ADS1251U/2K5 vs ADS1201UG4

ADS1251U/2K5과 ADS1201UG4에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The ADS1251U/2K5 and ADS1201UG4 are not drop-in replacements for each other. Although both are 24-bit delta-sigma analog-to-digital converters, they differ in resolution architecture, output interface, package footprint, and reference/supply configuration, so a direct board-level substitution is not possible without redesign.

Different output interface Different package footprint Different input architecture Different supply configuration

Parts at a glance

Part A

ADS1251U/2K5

텍사스 인스트루먼트(주)

Lifecycle
Active
Stock
4208 PCS
Package
SOIC-8
Series
데이터 수집 - 아날로그 변환기(ADC)
Part B

ADS1201UG4

텍사스 인스트루먼트(주)

Lifecycle
Active
Stock
6830 PCS
Package
SOIC-16
Series
데이터 수집 - ADC DAC- 전용

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADS1251U/2K5 ADS1201UG4 Why it matters
Resolution (bits) 24 24 Both are 24-bit delta-sigma converters, so resolution alone does not distinguish them for substitutability.
Architecture Delta-Sigma ADC (voltage input) Delta-Sigma Modulator (1-bit output) The ADS1251 is a complete ADC with digital output; the ADS1201 is a modulator requiring external digital filtering, so they are not drop-in substitutes.
Output Interface Serial (SPI-compatible) 1-bit serial bitstream Different output formats require different downstream processing, affecting system-level interchangeability.
Input Type Differential voltage Differential voltage Both accept differential voltage inputs, which is relevant for sensor signal conditioning compatibility.
Data Rate / Sample Rate Up to ~20 kSPS Up to ~40 kSPS (modulator clock dependent) Sample rate determines achievable bandwidth and affects suitability for higher-speed measurement applications.
Supply Voltage 5 V analog supply 5 V analog supply Matching supply requirements simplifies power-rail design when considering substitution.
Package SOIC-8 SOIC-16 Different package footprints and pin counts prevent direct board-level replacement without layout changes.
Operating Temperature Range -40°C to +85°C -40°C to +85°C Identical temperature ratings mean both suit the same industrial environmental conditions.
Internal PGA / Gain No internal PGA No internal PGA Neither integrates programmable gain, so external amplification is needed for small signals in both cases.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADS1251U/2K5 ADS1201UG4
Supplier - Texas Instruments
Part Status Active Discontinued at Digi-Key
Type - Modulator
Number of Channels - 1
Resolution(Bits) - 24 b
Sampling Rate(Per Second) 20k 1k
Data Interface SPI Serial
Voltage Supply Source - Analog and Digital
Voltage - Supply - 4.75V ~ 5.25V
Operating Temperature -40°C ~ 85°C -40°C ~ 85°C
Mounting Type - Surface Mount
Number of Bits 24 -
Number of Inputs 1 -
Input Type Differential -
Configuration ADC -
Number of A/D Converters 1 -
Architecture Sigma-Delta -
Reference Type External -
Voltage - Supply, Analog 5V -
Voltage - Supply, Digital 5V -

Frequently asked questions

What are the primary functional differences between the ADS1251U/2K5 and the ADS1201UG4?

The ADS1251U/2K5 is a 24-bit delta-sigma analog-to-digital converter with a fixed data rate of 20 kSPS, designed for high-resolution DC and low-frequency measurement. The ADS1201UG4 is a 24-bit delta-sigma modulator that outputs a 1-bit serial bitstream at a 10 MHz clock, intended for isolated signal conditioning and applications requiring digital filtering in an external FPGA or DSP. The ADS1251 integrates the digital filter and provides a complete ADC solution, while the ADS1201 provides only the modulator stage.

Are the ADS1251U/2K5 and ADS1201UG4 pin-compatible or package-compatible?

No. The ADS1251U/2K5 is supplied in an 8-pin SOIC package (U suffix), while the ADS1201UG4 is supplied in a 16-pin SOIC package (UG4 suffix). The pin counts, pin functions, and PCB land patterns differ, so these devices are not drop-in replacements for one another.

What are the resolution and output data rate specifications for each device?

The ADS1251U/2K5 provides 24-bit resolution with a fixed 20 kSPS output data rate and an integrated digital filter. The ADS1201UG4 provides 24-bit modulator resolution with a 1-bit serial output stream; its effective output word rate depends on the external digital filter and the applied modulator clock (up to 10 MHz), not on an internally fixed data rate.

Which device is better suited for isolated measurement applications?

The ADS1201UG4 is specifically intended for isolated signal conditioning because its 1-bit modulator output can be passed through a single digital isolator, with filtering performed on the isolated or non-isolated side by an FPGA or DSP. The ADS1251U/2K5 provides a parallel or serial word output from an integrated ADC and is not optimized for single-channel digital isolation architectures.

Do both devices support the same supply voltage and reference requirements?

Both devices operate from a single 5 V analog supply and support an external reference voltage. However, the ADS1251U/2K5 integrates the digital filter and clock generation circuitry, while the ADS1201UG4 requires an external modulator clock (up to 10 MHz) and external digital filtering. Designers must verify reference drive requirements and clock source availability against the respective datasheets.

Can the ADS1201UG4 replace the ADS1251U/2K5 in an existing design without firmware changes?

No. The ADS1251U/2K5 outputs a filtered digital word at 20 kSPS, whereas the ADS1201UG4 outputs an unfiltered 1-bit bitstream that requires an external digital filter (typically in an FPGA or DSP) to produce a usable conversion result. Replacing one with the other requires changes to the digital interface, clocking, and signal processing chain.

What are the typical target applications for each device?

The ADS1251U/2K5 is typically used in high-resolution industrial measurement, weigh scales, and low-frequency data acquisition where an integrated ADC with a fixed 20 kSPS rate is sufficient. The ADS1201UG4 is typically used in isolated current and voltage sensing, motor control feedback, and power measurement systems where the modulator output is digitally isolated and filtered externally.