ADS7955QDBTRQ1
텍사스 인스트루먼트(주)
- Lifecycle
- Active
- Stock
- 7159 PCS
- Package
- TSSOP-30
- Series
- 데이터 수집 - 아날로그 변환기(ADC)
ADS7955QDBTRQ1과 ADS7952QDBTRQ1에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.
Replacement verdict
The ADS7955QDBTRQ1 is a functional replacement candidate for the ADS7952QDBTRQ1, sharing the same package, pinout, resolution, and automotive qualification, with the primary distinction being the reduced channel count of the ADS7955. Designers must confirm that the lower channel count satisfies their system requirements before substituting.
텍사스 인스트루먼트(주)
텍사스 인스트루먼트(주)
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS7952QDBTRQ1 | ADS7955QDBTRQ1 | Why it matters |
|---|---|---|---|
| Resolution | 12 bit | 10 bit | Resolution determines the smallest analog voltage change the ADC can distinguish; a 12-bit device provides 4x finer quantization than a 10-bit device, directly affecting measurement accuracy and substitutability. |
| Number of Input Channels | 12 single-ended | 8 single-ended | The channel count defines how many analog signals can be multiplexed into the ADC; a system needing 12 inputs cannot be served by an 8-channel part without external multiplexing. |
| Sampling Rate | 1 MSPS | 1 MSPS | Maximum throughput determines the highest signal bandwidth that can be digitized; matching rates mean timing budgets remain compatible when swapping parts. |
| Supply Voltage (Analog and Digital) | 2.7 V to 5.25 V | 2.7 V to 5.25 V | Compatible supply ranges ensure the device operates within the same power rails, so no regulator or level-shifting changes are required for substitution. |
| Interface Type | SPI (serial) | SPI (serial) | The digital interface must match the host controller; an identical SPI interface allows drop-in replacement without firmware or hardware redesign. |
| Input Type | Single-ended | Single-ended | Single-ended versus differential input architecture affects signal conditioning and noise immunity; matching input types keeps the analog front-end compatible. |
| Package | TSSOP-38 (DBT) | TSSOP-38 (DBT) | An identical package and pinout enables direct board-level replacement without layout changes or rework of the PCB footprint. |
| Operating Temperature Range | -40 °C to +125 °C | -40 °C to +125 °C | The automotive-qualified temperature range must cover the application environment; matching ranges confirm both parts suit the same harsh conditions. |
| Qualification | AEC-Q100 (automotive) | AEC-Q100 (automotive) | Automotive qualification confirms reliability and quality standards for vehicle applications; both parts meeting AEC-Q100 supports use in the same automotive designs. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS7955QDBTRQ1 | ADS7952QDBTRQ1 |
|---|---|---|
| Series | Automotive, AEC-Q100 | Automotive, AEC-Q100 |
| Part Status | Active | Active |
| Number of Bits | 10 | 12 |
| Sampling Rate(Per Second) | 1M | 1M |
| Number of Inputs | 8 | 12 |
| Input Type | Single Ended | Single Ended |
| Data Interface | SPI | SPI |
| Configuration | MUX-PGA-S/H-ADC | MUX-PGA-S/H-ADC |
| Ratio - S / H: ADC | 1:1 | 1:1 |
| Number of A/D Converters | 1 | 1 |
| Architecture | SAR | SAR |
| Reference Type | External | External |
| Voltage - Supply, Analog | 2.7V ~ 5.25V | 2.7V ~ 5.25V |
| Voltage - Supply, Digital | 1.7V ~ 5.25V | 1.7V ~ 5.25V |
| Features | PGA | PGA |
| Operating Temperature | -40°C ~ 125°C | -40°C ~ 125°C |
Both are automotive-qualified, 12-bit successive-approximation ADCs from Texas Instruments in a 38-pin TSSOP (DBT) package with a serial SPI interface. The primary difference is channel count and sampling rate: the ADS7952QDBTRQ1 provides 12 single-ended input channels with a maximum throughput of 1 MSPS, while the ADS7955QDBTRQ1 provides 8 single-ended input channels with a maximum throughput of 1 MSPS. Both support a 2.7 V to 5.25 V analog supply range and are AEC-Q100 qualified.
Both devices are offered in the same 38-pin TSSOP (DBT) package, but they are not functionally interchangeable without design review because the channel count differs (12 vs 8). Pin functions and the multiplexer configuration must be verified against the respective datasheets before any substitution is considered.
Both the ADS7952QDBTRQ1 and ADS7955QDBTRQ1 are 12-bit successive-approximation register (SAR) analog-to-digital converters with an integrated multiplexer, sample-and-hold, and SPI-compatible serial interface.
The ADS7952QDBTRQ1 supports a maximum throughput of 1 MSPS, and the ADS7955QDBTRQ1 also supports a maximum throughput of 1 MSPS. The sampling rate is identical; the differentiating factor is the number of input channels.
Both devices operate from an analog supply (AVDD) of 2.7 V to 5.25 V and a digital supply (DVDD) of 1.7 V to 5.25 V, allowing flexible interfacing with low-voltage logic and 5 V systems.
Yes. Both the ADS7952QDBTRQ1 and ADS7955QDBTRQ1 carry the Q1 suffix and are AEC-Q100 qualified, making them suitable for automotive and other harsh-environment applications.
Both devices use a SPI-compatible serial interface for configuration and data readout, supporting daisy-chain operation and multiple device configurations on a shared bus.
Not directly. Although both share the same package and 12-bit, 1 MSPS SAR architecture, the ADS7955QDBTRQ1 provides only 8 input channels versus 12 on the ADS7952QDBTRQ1. Any replacement requires verifying channel mapping, multiplexer programming, and PCB routing against the target datasheet.