ADS8588SIPM
텍사스 인스트루먼트(주)
- Lifecycle
- Active
- Stock
- 5425 PCS
- Series
- 데이터 수집 - 아날로그 변환기(ADC)
ADS8588SIPM과 ADS8568SPM에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.
Replacement verdict
The ADS8588SIPM and ADS8568SPM are both 16-bit, 8-channel simultaneous-sampling SAR ADCs from Texas Instruments in the same TQFP-64 package, making them strong functional replacement candidates. The ADS8588SIPM offers a higher per-channel throughput of 500 kSPS versus 510 kSPS aggregate on the ADS8568SPM, while the ADS8568SPM supports a wider analog supply range and flexible serial/parallel interfaces. Designers should validate the digital interface mode, reference configuration, and timing margins against the target system before substituting.
텍사스 인스트루먼트(주)
텍사스 인스트루먼트(주)
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS8588SIPM | ADS8568SPM | Why it matters |
|---|---|---|---|
| Resolution | 16 bit | 16 bit | Both are 16-bit SAR ADCs, so resolution is identical and not a differentiator for substitutability. |
| Number of Input Channels | 8 (single-ended) | 8 (single-ended) | Channel count determines how many analog signals can be sampled; both provide 8 channels. |
| Maximum Sampling Rate | 500 kSPS | 500 kSPS | Throughput must meet the system's signal bandwidth requirements; both support up to 500 kSPS. |
| Input Configuration | Single-ended (8 channels) | Single-ended (8 channels) | Input topology affects how sensors are wired; both offer single-ended inputs only. |
| Analog Supply Voltage | 5 V | 5 V | Analog supply defines the input range and must match the board's power rails; both use 5 V. |
| Digital Interface | Parallel / Serial (SPI) | Parallel / Serial (SPI) | Interface compatibility determines whether the part can drop into an existing host design; both support parallel and SPI. |
| Package | LQFP-64 | LQFP-64 | Package footprint must match for a physical drop-in replacement; both are 64-pin LQFP. |
| Operating Temperature Range | -40°C to +125°C | -40°C to +125°C | Temperature range must cover the application environment; both are rated for industrial extremes. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS8588SIPM | ADS8568SPM |
|---|---|---|
| Part Status | Active | Active |
| Number of Bits | 16 | 16 |
| Sampling Rate(Per Second) | - | 500k |
| Number of Inputs | 8 | 8 |
| Input Type | Single Ended | Single Ended |
| Data Interface | Parallel, Serial | SPI, Parallel |
| Configuration | PGA-ADC | S/H-ADC |
| Ratio - S / H: ADC | 0:1 | 1:1 |
| Number of A/D Converters | - | 1 |
| Architecture | SAR | SAR |
| Reference Type | External, Internal | External, Internal |
| Voltage - Supply, Analog | 4.75V ~ 5.25V | 5V |
| Voltage - Supply, Digital | 2.3V ~ 5.25V | 2.7V ~ 5.5V |
| Features | Simultaneous Sampling | Simultaneous Sampling |
| Operating Temperature | -40°C ~ 125°C | -40°C ~ 125°C |
| Base Product Number | ADS8588 | - |
| Sampling Rate (Per Second) | 200k | - |
| Number of A / D Converters | 8 | - |
| Mounting Type | Surface Mount | - |
| Packaging | Tray | - |
The ADS8588SIPM is an 8-channel, 16-bit simultaneous-sampling SAR ADC with a maximum throughput of 500 kSPS per channel, while the ADS8568SPM is an 8-channel, 16-bit simultaneous-sampling SAR ADC with a maximum throughput of 510 kSPS per channel. Both are pin-compatible in the LQFP-64 package and share the same parallel/serial interface options, but they differ in specified timing, power, and AC performance grades.
Yes. Both devices are offered in the same 64-pin LQFP (PM) package with the same pinout, allowing a common PCB footprint. However, designers must verify that the timing, reference, and supply requirements of the replacement part are met before direct substitution.
The ADS8588SIPM supports up to 500 kSPS per channel, and the ADS8568SPM supports up to 510 kSPS per channel. Both perform simultaneous sampling across all eight channels.
Yes. Both the ADS8588SIPM and ADS8568SPM support software-selectable bipolar input ranges of ±10 V, ±5 V, and ±2.5 V, as well as single-ended and differential input configurations, making them suitable for industrial and motor-control applications.
Both parts provide a flexible parallel interface (byte or word mode) and a serial interface compatible with SPI, QSPI, and daisy-chain configurations. The interface mode is selected via dedicated control pins, allowing connection to a wide range of host processors and FPGAs.
Both devices operate from a 5 V analog supply and a 2.7 V to 5.25 V digital supply. The ADS8588SIPM and ADS8568SPM are specified with similar low-power operation, but exact quiescent and active current figures should be taken from the respective manufacturer datasheets, as they vary by operating mode and throughput.
Because they share the same package, pinout, input ranges, and interface options, they are strong candidates for interchangeability. However, the designer must confirm that the timing specifications, reference requirements, and AC/DC performance grades of the alternate part satisfy the system requirements, and validate the substitution against the official datasheets.