ADM3054BRWZ vs ADM3076EARZ

ADM3054BRWZ과 ADM3076EARZ에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The ADM3076EARZ and ADM3054BRWZ are not drop-in replacements for one another. The ADM3076EARZ is a 3.3 V RS-485/RS-422 transceiver in an 8-lead SOIC package, while the ADM3054BRWZ is a 5 kV rms isolated CAN transceiver in a 16-lead SOIC wide-body package. They differ in bus protocol, isolation, supply voltage, and package footprint, so substituting one for the other requires a full redesign rather than a direct swap.

Different bus protocol Different isolation Different supply voltage Different package footprint

Parts at a glance

Part A

ADM3054BRWZ

아날로그 디바이스(주)

Lifecycle
Active
Stock
5622 PCS
Package
SOIC-16
Series
인터페이스 - 드라이브, 수신기, 트랜시버
Part B

ADM3076EARZ

아날로그 디바이스(주)

Lifecycle
Active
Stock
5876 PCS
Package
SOIC-14
Series
인터페이스 - 드라이브, 수신기, 트랜시버

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADM3076EARZ ADM3054BRWZ Why it matters
Function / Protocol RS-485/RS-422 transceiver Isolated CAN transceiver These devices serve entirely different bus protocols (RS-485 vs CAN), so they are not functionally interchangeable in a given network.
Isolation Non-isolated Galvanically isolated (5 kV rms) Isolation protects against ground loops and high common-mode voltages; the isolated part is required in safety or noisy environments.
Data Rate 16 Mbps 1 Mbps Maximum signaling speed determines whether the part meets the timing budget of the bus; the RS-485 part is much faster.
Supply Voltage 3.3 V 5 V (VCC) with 3.3 V/5 V logic supply (VIO) Supply requirements dictate power-rail design and logic-level compatibility with the host controller.
Duplex / Channel Configuration Full duplex Half duplex (single CAN channel) Duplex configuration affects wiring topology and whether simultaneous transmit/receive is possible.
Number of Drivers/Receivers 1 driver, 1 receiver 1 driver, 1 receiver (CAN) Channel count defines how many bus lines can be driven and monitored by a single device.
Package 8-lead SOIC (R-8) 16-lead SOIC (RW-16) Footprint and pin count must match the PCB layout; these packages are not drop-in compatible.
Operating Temperature Range -40 °C to +85 °C -40 °C to +105 °C Temperature range determines suitability for industrial or automotive environments with wide thermal excursions.
Fail-Safe Receiver Yes (open/short fail-safe) Not applicable (CAN dominant/recessive) Fail-safe behavior ensures a defined logic state on an idle or faulted bus, preventing spurious data.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADM3054BRWZ ADM3076EARZ
Series iCoupler® -
Part Status Active Active
Type Transceiver, Isolated Transceiver
Protocol CAN RS422, RS485
Number of Drivers/Receivers 1/1 1/1
Data Rate 1Mbps 16Mbps
Voltage - Supply 0.5V ~ 6V 3V ~ 3.6V
Operating Temperature -40°C ~ 125°C -40°C ~ 85°C
Mounting Type Surface Mount Surface Mount
Duplex - Full
Receiver Hysteresis - 100 mV

Frequently asked questions

What are the primary functional differences between the ADM3076EARZ and the ADM3054BRWZ?

The ADM3076EARZ is a 3.3 V, ±15 kV ESD-protected, half-duplex RS-485/RS-422 transceiver specified for data rates up to 500 kbps. The ADM3054BRWZ is a 5 kV rms signal-isolated CAN transceiver compliant with ISO 11803-2, operating from a single 5 V supply on the logic side and a 4.5 V to 5.5 V isolated supply on the bus side. They serve different bus protocols (RS-485 vs. CAN) and are not functionally interchangeable.

Are the ADM3076EARZ and ADM3054BRWZ pin-to-pin compatible?

No. The ADM3076EARZ is offered in an 8-lead SOIC package with a standard RS-485 transceiver pinout (RO, RE, DE, DI, GND, A, B, VCC). The ADM3054BRWZ is offered in a 16-lead SOIC wide-body package with a CAN transceiver pinout including TXD, RXD, VCC, VIO, GND1, GND2, CANH, CANL, and isolation-related pins. Package size, pin count, and pin functions differ, so they are not drop-in replacements.

Do these devices support the same bus protocol and therefore the same network topology?

No. The ADM3076EARZ supports RS-485/RS-422 multidrop buses, typically up to 256 nodes depending on loading, using differential A/B lines. The ADM3054BRWZ supports CAN (ISO 11803-2) buses using differential CANH/CANL lines with arbitration-based multi-master operation. The protocols, framing, and physical layer requirements are different, so they cannot share the same network.

What are the supply voltage and isolation differences between the two parts?

The ADM3076EARZ operates from a single 3.3 V supply and provides no galvanic isolation. The ADM3054BRWZ requires a 5 V logic-side supply (VCC) and a 4.5 V to 5.5 V isolated bus-side supply, and provides 5 kV rms signal isolation between the logic and bus sides. Designs requiring isolation must use the ADM3054BRWZ or an equivalent isolated transceiver, not the ADM3076EARZ.

How do the ESD and transient protection ratings compare?

The ADM3076EARZ is specified with ±15 kV ESD protection on the RS-485 bus pins (human body model) per the Analog Devices datasheet. The ADM3054BRWZ datasheet specifies ESD protection on the CAN bus pins, but the exact rating should be confirmed from the current Analog Devices datasheet before design sign-off. The two parts are specified under different bus interface standards, so ESD ratings are not directly comparable.

Can the ADM3076EARZ be used as a substitute for the ADM3054BRWZ in a CAN application?

No. The ADM3076EARZ is an RS-485/RS-422 transceiver and does not implement CAN protocol signaling, differential drive characteristics, or arbitration support required by ISO 11803-2. Substituting it into a CAN network would not provide compliant CAN communication and would also remove the galvanic isolation provided by the ADM3054BRWZ.

What data rate and bus length considerations apply to each device?

The ADM3076EARZ is specified for data rates up to 500 kbps, which supports longer RS-485 cable runs consistent with the RS-485 standard's rate-versus-length tradeoff. The ADM3054BRWZ supports CAN data rates up to 1 Mbps per the ISO 11803-2 standard, with bus length limited accordingly. Actual achievable distance depends on cable characteristics, termination, stub length, and node count, and should be validated against the respective datasheets and standard guidelines.

Which device should be selected for an isolated industrial network interface?

For an isolated CAN interface, the ADM3054BRWZ is the appropriate choice because it integrates 5 kV rms signal isolation and a CAN transceiver in a single package. For a non-isolated RS-485/RS-422 interface, the ADM3076EARZ is appropriate. Selection should be based on the required bus protocol, isolation requirement, supply rails, and package footprint, verified against the current Analog Devices datasheets.