AD9957BSVZ
아날로그 디바이스(주)
- Lifecycle
- Active
- Stock
- 4659 PCS
- Package
- TQFP-100
- Series
- 인터페이스 - 직접 디지털 합성(DDS)
AD9957BSVZ과 AD9952YSVZ에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.
Replacement verdict
The AD9952YSVZ and AD9957BSVZ are not drop-in replacements for one another. Although both are single-channel DDS devices in a 48-lead TQFP package, they differ fundamentally in integrated DAC resolution, maximum system clock, and on-chip functionality, so the AD9957BSVZ cannot be substituted for the AD9952YSVZ without a full design review and validation.
아날로그 디바이스(주)
아날로그 디바이스(주)
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD9952YSVZ | AD9957BSVZ | Why it matters |
|---|---|---|---|
| Primary Function | Direct Digital Synthesizer (DDS) with 14-bit DAC | Quadrature Digital Upconverter (QDUC) with 14-bit DAC | Defines the core signal-processing role; a DDS generates a single tone, while a QDUC performs interpolation and quadrature upconversion, so they are not functionally interchangeable. |
| Maximum DAC Update Rate / System Clock | 400 MSPS | 1 GSPS | Higher clock rates enable wider output bandwidth and higher-frequency synthesis; the QDUC supports much higher throughput than the DDS. |
| DAC Resolution | 14 bits | 14 bits | DAC bit depth sets the achievable spurious-free dynamic range and output signal quality; both parts share the same resolution. |
| On-Chip PLL / Clock Multiplier | Yes (4x to 20x REFCLK multiplier) | Yes (integrated PLL with programmable multiplier) | An on-chip PLL allows a low-frequency reference to generate the high internal clock, simplifying board-level clocking; both provide this but with different ranges. |
| Input Data Interface | Serial SPI-compatible control port; frequency/phase/amplitude tuning words | Parallel 18-bit I/Q input port plus serial control port | The interface determines how the host feeds modulation data; the QDUC accepts high-speed parallel I/Q samples, whereas the DDS is programmed via serial tuning words. |
| Modulation / Upconversion Capability | Frequency, phase, and amplitude modulation of a single carrier | Quadrature upconversion with interpolation filters and I/Q modulation | Determines suitability for complex modulated waveforms; the QDUC supports I/Q upconversion for communications transmitters, which the DDS cannot do directly. |
| Package | 48-lead TQFP (SVZ suffix) | 100-lead TQFP (SVZ suffix) | Package footprint and pin count affect PCB layout and cannot be swapped without a board redesign. |
| Supply Voltage | 1.8 V core / 3.3 V I/O | 1.8 V core / 3.3 V I/O | Supply requirements determine power-rail design and level compatibility; both parts share the same dual-rail scheme. |
| Typical Application | Agile local oscillators, clock generation, radar and instrumentation | Cellular base-station transmitters, broadband wireless, cable modem upstream | Application fit indicates substitutability; the DDS targets tone/clock synthesis while the QDUC targets I/Q transmit signal chains. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AD9957BSVZ | AD9952YSVZ |
|---|---|---|
| Part Status | Active | Active |
| Resolution(Bits) | 14 b | 14 b |
| Masterfclk | 1 GHz | 400 MHz |
| Tuning Word Width(Bits) | 32 b | 32 b |
| Voltage - Supply | 1.8V, 3.3V | 1.71V ~ 1.96V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 105°C |
| Mounting Type | Surface Mount | Surface Mount |
The AD9952YSVZ is a single-channel, 14-bit, 400 MSPS direct digital synthesizer (DDS) with an integrated 14-bit DAC. The AD9957BSVZ is a 14-bit, 1 GSPS quadrature digital upconverter that integrates a DDS, a 14-bit DAC, and digital interpolation filters, and is intended for baseband-to-IF/RF upconversion in communications systems. The AD9957 includes additional signal-processing blocks (interpolation filters, quadrature modulation) not present in the AD9952.
No. Both devices are offered in a 100-lead TQFP_EP (SV) package, but their pin functions and internal architectures differ substantially. The AD9957 provides additional I/O and control pins for its interpolation and quadrature upconversion functions. A direct PCB drop-in replacement is not supported; the land pattern and pin assignments must be verified against the respective datasheets.
The AD9952YSVZ supports a maximum DAC update rate of 400 MSPS. The AD9957BSVZ supports a maximum DAC update rate of 1 GSPS. These rates are specified in the respective manufacturer datasheets and determine the maximum achievable output frequency and signal bandwidth for each part.
The AD9957BSVZ is designed specifically for quadrature digital upconversion. It integrates digital interpolation filters and a quadrature modulator that accepts I and Q baseband inputs and upconverts them to an intermediate frequency. The AD9952YSVZ is a single-channel DDS and does not include integrated quadrature upconversion signal processing, so it is not a direct substitute for that function.
Yes. Both the AD9952YSVZ and the AD9957BSVZ integrate a 14-bit digital-to-analog converter. The DAC resolution is the same, but the maximum update rate and the digital signal-processing preceding the DAC differ between the two devices.
No. Because the AD9957BSVZ includes quadrature upconversion, interpolation filters, and additional control interfaces that the AD9952YSVZ does not provide, the two devices are not functionally interchangeable. Any substitution requires a full review of the signal chain, pin assignments, register map, and PCB layout against the manufacturer datasheets.
Both the AD9952YSVZ and the AD9957BSVZ operate from a 1.8 V digital core supply and a 3.3 V supply for the DAC and I/O, as specified in their respective datasheets. Designers should confirm the exact supply rail tolerances and sequencing requirements in the official manufacturer documentation before finalizing the power design.