ADF4002BCPZ-RL7
아날로그 디바이스(주)
- Lifecycle
- Active
- Stock
- 7422 PCS
- Package
- WFQFN-20
- Series
- 클럭 타이밍 - 클럭 발생기, PLL, 주파수 합성기
ADF4002BCPZ-RL7과 ADF4007BCP에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.
Replacement verdict
The ADF4002BCPZ-RL7 and ADF4007BCP are both integer-N PLL frequency synthesizers in a 20-lead LFCSP package with a shared 3-wire serial interface and comparable supply requirements, making them a viable functional replacement candidate. However, the ADF4007BCP integrates an on-chip VCO and prescaler architecture optimized for fixed high-frequency synthesis, while the ADF4002BCPZ-RL7 is a standalone PLL synthesizer requiring an external VCO, so the designer must validate loop filter, reference, and RF front-end differences before substitution.
아날로그 디바이스(주)
아날로그 디바이스(주)
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADF4002BCPZ-RL7 | ADF4007BCP | Why it matters |
|---|---|---|---|
| Function | PLL Frequency Synthesizer (integer-N) | PLL Frequency Synthesizer (integer-N) | Both are integer-N PLL synthesizers, but they target different frequency ranges and applications, affecting direct substitutability. |
| Maximum RF Input Frequency | 400 MHz | 7.5 GHz | The ADF4007 supports much higher input frequencies, so it can be used in microwave/RF applications where the ADF4002 cannot operate. |
| Prescaler | 8/9, 16/17, 32/33, 64/65 (dual-modulus) | Fixed 8/9 (dual-modulus) | Different prescaler options affect the achievable division ratios and loop performance for a given reference and output frequency. |
| Supply Voltage Range | 2.7 V to 3.3 V | 3.0 V to 3.6 V | Overlapping but not identical supply ranges; a design operating at 2.7 V would not be compatible with the ADF4007. |
| Package | 20-Lead LFCSP (4 mm x 4 mm) | 20-Lead LFCSP (4 mm x 4 mm) | Same package footprint allows potential board-level interchangeability, though pin functions must be verified. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | Identical temperature ratings mean both suit the same industrial temperature environments. |
| Charge Pump Current | Programmable (up to 5 mA) | Programmable (up to 5 mA) | Similar charge pump capability supports comparable loop filter design and phase noise performance. |
| Interface | 3-wire serial (SPI-compatible) | 3-wire serial (SPI-compatible) | Same serial control interface simplifies firmware reuse when migrating between the two parts. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADF4002BCPZ-RL7 | ADF4007BCP |
|---|---|---|
| Supplier | - | Rochester Electronics, LLC |
| Part Status | Active | Obsolete |
| Type | Clock/Frequency Synthesizer (RF), Phase Detector | Clock/Frequency Synthesizer (RF) |
| PLL | Yes with Bypass | Yes |
| Input | CMOS, TTL | CMOS |
| Output | Clock | Clock |
| Ratio - Input: Output | 2:1 | 2:1 |
| Differential - Input: Output | Yes/No | Yes/No |
| Frequency - Max | 400MHz | 7.5GHz |
| Divider / Multiplier | Yes/No | Yes/No |
| Voltage - Supply | 2.7V ~ 3.3V | 2.7V ~ 3.3V |
| Mounting Type | Surface Mount | Surface Mount |
| Number of Circuits | 1 | - |
| Operating Temperature | -40°C ~ 85°C | - |
The ADF4002BCPZ-RL7 is a phase frequency detector (PFD) and charge pump from Analog Devices, specified for operation up to 400 MHz, supplied in a 20-lead LFCSP (CP-20-6) package and provided in tape-and-reel format. The ADF4007BCP is a related Analog Devices PFD/charge pump specified for operation up to 7.5 GHz, supplied in a 20-lead LFCSP package. Both are frequency synthesizer building blocks intended for use with an external VCO and loop filter.
Per Analog Devices datasheets, the ADF4002 is specified for a maximum RF input frequency of 400 MHz, while the ADF4007 is specified for a maximum RF input frequency of 7.5 GHz. The ADF4007 is therefore suited to higher-frequency synthesis applications, whereas the ADF4002 targets lower-frequency PLL designs.
Both devices are offered in a 20-lead LFCSP package, but pin compatibility must be confirmed against the respective Analog Devices datasheet pin configurations before any substitution. The two parts have different functional specifications and reference divider configurations, so a direct drop-in replacement should not be assumed without verifying pin functions and external component requirements.
The ADF4002 includes a programmable reference divider (14-bit R counter) and a programmable feedback divider (13-bit N counter), supporting a range of PFD frequencies. The ADF4007 uses a fixed reference divider ratio of 8 and a fixed feedback divider ratio of 8, with the PFD frequency determined by the input frequency divided by 8. This fixed-divider architecture makes the ADF4007 simpler to configure but less flexible than the ADF4002.
Both the ADF4002 and ADF4007 are specified by Analog Devices for operation from a 3.0 V to 3.6 V supply, with a nominal 3.3 V rail. The charge pump supply (VCP) can be operated at a higher voltage, up to 5.5 V, to support wider VCO tuning ranges. Designers should confirm the exact limits in the respective datasheets.
The -RL7 suffix indicates tape-and-reel packaging, with 7-inch reels, as defined in Analog Devices ordering information. The BCPZ designation identifies the 20-lead LFCSP package with Pb-free (RoHS-compliant) termination. The ADF4007BCP is supplied in the same 20-lead LFCSP package family, but its ordering suffix differs and should be checked against the manufacturer's ordering guide.
No, they are not direct substitutes. The ADF4007 has a fixed divide ratio of 8 in both reference and feedback paths and operates to 7.5 GHz, while the ADF4002 has programmable R and N dividers and operates to 400 MHz. The choice depends on the required PFD frequency, loop bandwidth, and VCO frequency; substituting one for the other requires revalidation of the loop filter and divider settings.
The ADF4002 is commonly used in low-frequency PLL synthesizers, clock generation, and as a PFD/charge pump in wireless infrastructure and instrumentation where programmable dividers are needed. The ADF4007 is used in higher-frequency synthesis, such as microwave point-to-point radios, satellite communications, and test equipment, where its 7.5 GHz input capability and fixed divide-by-8 architecture simplify the loop design.