ADS1220IPW
텍사스 인스트루먼트(주)
- Lifecycle
- Active
- Stock
- 4062 PCS
- Package
- TSSOP-16
- Series
- 데이터 수집 - 아날로그 변환기(ADC)
ADS1220IPW과 ADS1203IPWR에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.
Replacement verdict
The ADS1220IPW and ADS1203IPWR are not functionally interchangeable despite sharing a TSSOP package family. The ADS1220IPW is a 24-bit precision delta-sigma ADC with an integrated PGA and SPI interface, while the ADS1203IPWR is a 16-bit isolated delta-sigma modulator with a single-bit Manchester-encoded output. Their differing resolution, output architecture, and interface schemes make direct substitution impractical without a full system redesign.
텍사스 인스트루먼트(주)
텍사스 인스트루먼트(주)
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS1220IPW | ADS1203IPWR | Why it matters |
|---|---|---|---|
| Resolution (bits) | 24 | 16 | Higher resolution enables finer measurement of small signal changes; a 24-bit delta-sigma ADC resolves much smaller LSBs than a 16-bit device. |
| Architecture | Delta-sigma (precision ADC) | Delta-sigma modulator | The ADS1220 is a complete ADC with digital filter and SPI interface, while the ADS1203 is a modulator-only device requiring external digital filtering, affecting system design and substitutability. |
| Input channels | 4 (2 differential / 4 single-ended) | 1 differential | Channel count determines how many signals can be measured; the ADS1220 supports multiplexed multi-channel sensing while the ADS1203 handles a single differential input. |
| Output interface | SPI | Digital modulator bitstream (1-bit) | Interface compatibility dictates whether the part can drop into an existing digital bus; SPI is a standard register-based interface, whereas the modulator output requires a dedicated digital filter/decimation stage. |
| Programmable gain amplifier (PGA) | Yes (gain 1 to 128) | No | An integrated PGA allows direct amplification of low-level sensor signals, reducing external components; its absence in the ADS1203 requires external signal conditioning. |
| Supply voltage | 2.3 V to 5.5 V (analog and digital) | 4.5 V to 5.5 V | Supply range affects compatibility with low-voltage logic and battery-powered systems; the ADS1220 operates over a wider and lower voltage range. |
| Package | 16-pin TSSOP | 16-pin TSSOP | Package footprint determines PCB layout compatibility; both share the same TSSOP-16 footprint, easing board-level substitution. |
| Operating temperature range | -40 °C to +125 °C | -40 °C to +105 °C | Temperature range affects suitability for harsh environments; the ADS1220 supports a higher maximum operating temperature. |
| Internal reference | Yes (internal 2.048 V reference) | No (external reference required) | An internal reference simplifies design and reduces external components; the ADS1203 requires an external reference, adding board complexity. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS1220IPW | ADS1203IPWR |
|---|---|---|
| Supplier | - | Texas Instruments,Rochester Electronics, LLC |
| Part Status | Active | Obsolete |
| Type | - | Modulator |
| Number of Channels | - | 1 |
| Resolution(Bits) | - | 16 b |
| Sampling Rate(Per Second) | 2k | 40k |
| Data Interface | SPI | Serial |
| Voltage Supply Source | - | Single Supply |
| Voltage - Supply | - | 4.75V ~ 5.25V |
| Operating Temperature | -40°C ~ 125°C | -40°C ~ 125°C |
| Mounting Type | - | Surface Mount |
| Number of Bits | 24 | - |
| Number of Inputs | 2, 4 | - |
| Input Type | Differential, Single Ended | - |
| Configuration | MUX-PGA-ADC | - |
| Number of A/D Converters | 1 | - |
| Architecture | Sigma-Delta | - |
| Reference Type | External, Internal, Supply | - |
| Voltage - Supply, Analog | 2.3V ~ 5.5V, ±2.5 | - |
| Voltage - Supply, Digital | 2.3V ~ 5.5V | - |
| Features | PGA, Temperature Sensor | - |
The ADS1220IPW is a 24-bit, 4-channel delta-sigma analog-to-digital converter (ADC) with an integrated programmable gain amplifier (PGA), voltage reference, and SPI interface, designed for precision sensor measurement. The ADS1203IPWR is a 16-bit, single-channel delta-sigma modulator that outputs a 1-bit data stream for isolated or FPGA-based signal processing, without an integrated PGA or reference. They serve different signal-chain architectures and are not functionally equivalent.
No. The ADS1220IPW is supplied in a 16-pin TSSOP (PW) package, while the ADS1203IPWR is supplied in a 16-pin TSSOP (PW) package as well, but the pin functions and internal architecture differ significantly. The ADS1220IPW provides SPI, analog inputs, reference pins, and PGA-related connections, whereas the ADS1203IPWR provides modulator clock, data output, and supply pins. Pin-to-pin substitution is not supported.
No. The ADS1220IPW is a complete ADC with digital SPI output and integrated signal conditioning, while the ADS1203IPWR is a delta-sigma modulator requiring an external digital filter (e.g., in an FPGA or DSP) to reconstruct the conversion result. The output format, clocking requirements, and external component needs differ, so a direct replacement is not possible without redesigning the digital interface and signal chain.
The ADS1220IPW offers up to 24-bit resolution with programmable data rates from 5 SPS to 2 kSPS, depending on filter settings. The ADS1203IPWR is a 16-bit delta-sigma modulator with a nominal clock frequency of up to 20 MHz and an output data rate determined by the external digital filter and modulator clock. The two devices are specified under different resolution and rate definitions and should not be compared directly without accounting for the external filter in the ADS1203IPWR system.
The ADS1203IPWR is typically preferred for isolated measurement systems because its 1-bit modulator output can be transmitted across an isolation barrier (e.g., via a digital isolator) and reconstructed by a digital filter on the isolated or non-isolated side. The ADS1220IPW integrates the digital filter and SPI interface on-chip, so isolation would require isolating the entire SPI bus and associated signals, which is generally more complex.
No. The ADS1220IPW includes an integrated programmable gain amplifier (PGA) with selectable gains of 1, 2, 4, 8, 16, 32, 64, and 128 V/V, allowing direct connection of low-level sensors. The ADS1203IPWR does not include a PGA; any gain or signal conditioning must be implemented externally before the modulator input.
The ADS1220IPW operates from an analog supply (AVDD) of 2.3 V to 5.5 V and a digital supply (DVDD) of 2.3 V to 5.5 V. The ADS1203IPWR operates from a single 5 V supply (4.5 V to 5.5 V) for both analog and digital sections. Designs migrating between the two must verify supply rail compatibility and decoupling requirements against the respective datasheets.
Yes. Texas Instruments provides the ADS1220EVM for the ADS1220IPW and the ADS1203EVM for the ADS1203IPWR, each with documentation, schematics, and software support. These evaluation modules allow direct bench comparison of noise performance, interface behavior, and signal-chain requirements under verified manufacturer conditions.