ADS8555SPMR vs ADS8555SPM

ADS8555SPMR과 ADS8555SPM에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The ADS8555SPMR and ADS8555SPM are functionally equivalent six-channel simultaneous-sampling SAR ADCs sharing identical core specifications, differing only in reel versus tray packaging. The ADS8555SPMR is a valid functional replacement for the ADS8555SPM, with the same electrical performance and footprint compatibility.

Resolution and Channel Count High match
Package and Footprint High match
Supply Voltage and Interface High match
Packaging Format Validation required

Parts at a glance

Part A

ADS8555SPMR

텍사스 인스트루먼트(주)

Lifecycle
Active
Stock
2733 PCS
Package
LQFP-64
Series
데이터 수집 - 아날로그 변환기(ADC)
Part B

ADS8555SPM

텍사스 인스트루먼트(주)

Lifecycle
Active
Stock
8068 PCS
Package
LQFP-64
Series
데이터 수집 - 아날로그 변환기(ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADS8555SPMR ADS8555SPM Why it matters
Package / Case LQFP-64 (10x10 mm) LQFP-64 (10x10 mm) The package footprint and pinout determine whether the part can be dropped onto an existing PCB without layout changes.
Packaging / Ordering Format Tape & Reel (R suffix) Tray / Tube (no R suffix) The reel vs. tray distinction affects assembly line handling and is the primary difference between these two orderable part numbers.
Resolution 16 bits 16 bits Resolution defines the smallest measurable signal step and must match for functional equivalence.
Number of ADC Channels 6 (simultaneous sampling) 6 (simultaneous sampling) Channel count and simultaneous sampling capability determine suitability for multi-phase or multi-axis measurement systems.
Sampling Rate 630 kSPS 630 kSPS Maximum throughput must meet the signal bandwidth requirements of the application.
Supply Voltage 5 V analog, 2.7–5.5 V digital 5 V analog, 2.7–5.5 V digital Supply rails must be compatible with the existing power architecture for direct substitution.
Interface Parallel / Serial (SPI-compatible) Parallel / Serial (SPI-compatible) The digital interface must match the host controller to avoid firmware or hardware redesign.
Operating Temperature Range -40 °C to +125 °C -40 °C to +125 °C The temperature range must cover the target environment for reliable operation.
Input Type Bipolar, pseudo-differential Bipolar, pseudo-differential Input configuration determines signal conditioning requirements and measurement accuracy.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADS8555SPMR ADS8555SPM
Supplier - Rochester Electronics, LLC,Texas Instruments
Part Status Active Active
Number of Bits 16 16
Sampling Rate(Per Second) 630k 630k
Number of Inputs 6 6
Input Type Single Ended Single Ended
Data Interface SPI, Parallel SPI, Parallel
Configuration S/H-ADC S/H-ADC
Ratio - S / H: ADC 1:1 1:1
Number of A/D Converters 1 1
Architecture SAR SAR
Reference Type External, Internal External, Internal
Voltage - Supply, Analog 5V 5V
Voltage - Supply, Digital 2.7V ~ 3.6V, 5V 2.7V ~ 3.6V, 5V
Features Simultaneous Sampling Simultaneous Sampling
Operating Temperature -40°C ~ 125°C -40°C ~ 125°C

Frequently asked questions

What is the difference between the ADS8555SPMR and the ADS8555SPM?

Both devices are the same ADS8555 six-channel, 16-bit, simultaneous-sampling SAR ADC from Texas Instruments. The difference is the ordering suffix: the ADS8555SPM is supplied in tube/rail packaging, while the ADS8555SPMR is the tape-and-reel variant (R suffix). The electrical specifications, die, and LQFP-64 package are identical.

Are the ADS8555SPMR and ADS8555SPM electrically and functionally identical?

Yes. Both orderable part numbers share the same datasheet, silicon revision, and functional block diagram. They differ only in shipping media (tape-and-reel vs tube), so AC/DC performance, pinout, and register behavior are the same.

What package do the ADS8555SPMR and ADS8555SPM use?

Both parts are offered in a 64-pin LQFP (PM package) with a 10 mm × 10 mm body and 0.5 mm lead pitch, as specified in the Texas Instruments ADS8555 datasheet.

Can the ADS8555SPMR be used as a drop-in replacement for the ADS8555SPM?

Yes, from an electrical and footprint standpoint, since both are the same die in the same 64-pin LQFP package. The only practical consideration is the assembly process: tape-and-reel (R) suits automated pick-and-place lines, while tube (non-R) suits low-volume or manual handling.

What are the key performance specifications shared by the ADS8555SPMR and ADS8555SPM?

Per the TI datasheet, both are 16-bit, 6-channel simultaneous-sampling SAR ADCs with up to 630 kSPS per channel, a ±10 V or ±5 V input range option, an integrated reference, and a parallel or serial interface. They operate from a 5 V analog supply with a 3.3 V or 5 V digital supply.

Which applications are the ADS8555SPMR and ADS8555SPM intended for?

Both are intended for multi-axis motor control, power quality monitoring, protective relays, and industrial data acquisition where simultaneous sampling of multiple channels is required, as described in the TI product documentation.

How should the ADS8555SPMR and ADS8555SPM be stored and handled?

Both are moisture-sensitive LQFP devices and should be handled per the moisture sensitivity level (MSL) stated on the TI package label and datasheet. Tape-and-reel (R) parts are typically supplied in reels for automated assembly, while tube parts require the same ESD and MSL precautions.