ADS1271IBPWR
텍사스 인스트루먼트(주)
- Lifecycle
- Active
- Stock
- 6728 PCS
- Package
- TSSOP-16
- Series
- 데이터 수집 - 아날로그 변환기(ADC)
ADS1271IBPWR과 ADS1282HIPW에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.
Replacement verdict
The ADS1271IBPWR and ADS1282HIPW are both 24-bit delta-sigma ADCs in a TSSOP-28 package, but they differ fundamentally in resolution architecture, input configuration, and target application. The ADS1271IBPWR is a single-channel wide-bandwidth converter with a fixed data rate up to 105 kSPS, while the ADS1282HIPW is a dual-channel high-resolution seismic-grade converter with an integrated PGA and data rates up to 4 kSPS. These differences in channel count, programmable gain, and output data rate make the two devices non-interchangeable in existing designs without significant rework.
텍사스 인스트루먼트(주)
텍사스 인스트루먼트(주)
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS1271IBPWR | ADS1282HIPW | Why it matters |
|---|---|---|---|
| Resolution (bits) | 24 | 31 | Higher resolution enables finer signal detail and lower quantization noise, which is critical for precision measurement and seismic/energy-exploration applications. |
| Maximum Sample Rate (SPS) | 105k | 4k | Sample rate determines the bandwidth of signals the ADC can capture; the ADS1271 suits wider-bandwidth data acquisition while the ADS1282 targets low-frequency high-precision sensing. |
| Architecture | Delta-Sigma | Delta-Sigma | Both use delta-sigma conversion, but their differing modulator designs yield very different noise/bandwidth tradeoffs relevant to substitutability. |
| Number of Input Channels | 1 (differential) | 2 (differential, multiplexed) | Channel count affects how many sensors can be interfaced; the ADS1282 supports two differential inputs while the ADS1271 is single-channel. |
| Supply Voltage (Analog) | 5 V | 5 V (analog), 3.3 V (digital) | Supply requirements determine power-rail compatibility and whether the part can drop into an existing board design without level shifting. |
| Interface Type | SPI (serial) | SPI (serial) | Both use SPI, but timing and register maps differ, so firmware and host-controller compatibility must be verified for substitution. |
| Package | TSSOP-16 (PW) | TSSOP-28 (PW) | Different package footprints and pin counts mean the parts are not drop-in replacements and require PCB layout changes. |
| Operating Temperature Range | -40°C to +105°C | -40°C to +85°C | Temperature range affects suitability for harsh environments; the ADS1271 offers a wider high-temperature margin. |
| Typical Power Consumption | ~70 mW | ~30 mW | Power consumption impacts thermal budget and battery life; the ADS1282 is lower power, favoring portable or energy-constrained designs. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS1271IBPWR | ADS1282HIPW |
|---|---|---|
| Supplier | - | Rochester Electronics, LLC,Texas Instruments |
| Part Status | Active | Active |
| Number of Bits | 24 | - |
| Sampling Rate(Per Second) | 105k | - |
| Number of Inputs | 1 | - |
| Input Type | Differential | - |
| Data Interface | SPI | - |
| Configuration | ADC | - |
| Number of A/D Converters | 1 | - |
| Architecture | Sigma-Delta | - |
| Reference Type | External | - |
| Voltage - Supply, Analog | 5V | - |
| Voltage - Supply, Digital | 1.65V ~ 3.6V | - |
| Operating Temperature | -40°C ~ 105°C | - |
The ADS1271IBPWR is a 24-bit, single-channel delta-sigma ADC with a maximum data rate of 105 kSPS, while the ADS1282HIPW is a 31-bit, single-channel delta-sigma ADC with a maximum data rate of 4 kSPS. The ADS1282HIPW integrates a programmable gain amplifier (PGA) and is designed for high-resolution seismic and energy exploration applications, whereas the ADS1271IBPWR is a wide-bandwidth industrial ADC without an integrated PGA.
No. The ADS1271IBPWR is supplied in a 20-pin TSSOP (PW) package, and the ADS1282HIPW is supplied in a 28-pin TSSOP (PW) package. The different pin counts and pin functions prevent direct PCB footprint interchangeability.
Both devices provide a serial peripheral interface (SPI)-compatible serial output, but the ADS1271IBPWR supports both SPI and frame-sync modes, while the ADS1282HIPW provides a flexible SPI-compatible interface with additional synchronization and calibration command support. The command set and register maps differ between the two devices.
The ADS1282HIPW provides 31-bit resolution and is specified for low-noise seismic-grade performance, making it better suited for high-resolution precision measurement. The ADS1271IBPWR provides 24-bit resolution and is intended for wide-bandwidth industrial signal acquisition.
No. The ADS1271IBPWR operates from a 5 V analog supply (AVDD), while the ADS1282HIPW operates from a 5 V analog supply as well but also requires a separate 3.3 V digital supply (DVDD) and supports a bipolar analog supply configuration. Designers must verify the supply scheme against each datasheet before substitution.
The ADS1271IBPWR is typically used in industrial measurement, vibration analysis, and wide-bandwidth data acquisition systems. The ADS1282HIPW is typically used in seismic data acquisition, energy exploration, and high-resolution precision instrumentation requiring an integrated PGA.
Both the ADS1271IBPWR and ADS1282HIPW are specified for the industrial temperature range of -40°C to +85°C, so temperature range alone does not differentiate them for substitution purposes.