ADN2816ACPZ vs ADN2850BCPZ250

ADN2816ACPZ과 ADN2850BCPZ250에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The ADN2816ACPZ and ADN2850BCPZ250 serve fundamentally different functions and cannot be treated as interchangeable. The ADN2816ACPZ is a clock and data recovery IC for optical receiver front ends, while the ADN2850BCPZ250 is a dual-channel digital potentiometer. Their differing signal interfaces, channel architecture, package footprints, and operating characteristics make direct substitution impractical without a complete redesign of the surrounding circuit.

Different device function Different signal interface Different channel architecture Different package footprint

Parts at a glance

Part A

ADN2816ACPZ

아날로그 디바이스(주)

Lifecycle
Active
Stock
5594 PCS
Package
LFCSP-32
Series
시계 타이밍 - 특정 애플리케이션

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADN2816ACPZ ADN2850BCPZ250 Why it matters
Function / Device Type Clock and data recovery (CDR) IC with quantizer Dual-channel digital potentiometer (nonvolatile) These are fundamentally different device classes, so they are not functionally substitutable in any design.
Primary Application SONET/SDH, Gigabit Ethernet, and fiber-optic receiver data recovery Programmable resistance/voltage adjustment, calibration, and signal level setting The intended use cases do not overlap, confirming they serve unrelated circuit functions.
Supply Voltage 3.3 V (3.0 V to 3.6 V) 2.7 V to 5.5 V (dual supply capable) Different supply requirements affect power rail compatibility and board-level integration.
Package 32-lead LFCSP (5 mm x 5 mm) 24-lead LFCSP (4 mm x 4 mm) Different footprint and pin count prevent drop-in board replacement.
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C Both meet industrial temperature requirements, though this does not offset their functional differences.
Interface / Control Analog/differential data input with recovered clock and data outputs SPI-compatible serial interface for wiper position control The control and signal interfaces are entirely different, so neither can emulate the other in a system.
Data Rate / Resolution Supports OC-3 to OC-48 (up to 2.7 Gbps) data rates 250 kΩ end-to-end resistance with 1024-position resolution One specifies serial data throughput while the other specifies resistance resolution, highlighting their distinct roles.
Nonvolatile Memory None EEPROM stores wiper settings Only the digital potentiometer retains configuration across power cycles, a capability irrelevant to the CDR device.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADN2816ACPZ ADN2850BCPZ250
Part Status Active Active
PLL Yes -
Main Purpose SONET/SDH -
Input CML -
Output LVDS -
Number of Circuits 1 -
Ratio - Input: Output 1:2 -
Differential - Input: Output Yes/Yes -
Frequency - Max 675MHz -
Voltage - Supply 3V ~ 3.6V -
Operating Temperature -40°C ~ 85°C -
Mounting Type Surface Mount -

Frequently asked questions

Are the ADN2816ACPZ and ADN2850BCPZ250 functionally interchangeable?

No. The ADN2816ACPZ is a clock and data recovery (CDR) IC for continuous-rate 10 Mbps to 675 Mbps SONET/SDH, Fibre Channel, and Ethernet applications, while the ADN2850BCPZ250 is a dual-channel, 250 kΩ, 1024-position nonvolatile digital potentiometer. They serve entirely different functions and are not interchangeable.

What are the primary functions of each device?

The ADN2816ACPZ provides clock and data recovery with integrated limiting amplifier and quantization functions for serial data streams. The ADN2850BCPZ250 provides digitally controlled variable resistance via an SPI-compatible interface, with two independent 250 kΩ channels and nonvolatile EEMEM storage of wiper settings.

Do both devices use the same package and pinout?

No. The ADN2816ACPZ is supplied in a 32-lead LFCSP (5 mm × 5 mm) package, while the ADN2850BCPZ250 is supplied in a 24-lead LFCSP (4 mm × 4 mm) package. Pin counts, pin functions, and PCB land patterns differ, so neither device can be dropped into the other's footprint.

What supply voltages do these devices require?

The ADN2816ACPZ operates from a single 3.3 V supply (3.0 V to 3.6 V). The ADN2850BCPZ250 operates from a 2.7 V to 5.5 V single supply (or ±2.5 V dual supply), with a separate VDD for the digital interface. Designs must account for these different supply requirements.

What are the key performance specifications of the ADN2816ACPZ?

The ADN2816ACPZ supports continuous data rates from 10 Mbps to 675 Mbps, provides quantified output with typical jitter generation below 0.1 UI rms, and includes loss-of-lock and loss-of-signal detection. It is specified for SONET/SDH OC-1/OC-3/OC-12, Fibre Channel, and Gigabit Ethernet applications.

What are the key performance specifications of the ADN2850BCPZ250?

The ADN2850BCPZ250 offers two independent 250 kΩ, 1024-position digital potentiometers with ±1% resistor tolerance (B version), an SPI-compatible serial interface, nonvolatile EEMEM for wiper position storage, and an operating temperature range of −40 °C to +85 °C. It is used for gain adjustment, offset trimming, and programmable resistance applications.

Can these two parts share a common SPI or control interface?

No. The ADN2850BCPZ250 has an SPI-compatible digital interface for wiper control. The ADN2816ACPZ does not have an SPI control interface; its configuration and status are handled through dedicated pins (such as SDO, SDATA, SCLK for its internal register access) and hardware control pins. They cannot share a common control bus in the same manner.

Are these devices qualified for the same operating temperature range?

The ADN2816ACPZ is specified over the −40 °C to +85 °C industrial temperature range. The ADN2850BCPZ250 is also specified over −40 °C to +85 °C. Both are industrial-grade parts, but each must be evaluated against its own datasheet limits for the target application.