ADM708TARZ-REEL vs ADM709RAR

ADM708TARZ-REEL과 ADM709RAR에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The ADM708TARZ-REEL and ADM709RAR are both single-voltage supervisor ICs in 8-pin SOIC packages with active-low reset outputs, making them functionally comparable for many supervisory applications. However, the ADM708TARZ-REEL offers a higher reset threshold tolerance grade and a manual reset input, while the ADM709RAR provides a watchdog timer function. Designers should validate reset threshold accuracy, watchdog requirements, and pin-level configuration against the target system before substituting one for the other.

Reset Threshold Validation required
Watchdog Function Not compatible
Package Type High match
Manual Reset Input Validation required

Parts at a glance

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADM708TARZ-REEL ADM709RAR Why it matters
Reset Threshold Voltage (Typ) 4.40 V 4.65 V Determines the supply voltage level at which a reset is asserted; a different threshold changes the monitored rail tolerance and can affect system behavior.
Reset Output Type Active-low push-pull (RESET) plus active-high (RESET-bar complementary) Active-low push-pull (RESET) The output logic polarity and drive style must match the processor's reset input; a mismatch can invert reset behavior or require external logic.
Manual Reset Input Yes (MR) No A manual reset input allows a push-button or external signal to force a system reset; its absence removes that capability.
Watchdog Timer Yes (WDI) No A watchdog monitors processor activity and issues a reset on a hang; systems relying on watchdog supervision cannot substitute a part without it.
Reset Timeout Delay 200 ms (typ) 200 ms (typ) The reset pulse width must be long enough for the processor to initialize; matching delays preserve startup timing.
Supply Voltage Range 1.0 V to 5.5 V 1.0 V to 5.5 V Defines the operating supply window; both parts support the same low-voltage rails, so power-supply compatibility is maintained.
Supply Current (Typ) 60 µA 60 µA Quiescent current affects battery life and thermal budget in low-power designs; identical values mean no power penalty when substituting.
Package 8-lead SOIC (N) 8-lead SOIC (N) Package and pinout must match for a drop-in replacement on an existing PCB footprint.
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C The temperature range must cover the application environment; identical ratings ensure equivalent environmental robustness.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADM708TARZ-REEL ADM709RAR
Part Status Active Obsolete
Type Simple Reset/Power-On Reset Simple Reset/Power-On Reset
Number of Voltages Monitored 1 1
Voltage - Threshold 3.08V 2.63V
Output Push-Pull, Push-Pull Push-Pull, Totem Pole
Reset Active High/Active Low Active Low
Reset Timeout 160ms Minimum 140ms Minimum
Operating Temperature -40°C ~ 85°C (TA) -40°C ~ 85°C (TA)
Mounting Type Surface Mount Surface Mount

Frequently asked questions

What are the key differences between the ADM708TARZ-REEL and the ADM709RAR?

The ADM708TARZ-REEL is a microprocessor supervisory circuit with an active-low reset output and a watchdog timer, supplied in an 8-lead SOIC package and provided on tape and reel. The ADM709RAR is a similar supervisory circuit but provides an active-high reset output and is supplied in an 8-lead SOIC package in tube form. The primary functional difference is the reset output polarity: active-low for the ADM708 versus active-high for the ADM709.

Do the ADM708TARZ-REEL and ADM709RAR have the same reset threshold voltage?

No. The ADM708TARZ-REEL is specified with a reset threshold of 3.08 V (typical), while the ADM709RAR is specified with a reset threshold of 2.63 V (typical). The threshold suffix in each part number denotes the monitored supply voltage range, so these two devices are not threshold-equivalent.

Are the ADM708TARZ-REEL and ADM709RAR pin-compatible?

Both devices are offered in an 8-lead SOIC package with the same pin count, but the reset output pin function differs: the ADM708 provides an active-low RESET output, whereas the ADM709 provides an active-high RESET output. Because the output polarity differs, the two parts are not functionally interchangeable on the same PCB without verifying the logic requirements of the host processor.

What supply voltage range do these supervisory circuits support?

Both the ADM708TARZ-REEL and the ADM709RAR operate from a supply voltage range of 1.0 V to 5.5 V, making them suitable for monitoring low-voltage logic supplies in microprocessor and microcontroller systems.

Does the ADM708TARZ-REEL include a watchdog timer?

Yes. The ADM708TARZ-REEL integrates a watchdog timer function in addition to the power-on reset and manual reset inputs. The watchdog monitors microprocessor activity and asserts a reset if the processor fails to toggle the watchdog input within the timeout period.

What is the difference in packaging and ordering between the two parts?

The ADM708TARZ-REEL is supplied in an 8-lead SOIC package on tape and reel, which is intended for automated high-volume assembly. The ADM709RAR is supplied in an 8-lead SOIC package in tube form. Both are RoHS-compliant, but the ordering suffix reflects different packaging formats.

Can the ADM709RAR be used as a drop-in replacement for the ADM708TARZ-REEL?

Not directly. Although both are 8-lead SOIC supervisory circuits, the ADM709RAR provides an active-high reset output while the ADM708TARZ-REEL provides an active-low reset output, and their reset threshold voltages differ (2.63 V versus 3.08 V typical). A replacement requires verifying reset polarity compatibility with the processor and confirming that the monitored supply rail matches the selected threshold.

What are the typical applications for these microprocessor supervisory circuits?

Both devices are used for power-supply monitoring and reset generation in microprocessor, microcontroller, and digital logic systems. Typical applications include ensuring a defined reset state during power-up and power-down, detecting brownout conditions, and, in the case of the ADM708TARZ-REEL, monitoring processor activity via the watchdog timer.