ADS7883SBDBVR
텍사스 인스트루먼트(주)
- Lifecycle
- Active
- Stock
- 1401 PCS
- Package
- SOT-23-6
- Series
- 데이터 수집 - 아날로그 변환기(ADC)
ADS7883SBDBVR과 ADS7887SDCKR에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.
Replacement verdict
The ADS7883SBDBVR is a viable functional replacement candidate for the ADS7887SDCKR, sharing the same 12-bit SAR architecture, 1 MSPS throughput, and 2.7 V to 5.25 V supply range, though the differing package and interface configuration require board-level validation before substitution.
텍사스 인스트루먼트(주)
텍사스 인스트루먼트(주)
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS7887SDCKR | ADS7883SBDBVR | Why it matters |
|---|---|---|---|
| Resolution | 10 bit | 12 bit | Resolution determines the smallest analog voltage change the ADC can distinguish; a 12-bit part offers 4x finer quantization than a 10-bit part, affecting measurement accuracy. |
| Sampling Rate | 1.25 MSPS | 3 MSPS | Maximum throughput limits the bandwidth of signals that can be digitized; the higher-rate part supports faster acquisition and wider analog input bandwidth. |
| Input Type | Single-ended | Pseudo-differential | Single-ended inputs measure against ground, while pseudo-differential inputs measure against a reference pin, improving rejection of common-mode noise and ground offsets. |
| Supply Voltage Range | 2.35 V to 5.25 V | 2.7 V to 5.25 V | The minimum supply voltage affects compatibility with low-voltage rails; the wider low-end range of one part allows operation from lower supply voltages. |
| Analog Input Voltage Range | 0 V to VDD | 0 V to VDD | Defines the span of analog signals the converter can accept; both parts use a supply-referenced full-scale range, so input scaling must match the supply. |
| Interface Type | SPI (serial) | SPI (serial) | Both use a serial SPI-compatible interface, so the host controller connection is functionally similar, though timing and frame length differ with resolution. |
| Package | SOT-23-6 (SC-70) | SOT-23-6 | Package footprint and pinout determine board layout compatibility; similar small packages ease drop-in substitution but pin functions must be verified. |
| Operating Temperature Range | -40 °C to +125 °C | -40 °C to +125 °C | The temperature range indicates suitability for industrial and automotive environments; matching ranges mean equivalent thermal robustness. |
| Power Consumption (typical) | ~13.5 mW at 5 V, 1.25 MSPS | ~18 mW at 5 V, 3 MSPS | Power draw affects thermal budget and battery life; the higher-speed part consumes more power, which must be accounted for in power-sensitive designs. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS7883SBDBVR | ADS7887SDCKR |
|---|---|---|
| Part Status | Active | Active |
| Number of Bits | 12 | 10 |
| Sampling Rate(Per Second) | 3M | 1.25M |
| Number of Inputs | 1 | 1 |
| Input Type | Single Ended | Single Ended |
| Data Interface | SPI | SPI |
| Configuration | S/H-ADC | S/H-ADC |
| Ratio - S / H: ADC | 1:1 | 1:1 |
| Number of A/D Converters | 1 | 1 |
| Architecture | SAR | SAR |
| Reference Type | Supply | Supply |
| Voltage - Supply, Analog | 2.7V ~ 5.5V | 2.35V ~ 5.25V |
| Voltage - Supply, Digital | 2.7V ~ 5.5V | 2.35V ~ 5.25V |
| Operating Temperature | -40°C ~ 125°C | -40°C ~ 125°C |
| Series | - | microPOWER™ |
The ADS7887SDCKR is a 10-bit, 1-MSPS SAR ADC in a 6-pin SC70 (DCK) package, while the ADS7883SBDBVR is a 12-bit, 3-MSPS SAR ADC in a 6-pin SOT-23 (DBV) package. The ADS7883 offers higher resolution and a faster maximum throughput, whereas the ADS7887 provides lower power consumption at a lower sample rate.
No. The ADS7887SDCKR uses the 6-pin SC70 (DCK) package and the ADS7883SBDBVR uses the 6-pin SOT-23 (DBV) package. Although both are 6-pin SAR ADC devices with similar pin functions (VDD, GND, CS, SCLK, SDO, and analog input), the package footprints and land patterns differ, so they are not drop-in replacements on the same PCB.
The ADS7887SDCKR provides 10-bit resolution with a maximum throughput of 1 MSPS. The ADS7883SBDBVR provides 12-bit resolution with a maximum throughput of 3 MSPS. Both are successive-approximation-register (SAR) analog-to-digital converters with a pseudo-differential input.
Both devices operate from a single 2.7 V to 5.25 V supply. The ADS7887SDCKR is specified for lower power operation at its 1-MSPS rate, while the ADS7883SBDBVR draws more current to support its higher 3-MSPS throughput and 12-bit resolution. Designers should consult the respective datasheets for exact supply current and power figures at the intended supply voltage and sample rate.
Both the ADS7887SDCKR and ADS7883SBDBVR feature a pseudo-differential analog input, where the input signal is applied to the positive input (IN+) and a reference-level signal is applied to the negative input (IN-). The input range is referenced to the supply voltage (VDD), and both devices use a serial interface for data output.
Both devices use a SPI-compatible serial interface with chip-select (CS), serial clock (SCLK), and serial data output (SDO) pins. This allows direct connection to most microcontrollers and DSPs. The maximum SCLK frequency differs between the two parts to support their respective throughput ratings.
Not directly. Substitution requires verifying package footprint compatibility (SC70 vs SOT-23), resolution (10-bit vs 12-bit), throughput (1 MSPS vs 3 MSPS), and timing of the serial interface. A design expecting 12-bit accuracy or 3-MSPS sampling cannot be satisfied by the ADS7887SDCKR, and the PCB land pattern must be redesigned for the different package.
The ADS7887SDCKR (10-bit, 1 MSPS) suits cost- and power-sensitive applications such as battery monitoring, portable instrumentation, and general-purpose data acquisition. The ADS7883SBDBVR (12-bit, 3 MSPS) targets higher-performance applications requiring finer resolution and faster sampling, such as motor control, power monitoring, and higher-bandwidth sensor interfaces.