ADM3485EAR vs ADM3485ARZ

ADM3485EAR과 ADM3485ARZ에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The ADM3485EAR is a functional replacement candidate for the ADM3485ARZ, sharing the same RS-485 transceiver function, 3.3 V supply, SOIC-8 footprint, and industrial temperature range. The primary distinction is the enhanced ESD protection on the ADM3485EAR, which requires validation against the target application's transient immunity requirements before substitution.

Function and Protocol High match
Package and Pinout High match
Supply Voltage High match
ESD Protection Level Validation required

Parts at a glance

Part A

ADM3485EAR

아날로그 디바이스(주)

Lifecycle
Active
Stock
3150 PCS
Package
SOIC-8
Series
인터페이스 - 드라이브, 수신기, 트랜시버
Part B

ADM3485ARZ

아날로그 디바이스(주)

Lifecycle
Active
Stock
5989 PCS
Package
SOIC-8
Series
인터페이스 - 드라이브, 수신기, 트랜시버

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADM3485ARZ ADM3485EAR Why it matters
ESD Protection (IEC 61000-4-2) ±8 kV contact / ±15 kV air (standard) ±15 kV contact / ±15 kV air (enhanced) Higher ESD ratings improve robustness in harsh industrial environments and reduce field failures from electrostatic discharge.
Data Rate 10 Mbps 10 Mbps Both support the same maximum data rate, so bus timing and cable length constraints remain equivalent.
Operating Temperature Range -40°C to +85°C -40°C to +85°C Identical temperature ratings ensure the same environmental suitability for industrial applications.
Supply Voltage 3.0 V to 3.6 V 3.0 V to 3.6 V Matching supply ranges confirm both parts are drop-in compatible for 3.3 V systems.
Duplex Mode Half-duplex Half-duplex Both are half-duplex RS-485 transceivers, so bus topology and driver/receiver enable logic are interchangeable.
Number of Drivers/Receivers 1 driver / 1 receiver 1 driver / 1 receiver Identical transceiver count means the same network node configuration applies to both parts.
Package 8-lead SOIC 8-lead SOIC Same package and pinout allow direct PCB replacement without layout changes.
Fail-Safe Receiver Yes (open/short circuit) Yes (open/short circuit) Fail-safe receivers guarantee a defined logic state on floating or terminated buses, preventing spurious data.
ESD Protection (Human Body Model) ±15 kV HBM ±15 kV HBM Equivalent HBM ratings indicate comparable handling robustness during assembly and field use.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADM3485EAR ADM3485ARZ
Part Status Obsolete Active
Type Transceiver Transceiver
Protocol RS422, RS485 RS422, RS485
Number of Drivers/Receivers 1/1 1/1
Duplex Half Half
Receiver Hysteresis 50 mV 50 mV
Data Rate 10Mbps 10Mbps
Voltage - Supply 3V ~ 3.6V 3V ~ 3.6V
Operating Temperature -40°C ~ 85°C -40°C ~ 85°C
Mounting Type Surface Mount Surface Mount

Frequently asked questions

What are the key differences between the ADM3485ARZ and the ADM3485EAR?

Both are 3.3 V, half-duplex RS-485/RS-422 transceivers in an 8-lead SOIC package. The primary difference is the ESD protection level: the ADM3485ARZ offers ±15 kV ESD protection on the RS-485 bus pins, while the ADM3485EAR offers enhanced ±15 kV IEC 61000-4-2 contact discharge and ±15 kV air discharge protection, making the EAR variant better suited for harsh environments requiring higher immunity.

Are the ADM3485ARZ and ADM3485EAR pin-compatible?

Yes. Both devices are offered in the same 8-lead SOIC (R-8) package with identical pin assignments: RO, RE, DE, DI, GND, A, B, and VCC. This allows the ADM3485EAR to be used as a drop-in replacement for the ADM3485ARZ on an existing PCB layout.

Do both parts support the same data rate and supply voltage?

Yes. Both the ADM3485ARZ and ADM3485EAR operate from a single 3.3 V supply and support data rates up to 12 Mbps, making them suitable for high-speed RS-485/RS-422 communication networks.

What is the difference in ESD protection between the two variants?

The ADM3485ARZ provides ±15 kV ESD protection on the RS-485 bus pins (A and B) per the human body model. The ADM3485EAR provides enhanced ESD protection compliant with IEC 61000-4-2, offering ±15 kV contact discharge and ±15 kV air discharge on the bus pins, which is more robust for industrial environments.

Can the ADM3485EAR directly replace the ADM3485ARZ in an existing design?

In most cases yes, since both share the same package, pinout, supply voltage, and data rate. However, the ADM3485EAR's enhanced IEC 61000-4-2 ESD rating may allow removal of external TVS diodes in some designs, so the overall protection scheme should be reviewed against the target application's requirements.

Are both devices half-duplex or full-duplex transceivers?

Both the ADM3485ARZ and ADM3485EAR are half-duplex RS-485/RS-422 transceivers, featuring separate receiver output (RO) and driver input (DI) pins with active-low receiver enable (RE) and active-high driver enable (DE) control pins.

What is the operating temperature range for these transceivers?

Both the ADM3485ARZ and ADM3485EAR are specified for the industrial temperature range of −40°C to +85°C, making them suitable for industrial automation, building control, and other demanding applications.