel transmit architectures. The AD9786BSV integrates a single 16-bit DAC channel. Channel count is a primary selection criterion between the two parts.

Do both devices include an on-chip digital datapath?

Yes. Both the AD9788BSVZ and AD9786BSV are TxDAC+ devices that include an on-chip digital datapath with interpolation filters and digital signal processing features. The AD9788BSVZ provides a 32-bit digital datapath, while the AD9786BSV provides its own integrated interpolation and modulation signal processing. Exact datapath feature sets should be confirmed in each respective datasheet.

What is the resolution of the AD9788BSVZ and AD9786BSV?

Both the AD9788BSVZ and the AD9786BSV are 16-bit resolution DACs. Resolution is identical between the two parts; the selection difference lies in channel count, maximum update rate, and datapath configuration.

Can the AD9786BSV be used as a direct substitute for the AD9788BSVZ in an existing design?

No. Because the AD9788BSVZ is a dual-channel 800 MSPS device and the AD9786BSV is a single-channel 500 MSPS device with a different pin assignment, a direct substitution is not possible. Any replacement requires revalidation of channel count, sample rate, pin functions, and PCB land pattern against the manufacturer datasheet.