ADM211EARSZ
아날로그 디바이스(주)
- Lifecycle
- Active
- Stock
- 4657 PCS
- Package
- SSOP-28
- Series
- 인터페이스 - 드라이브, 수신기, 트랜시버
ADM211EARSZ과 ADM213ARS에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.
Replacement verdict
The ADM211EARSZ and ADM213ARS are both RS-232 transceivers from the same ADM2xxE family, sharing a common SOIC-28 wide-body footprint and 5 V single-supply architecture, so the ADM213ARS can serve as a functional replacement candidate for the ADM211EARSZ in most designs. However, the two devices differ in driver/receiver channel count and in the number of on-chip charge-pump capacitors, so the replacement should be validated against the specific interface requirements and board layout before adoption.
아날로그 디바이스(주)
아날로그 디바이스(주)
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADM211EARSZ | ADM213ARS | Why it matters |
|---|---|---|---|
| Number of Drivers | 4 | 4 | Driver count determines how many transmit lines the interface can drive; both match here. |
| Number of Receivers | 5 | 5 | Receiver count determines how many receive lines are supported; both match here. |
| Data Rate | 120 kbps | 120 kbps | Maximum data rate affects compatibility with the host UART and cable length; both are equal. |
| Supply Voltage | 5 V | 5 V | Operating supply voltage must match the system rail; both are 5 V single-supply devices. |
| External Capacitors | 4 x 0.1 uF | 4 x 0.1 uF | Charge-pump capacitor count and value affect board layout and BOM; both require four 0.1 uF caps. |
| Operating Temperature Range | -40 to +85 C | -40 to +85 C | Temperature range determines suitability for industrial vs commercial environments; both are industrial grade. |
| Package / Case | 20-SSOP | 24-SSOP | Package footprint and pin count must match the PCB layout; these differ, so they are not drop-in replacements. |
| Pin Count | 20 | 24 | Different pin counts mean different footprints and cannot be substituted without a board redesign. |
| Mounting Type | Surface Mount | Surface Mount | Mounting style must match the assembly process; both are surface-mount devices. |
| RoHS Compliance | Yes | Yes | RoHS status affects regulatory compliance for shipped products; both are compliant. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADM211EARSZ | ADM213ARS |
|---|---|---|
| Supplier | - | Analog Devices Inc.,Rochester Electronics, LLC |
| Part Status | Active | Obsolete |
| Type | Transceiver | Transceiver |
| Protocol | RS232 | RS232 |
| Number of Drivers/Receivers | 4/5 | 4/5 |
| Duplex | Full | Full |
| Receiver Hysteresis | 650 mV | 650 mV |
| Data Rate | 120Kbps | 120Kbps |
| Voltage - Supply | 4.5V ~ 5.5V | 4.5V ~ 5.5V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
| Mounting Type | Surface Mount | Surface Mount |
The ADM211EARSZ is a 5 V, dual-channel RS-232 line driver/receiver with two drivers and two receivers, specified over the industrial temperature range and supplied in a 28-lead SSOP package. The ADM213ARS is a 5 V, dual-channel RS-232 transceiver with two drivers and two receivers, specified over the industrial temperature range and supplied in a 28-lead SSOP package. Both integrate charge pump circuitry for single-supply operation, but they differ in external capacitor configuration and specific parametric limits as defined in their respective datasheets.
Both devices are offered in a 28-lead SSOP package, but pin compatibility must be confirmed against the manufacturer pinout diagrams. The ADM211EARSZ and ADM213ARS share the same package outline, yet the function of individual pins, particularly around the charge pump capacitor connections, may differ. Designers should verify pin assignments in the Analog Devices datasheets before considering a direct board-level substitution.
Both the ADM211EARSZ and ADM213ARS operate from a single 5 V supply. They include on-chip charge pump converters that generate the positive and negative RS-232 voltage levels required for compliant driver output swings from the single 5 V rail.
Each device integrates two RS-232 drivers and two RS-232 receivers. This dual-channel configuration supports two full-duplex or four half-duplex communication lines, making both parts suitable for serial port applications requiring a compact transceiver solution.
Both devices are specified for RS-232 data rates consistent with the standard. The ADM211EARSZ and ADM213ARS datasheets define their maximum guaranteed data rates under specified load conditions. Designers should consult the respective Analog Devices datasheets for the exact guaranteed data rate and capacitive load conditions applicable to each part.
Both the ADM211EARSZ and ADM213ARS are specified for the industrial temperature range of -40°C to +85°C. This makes them suitable for industrial and embedded applications requiring reliable RS-232 communication across a wide ambient temperature span.
Interchangeability depends on the specific design. Although both are 5 V dual-channel RS-232 transceivers in a 28-lead SSOP package, differences in external capacitor requirements, pin functions, and parametric specifications may affect operation. A direct substitution should only be made after comparing both datasheets and validating the design against the target part's electrical and mechanical requirements.