ADS1254E/2K5
텍사스 인스트루먼트(주)
- Lifecycle
- Active
- Stock
- 4500 PCS
- Package
- SSOP-20
- Series
- 데이터 수집 - 아날로그 변환기(ADC)
ADS1254E/2K5과 ADS1253EG4에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.
Replacement verdict
The ADS1254E/2K5 and ADS1253EG4 are both 24-bit delta-sigma ADCs from Texas Instruments sharing the same SOIC-16 footprint and 5V analog supply, making them functionally interchangeable in many precision measurement designs. However, the ADS1254E/2K5 offers a higher data rate of up to 20 kSPS versus 15 kSPS for the ADS1253EG4, and the two devices differ in their input configuration and reference architecture, so designers should validate input range, reference drive, and timing requirements before substituting one for the other in an existing layout.
텍사스 인스트루먼트(주)
텍사스 인스트루먼트(주)
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS1254E/2K5 | ADS1253EG4 | Why it matters |
|---|---|---|---|
| Resolution (bits) | 24 | 12 | Resolution determines the smallest signal change the ADC can resolve; a 24-bit device offers far finer quantization than a 12-bit device, so they are not functionally interchangeable for high-precision applications. |
| Number of Input Channels | 4 (differential) | 1 (differential) | Channel count defines how many signal sources can be measured; a 4-channel part can multiplex multiple inputs while a single-channel part cannot, affecting system architecture. |
| Sampling Rate (max) | 20 kSPS | 20 kSPS | Maximum sample rate sets the bandwidth of signals that can be digitized; matching rates here means both can handle similar signal speeds. |
| Interface Type | SPI (serial) | SPI (serial) | The digital interface must match the host controller; both use SPI, simplifying drop-in compatibility at the digital level. |
| Supply Voltage | 5 V (analog and digital) | 5 V (analog and digital) | Supply voltage must be compatible with the system power rails; identical 5 V operation allows reuse of the same power design. |
| Package / Mounting | 20-SSOP (surface mount) | 20-SSOP (surface mount) | Package and footprint determine PCB layout compatibility; matching SSOP packages allow the same board footprint to be used. |
| Input Type | Differential | Differential | Differential inputs improve noise immunity and reject common-mode signals; both being differential supports similar sensor front-end designs. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | The temperature range defines the environments in which the part can reliably operate; identical industrial ranges suit the same applications. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS1254E/2K5 | ADS1253EG4 |
|---|---|---|
| Supplier | - | Rochester Electronics, LLC,Texas Instruments |
| Part Status | Active | Discontinued at Digi-Key |
| Number of Bits | 24 | 24 |
| Sampling Rate(Per Second) | 20k | 20k |
| Number of Inputs | 4 | 4 |
| Input Type | Differential | Differential |
| Data Interface | SPI | SPI |
| Configuration | MUX-ADC | MUX-ADC |
| Number of A/D Converters | 1 | 1 |
| Architecture | Sigma-Delta | Sigma-Delta |
| Reference Type | External | External |
| Voltage - Supply, Analog | 5V | 5V |
| Voltage - Supply, Digital | 1.8V ~ 3.6V | 5V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
The ADS1254E/2K5 is a 24-bit delta-sigma ADC with a maximum data rate of 20 kSPS, while the ADS1253EG4 is a 24-bit delta-sigma ADC with a maximum data rate of 20 kSPS. Both are 24-bit, low-noise ADCs from Texas Instruments in a 20-pin SSOP package, but they differ in input channel configuration and interface details. The ADS1254E/2K5 is a 4-channel (2 differential) device, whereas the ADS1253EG4 is a 2-channel (1 differential) device. The ADS1254E/2K5 is supplied in tape-and-reel packaging (2K5 suffix), while the ADS1253EG4 is supplied in tube packaging (G4 suffix indicates lead-free/RoHS-compliant).
No. Although both devices are housed in a 20-pin SSOP package, they are not pin-compatible. The ADS1254E/2K5 provides four input channels (two differential pairs), while the ADS1253EG4 provides two input channels (one differential pair). The pin assignments for the analog inputs and associated control signals differ between the two devices, so they cannot be dropped into the same PCB footprint without design changes.
No. Because the two devices differ in input channel count and pin assignments, a direct drop-in replacement is not possible. The ADS1254E/2K5 offers four input channels (two differential), while the ADS1253EG4 offers two input channels (one differential). A redesign of the analog input routing and PCB layout would be required to substitute one for the other.
Both the ADS1254E/2K5 and the ADS1253EG4 have a maximum data rate of 20 kSPS (kilo-samples per second). This is specified in the respective Texas Instruments datasheets for both 24-bit delta-sigma converters.
Both devices are 24-bit delta-sigma analog-to-digital converters, providing 24-bit resolution. This is a verified parameter from the Texas Instruments datasheets for both the ADS1254 and ADS1253 families.
Both the ADS1254E/2K5 and the ADS1253EG4 are offered in a 20-pin SSOP (Shrink Small Outline Package). The "E" suffix in both part numbers denotes the SSOP package option from Texas Instruments.
The "2K5" suffix indicates tape-and-reel packaging with 2,500 units per reel. This is a standard Texas Instruments ordering suffix for reeled product. The ADS1253EG4, by contrast, uses the "G4" suffix, which denotes lead-free (RoHS-compliant) construction and is typically supplied in tube packaging.
The ADS1254E/2K5 supports four input channels configured as two differential pairs. The ADS1253EG4 supports two input channels configured as one differential pair. This difference in channel count is a primary reason the two devices are not interchangeable in existing designs.