ADS1100A1IDBVR vs ADS1100A3IDBVR

ADS1100A1IDBVR과 ADS1100A3IDBVR에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The ADS1100A1IDBVR and ADS1100A3IDBVR are functionally interchangeable 16-bit delta-sigma ADCs that share the same SOT-23-6 package, I2C interface, and pinout; the only meaningful distinction is the factory-programmed I2C slave address, so the A3 variant can serve as a drop-in replacement for the A1 variant provided the system firmware is updated to target the alternate address and both devices are not required on the same bus simultaneously.

Resolution and ADC Architecture High match
Package and Pinout High match
Supply Voltage Range High match
I2C Slave Address Validation required

Parts at a glance

Part A

ADS1100A1IDBVR

텍사스 인스트루먼트(주)

Lifecycle
Active
Stock
1553 PCS
Package
SOT-23-6
Series
데이터 수집 - 아날로그 변환기(ADC)
Part B

ADS1100A3IDBVR

텍사스 인스트루먼트(주)

Lifecycle
Active
Stock
493 PCS
Package
SOT-23-6
Series
데이터 수집 - 아날로그 변환기(ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADS1100A1IDBVR ADS1100A3IDBVR Why it matters
Resolution (bits) 16 16 Both are 16-bit delta-sigma ADCs, so resolution is identical and not a differentiator.
Programmable Gain Amplifier (PGA) settings 1, 2, 4, 8 1, 2, 4, 8 PGA gain range determines the smallest input signal that can be resolved; both devices offer the same gain options.
Data rate (SPS) 8, 16, 32, 128 8, 16, 32, 128 Output data rate affects conversion speed and noise performance; both parts support the same selectable rates.
Supply voltage range (V) 2.7 to 5.5 2.7 to 5.5 Supply range determines compatibility with system rails; both operate over the same 2.7 V to 5.5 V range.
Interface I2C I2C The communication interface must match the host bus; both use I2C, so they are drop-in compatible on the bus.
Package SOT-23-6 SOT-23-6 Package footprint and pinout must match for board-level substitution; both are SOT-23-6.
Input type Differential Differential Differential inputs improve common-mode rejection; both devices provide a differential input configuration.
Operating temperature range (°C) -40 to 85 -40 to 85 Temperature range affects suitability for industrial environments; both are rated for the same extended range.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADS1100A1IDBVR ADS1100A3IDBVR
Supplier - Texas Instruments,Rochester Electronics, LLC
Part Status Active Obsolete
Number of Bits 16 16
Sampling Rate(Per Second) 128 128
Number of Inputs 1 1
Input Type Differential, Single Ended Differential, Single Ended
Data Interface I²C I²C
Configuration PGA-ADC PGA-ADC
Number of A/D Converters 1 1
Architecture Sigma-Delta Sigma-Delta
Reference Type Supply Supply
Voltage - Supply, Analog 2.7V ~ 5.5V 2.7V ~ 5.5V
Voltage - Supply, Digital 2.7V ~ 5.5V 2.7V ~ 5.5V
Features PGA, Selectable Address PGA, Selectable Address
Operating Temperature -40°C ~ 85°C -40°C ~ 85°C

Frequently asked questions

What is the difference between the ADS1100A1IDBVR and ADS1100A3IDBVR?

The ADS1100A1IDBVR and ADS1100A3IDBVR are both 16-bit, self-calibrating, delta-sigma analog-to-digital converters from Texas Instruments in a SOT-23-6 package. The primary difference is the factory-programmed PGA gain setting: the A1 variant is configured for a gain of 1, while the A3 variant is configured for a gain of 8. Both devices share the same I2C interface, internal oscillator, and supply voltage range.

What is the programmable gain amplifier (PGA) setting for each device?

The ADS1100A1IDBVR has a fixed PGA gain of 1, and the ADS1100A3IDBVR has a fixed PGA gain of 8. These gain settings are factory-programmed and cannot be changed by the user.

What is the input voltage range for each variant?

For the ADS1100A1IDBVR (gain = 1), the full-scale input range is ±VDD. For the ADS1100A3IDBVR (gain = 8), the full-scale input range is ±VDD/8. Both devices operate from a single supply of 2.7 V to 5.5 V.

What is the data rate and resolution of these ADCs?

Both the ADS1100A1IDBVR and ADS1100A3IDBVR provide 16-bit resolution with a programmable data rate of 8, 16, 32, or 128 samples per second (SPS), selectable via the I2C interface.

Are the ADS1100A1IDBVR and ADS1100A3IDBVR pin-compatible?

Yes, both devices are offered in the same SOT-23-6 (DBV) package with identical pin functions, making them pin-compatible. However, because the PGA gain differs, the input signal range and effective resolution for a given input signal will differ between the two variants.

Can the ADS1100A1IDBVR be replaced by the ADS1100A3IDBVR in an existing design?

Direct replacement is possible only if the design can accommodate the different PGA gain. The A3 variant's gain of 8 reduces the full-scale input range to ±VDD/8, so the input signal must be scaled accordingly. The I2C address and package are the same, but the gain difference must be validated against the target application requirements.

What is the I2C address of these devices?

Both the ADS1100A1IDBVR and ADS1100A3IDBVR use a fixed I2C 7-bit address of 1001000 (0x48). The address is not programmable.

What are the operating temperature and supply voltage specifications?

Both variants are specified for operation from 2.7 V to 5.5 V and over an ambient temperature range of -40°C to +85°C, as stated in the Texas Instruments datasheet.