ADS1222IPWR
텍사스 인스트루먼트(주)
- Lifecycle
- Active
- Stock
- 3095 PCS
- Package
- TSSOP-14
- Series
- 데이터 수집 - 아날로그 변환기(ADC)
ADS1222IPWR과 ADS1203IPWR에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.
Replacement verdict
The ADS1222IPWR and ADS1203IPWR are not drop-in replacements for one another. Although both are 24-bit delta-sigma analog-to-digital converters in a TSSOP-16 package, they differ fundamentally in resolution architecture, output interface, channel configuration, and intended application domain, so a direct substitution is not feasible without a full system redesign.
텍사스 인스트루먼트(주)
텍사스 인스트루먼트(주)
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS1222IPWR | ADS1203IPWR | Why it matters |
|---|---|---|---|
| Resolution (bits) | 24 | 16 | Higher resolution enables finer measurement of small signal changes; a 24-bit ADC resolves much smaller increments than a 16-bit device. |
| Architecture | Delta-Sigma (24-bit ADC) | Delta-Sigma Modulator | The ADS1222 is a complete ADC with digital output, while the ADS1203 is a modulator requiring external digital filtering, affecting system design and interface complexity. |
| Output Interface | SPI-compatible serial | 1-bit modulator bitstream | Different output formats determine what downstream circuitry (microcontroller or digital filter) is needed to obtain usable data. |
| Input Channels | 2 differential | 1 differential | Channel count affects how many signals can be measured without external multiplexing. |
| Data Rate / Sample Rate | Up to 2 kSPS | Up to 40 kSPS (modulator clock dependent) | Sample rate determines the bandwidth of signals that can be captured and the tradeoff between speed and noise performance. |
| Supply Voltage | 2.7 V to 5.5 V | 4.5 V to 5.5 V | Supply range affects compatibility with low-voltage logic and battery-powered systems; the ADS1222 supports lower supply voltages. |
| Package | TSSOP-16 | TSSOP-16 | Package footprint determines PCB layout compatibility; identical packages allow drop-in replacement on the same board. |
| Internal PGA | Yes (gain up to 128) | No | An internal programmable gain amplifier allows direct connection of low-level sensors without external amplification, simplifying the signal chain. |
| Operating Temperature Range | -40°C to +85°C | -40°C to +85°C | Temperature range indicates suitability for industrial and harsh-environment applications. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS1222IPWR | ADS1203IPWR |
|---|---|---|
| Supplier | - | Texas Instruments,Rochester Electronics, LLC |
| Part Status | Active | Obsolete |
| Type | - | Modulator |
| Number of Channels | - | 1 |
| Resolution(Bits) | - | 16 b |
| Sampling Rate(Per Second) | 240 | 40k |
| Data Interface | SPI | Serial |
| Voltage Supply Source | - | Single Supply |
| Voltage - Supply | - | 4.75V ~ 5.25V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 125°C |
| Mounting Type | - | Surface Mount |
| Number of Bits | 24 | - |
| Number of Inputs | 2 | - |
| Input Type | Differential, Single Ended | - |
| Configuration | MUX-ADC | - |
| Number of A/D Converters | 1 | - |
| Architecture | Sigma-Delta | - |
| Reference Type | External | - |
| Voltage - Supply, Analog | 2.7V ~ 5.5V | - |
| Voltage - Supply, Digital | 2.7V ~ 5.5V | - |
| Features | Temperature Sensor | - |
The ADS1222IPWR is a 24-bit delta-sigma analog-to-digital converter with a two-channel differential input multiplexer, internal oscillator, and a programmable gain amplifier, communicating via a simple two-wire serial interface. The ADS1203IPWR is a 16-bit delta-sigma modulator that outputs a single-bit data stream for use with external digital filters, typically in isolated or high-speed current-sensing applications. They differ fundamentally in resolution, output format, and intended signal chain architecture.
No. Both devices are offered in a TSSOP-16 package (PW), but their pin functions and internal architectures differ. The ADS1222IPWR provides a complete ADC with serial data output, while the ADS1203IPWR provides a modulator data stream and clock output. Pin assignments and external component requirements are not interchangeable, so PCB layouts must be designed specifically for each device.
The ADS1222IPWR provides 24-bit resolution with a serial peripheral interface-compatible two-wire output for direct digital conversion results. The ADS1203IPWR is a 16-bit delta-sigma modulator that outputs a single-bit pulse-density-modulated data stream, requiring an external digital filter (such as an FPGA or DSP sinc filter) to reconstruct the digital word. The effective resolution of the ADS1203IPWR depends on the external filter implementation and oversampling ratio.
No. The ADS1203IPWR does not provide a complete ADC output; it requires an external digital filter to convert its single-bit modulator stream into a usable digital value. Additionally, the pin functions, supply requirements, and interface signals differ from the ADS1222IPWR. A direct substitution is not possible without redesigning the digital signal processing chain and PCB layout.
The ADS1222IPWR operates from a single analog supply of 2.7 V to 5.5 V, with a separate digital supply of 2.7 V to 5.5 V. The ADS1203IPWR operates from a single 5 V analog supply and a 2.7 V to 5.5 V digital supply. Designers should verify exact supply ranges and decoupling requirements against the respective manufacturer datasheets before finalizing power architectures.
The ADS1203IPWR is specifically designed for isolated current-sensing and power-monitoring applications because its single-bit modulator output can be easily galvanically isolated using digital isolators before external filtering. The ADS1222IPWR, with its complete ADC and serial interface, is more suited to direct sensor measurement and general-purpose data acquisition where isolation is not a primary requirement.
No. The ADS1222IPWR uses a two-wire serial interface for reading conversion results and configuring the device. The ADS1203IPWR outputs a single-bit modulator data stream along with a clock signal, and does not implement a command-based serial protocol. Interfacing the ADS1203IPWR requires a digital filter or modulator-specific receiver, not a standard SPI or I2C host interface.