ADF41513BCPZ vs ADF4107BCP

ADF41513BCPZ과 ADF4107BCP에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The ADF41513BCPZ and ADF4107BCP are not drop-in replacements for one another. Although both are integer-N/fractional-N PLL frequency synthesizers from Analog Devices, they differ fundamentally in maximum operating frequency, package footprint, and supply voltage range, requiring board-level redesign and firmware reconfiguration before substitution can be considered.

Different maximum frequency Different package footprint Different supply voltage range Different PLL architecture

Parts at a glance

Part A

ADF41513BCPZ

아날로그 디바이스(주)

Lifecycle
Active
Stock
6981 PCS
Package
WFQFN-24
Series
클럭 타이밍 - 클럭 발생기, PLL, 주파수 합성기
Part B

ADF4107BCP

아날로그 디바이스(주)

Lifecycle
Active
Stock
5195 PCS
Package
WFQFN-20
Series
클럭 타이밍 - 클럭 발생기, PLL, 주파수 합성기

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADF41513BCPZ ADF4107BCP Why it matters
Maximum Operating Frequency 13.5 GHz 7 GHz Determines the highest RF input the PLL can synthesize; the ADF41513 covers higher-frequency bands that the ADF4107 cannot reach.
PLL Type / Architecture Fractional-N Integer-N Fractional-N allows finer frequency resolution and faster settling, while integer-N is simpler but limited to integer multiples of the reference.
Maximum RF Input Frequency (Prescaler) 13.5 GHz 7 GHz The prescaler sets the usable VCO input range; a higher-rated prescaler enables operation with higher-frequency VCOs.
Supply Voltage Range 3.0 V to 3.6 V 2.7 V to 3.3 V Defines the compatible power rail; mismatched rails may require level shifting or a different regulator design.
Package 32-Lead LFCSP (5 mm x 5 mm) 20-Lead LFCSP (4 mm x 4 mm) Footprint and pin count differ, so a board redesign is required for substitution; the packages are not drop-in compatible.
Normalized Phase Noise Floor -227 dBc/Hz -219 dBc/Hz Lower phase noise floor yields cleaner synthesized signals, which is critical for high-performance RF and microwave systems.
Maximum Phase Detector Frequency 125 MHz 104 MHz Higher phase detector frequency improves in-band phase noise and allows wider loop bandwidths for faster lock times.
Number of PLLs 1 1 Both are single-PLL synthesizers, so the overall system architecture remains comparable for single-loop designs.
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C Identical temperature ratings mean both parts suit the same industrial-grade environmental conditions.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADF41513BCPZ ADF4107BCP
Supplier - Rochester Electronics, LLC
Part Status Active Obsolete
Type Integer-N/Fractional-N Clock/Frequency Synthesizer (RF)
PLL Yes Yes
Input CML, CMOS CMOS
Output Clock Clock
Ratio - Input: Output 2:1 2:1
Differential - Input: Output Yes/No Yes/No
Frequency - Max 26.5GHz 7GHz
Divider / Multiplier Yes/Yes No/No
Voltage - Supply 3.135V ~ 3.465V 2.7V ~ 3.3V
Mounting Type Surface Mount Surface Mount
Number of Circuits 1 -
Operating Temperature -40°C ~ 105°C -

Frequently asked questions

What are the key functional differences between the ADF41513BCPZ and the ADF4107BCP?

The ADF41513BCPZ is a 13 GHz fractional-N/integer-N PLL frequency synthesizer with an integrated VCO, while the ADF4107BCP is a 7 GHz integer-N PLL frequency synthesizer without an integrated VCO. The ADF41513BCPZ supports fractional-N operation and higher frequency operation, whereas the ADF4107BCP is limited to integer-N operation and lower maximum RF input frequency.

Are the ADF41513BCPZ and ADF4107BCP pin-compatible or package-compatible?

No. The ADF41513BCPZ is supplied in a 32-lead LFCSP package, while the ADF4107BCP is supplied in a 20-lead LFCSP package. The different package sizes, pin counts, and pin functions prevent direct PCB footprint compatibility between the two devices.

What is the maximum RF input frequency for each device?

The ADF41513BCPZ supports RF input frequencies up to 13 GHz. The ADF4107BCP supports RF input frequencies up to 7 GHz. Designs requiring operation above 7 GHz cannot use the ADF4107BCP.

Does either device include an integrated VCO?

The ADF41513BCPZ includes an integrated VCO, which simplifies loop filter and board-level design for frequency synthesis. The ADF4107BCP does not include an integrated VCO and requires an external VCO to complete the synthesizer loop.

What synthesizer architecture does each device use?

The ADF41513BCPZ supports both fractional-N and integer-N operation, enabling finer frequency resolution and flexibility in loop design. The ADF4107BCP is an integer-N synthesizer only, so frequency resolution is determined by the phase detector comparison frequency and reference divider settings.

Can the ADF4107BCP be used as a drop-in replacement for the ADF41513BCPZ?

No. The devices differ in package, pin count, frequency range, VCO integration, and fractional-N capability. A direct drop-in replacement is not possible; any substitution requires a full design review against the manufacturer datasheets, including loop filter, reference input, and PCB layout changes.

Which device is better suited for high-frequency microwave synthesis?

The ADF41513BCPZ is better suited for high-frequency microwave synthesis because it operates up to 13 GHz and includes an integrated VCO with fractional-N capability. The ADF4107BCP, limited to 7 GHz and integer-N operation without an integrated VCO, is more appropriate for lower-frequency integer-N synthesizer designs.