ADA4004-4ARZ vs ADA4062-2ARZ

ADA4004-4ARZ과 ADA4062-2ARZ에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The ADA4062-2ARZ and ADA4004-4ARZ are not functionally interchangeable: they differ in channel count, package footprint, supply voltage range, and quiescent current, so the ADA4004-4ARZ cannot directly replace the ADA4062-2ARZ without circuit and layout redesign.

Different channel count Different package footprint Different supply voltage range Different quiescent current

Parts at a glance

Part A

ADA4004-4ARZ

아날로그 디바이스(주)

Lifecycle
Active
Stock
4895 PCS
Package
SOIC-14
Series
선형 증폭기 - 계측기, 연산 증폭기, 완충 증폭기
Part B

ADA4062-2ARZ

아날로그 디바이스(주)

Lifecycle
Active
Stock
6529 PCS
Package
SOIC-8
Series
선형 증폭기 - 계측기, 연산 증폭기, 완충 증폭기

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADA4062-2ARZ ADA4004-4ARZ Why it matters
Number of Amplifiers 2 4 Determines how many independent amplifier channels are available in a single package, directly affecting circuit density and channel count.
Input Offset Voltage (Max) 175 µV 125 µV Lower offset voltage improves DC precision; a difference here affects accuracy in high-gain or precision signal chains.
Input Bias Current (Typ) 0.5 pA 40 nA Bias current impacts error in high-impedance circuits; the JFET-input ADA4062 offers far lower bias current than the bipolar ADA4004.
Gain Bandwidth Product 1.4 MHz 12 MHz GBW sets the achievable closed-loop bandwidth and small-signal speed; the ADA4004 supports much wider bandwidth applications.
Slew Rate 3.3 V/µs 2.7 V/µs Slew rate limits large-signal response and distortion at high frequencies; affects how fast the output can track input transients.
Input Voltage Noise Density (1 kHz) 36 nV/√Hz 10 nV/√Hz Lower voltage noise improves SNR in low-level signal amplification; the ADA4004 is significantly quieter for precision sensing.
Supply Current per Amplifier (Typ) 165 µA 1.7 mA Quiescent current drives power budget; the ADA4062 is far more power-efficient, suited to battery-powered designs.
Supply Voltage Range ±5 V to ±15 V ±5 V to ±15 V Defines the allowable power supply window; matching ranges allow drop-in use in the same supply rails.
Operating Temperature Range -40 °C to +125 °C -40 °C to +125 °C Confirms both parts are rated for industrial/extended temperature environments, ensuring reliability under the same conditions.
Package 8-Lead SOIC 14-Lead SOIC Package footprint and pin count affect PCB layout and cannot be directly substituted without board redesign.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADA4004-4ARZ ADA4062-2ARZ
Series iPolar® -
Part Status Active Active
Amplifier Type General Purpose J-FET
Number of Circuits 4 2
Slew Rate 2.7V/µs 3.3V/µs
Gain Bandwidth Product 12 MHz 1.4 MHz
Current - Input Bias 40 nA 2 pA
Voltage - Input Offset 40 µV 750 µV
Current - Output / Channel 10 mA 20 mA
Voltage - Supply Span(Min) 10 V 8 V
Voltage - Supply Span(Max) 30 V 36 V
Operating Temperature -40°C ~ 125°C -40°C ~ 125°C
Mounting Type Surface Mount Surface Mount
Supply Current - 165µA (x2 Channels)

Frequently asked questions

What are the key differences between the ADA4062-2ARZ and ADA4004-4ARZ?

The ADA4062-2ARZ is a dual-channel, low-power JFET-input operational amplifier, while the ADA4004-4ARZ is a quad-channel, precision bipolar-input operational amplifier. The ADA4062-2ARZ offers low input bias current and low power consumption, whereas the ADA4004-4ARZ provides lower voltage noise and higher precision, making them suited to different application requirements.

How do the channel counts of the ADA4062-2ARZ and ADA4004-4ARZ differ?

The ADA4062-2ARZ integrates two operational amplifiers in a single package, while the ADA4004-4ARZ integrates four operational amplifiers. This difference affects PCB layout density and the number of signal channels that can be implemented per package.

What are the input bias current characteristics of the ADA4062-2ARZ and ADA4004-4ARZ?

The ADA4062-2ARZ uses a JFET input stage, which provides very low input bias current, typically in the picoampere range. The ADA4004-4ARZ uses a bipolar input stage, which has higher input bias current than the JFET-input ADA4062-2ARZ. The lower bias current of the ADA4062-2ARZ benefits high-impedance sensor interfaces.

How do the voltage noise specifications compare between the ADA4062-2ARZ and ADA4004-4ARZ?

The ADA4004-4ARZ is specified with low voltage noise density, making it suitable for precision signal conditioning where noise performance is critical. The ADA4062-2ARZ has higher voltage noise density than the ADA4004-4ARZ. Designs prioritizing low noise should evaluate the ADA4004-4ARZ, while low-power, high-impedance applications may favor the ADA4062-2ARZ.

Are the ADA4062-2ARZ and ADA4004-4ARZ pin-compatible?

No. The ADA4062-2ARZ is a dual op-amp in an 8-lead SOIC package, while the ADA4004-4ARZ is a quad op-amp in a 14-lead SOIC package. The different package sizes and pin counts mean they are not pin-compatible and cannot be directly substituted without PCB redesign.

Which applications suit the ADA4062-2ARZ versus the ADA4004-4ARZ?

The ADA4062-2ARZ is well suited to low-power, high-impedance signal chains such as photodiode and pH sensor interfaces, where low input bias current is important. The ADA4004-4ARZ is suited to precision, low-noise multichannel applications such as instrumentation amplifiers and active filters, where low offset and low voltage noise are required.

How do the supply current requirements of the ADA4062-2ARZ and ADA4004-4ARZ compare?

The ADA4062-2ARZ is designed for low power consumption, with a low supply current per amplifier. The ADA4004-4ARZ, as a precision quad op-amp, draws more total supply current per package due to its four channels and bipolar input stage. Power-sensitive designs should account for the total quiescent current of each package.

Can the ADA4062-2ARZ and ADA4004-4ARZ operate from the same supply voltage range?

Both devices are specified for operation on dual supplies in the range of ±5 V to ±15 V, as well as single-supply configurations within their specified limits. Designers should verify the exact supply range and output swing requirements against the respective manufacturer datasheets for the target operating conditions.