AFE5832ZBV
텍사스 인스트루먼트(주)
- Lifecycle
- Active
- Stock
- 2381 PCS
- Package
- FBGA-289
- Series
- 데이터 수집 - 아날로그 프런트엔드(AFE)
AFE5832ZBV과 AFE58JD28ZAV에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.
Replacement verdict
The AFE58JD28ZAV and AFE5832ZBV are both 32-channel ultrasound analog front ends from Texas Instruments sharing the same 14 mm × 14 mm NFBGA-289 footprint and 1.8 V / 3.3 V supply architecture, making them strong functional replacement candidates. However, the AFE58JD28ZAV integrates a digital demodulator and JESD204B serial interface, while the AFE5832ZBV provides LVDS outputs, so system-level validation of the digital interface, clocking, and firmware is required before substitution.
텍사스 인스트루먼트(주)
텍사스 인스트루먼트(주)
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AFE58JD28ZAV | AFE5832ZBV | Why it matters |
|---|---|---|---|
| Number of Channels | 16 | 32 | Channel count determines how many transducer elements can be simultaneously processed, directly affecting imaging system architecture and channel-count compatibility. |
| ADC Resolution | 14 bit | 12 bit | Higher ADC resolution provides greater dynamic range and finer signal quantization, which impacts image quality and small-signal detection. |
| Maximum Sampling Rate | 65 MSPS | 40 MSPS | Sampling rate limits the maximum signal bandwidth and achievable axial resolution in ultrasound receive chains. |
| JESD204B Serial Interface Lanes | Supported (JESD204B) | Not supported | JESD204B support affects board-level interconnect design, FPGA interface selection, and achievable data throughput per channel. |
| Digital Demodulation / CW Doppler | Integrated digital demodulation with CW Doppler support | Not integrated | On-chip demodulation and CW Doppler reduce FPGA resource usage and simplify continuous-wave Doppler processing in the system. |
| Package | NFBGA (ZAV) | NFBGA (ZBV) | Package footprint and pinout must match the PCB layout; differing package codes indicate non-drop-in mechanical and layout compatibility. |
| Power Consumption per Channel (Typical) | Lower per-channel power (16-channel variant) | Higher aggregate power (32-channel variant) | Power budget affects thermal design, battery life in portable systems, and power supply sizing. |
| Input Signal Bandwidth | Wideband ultrasound front-end | Wideband ultrasound front-end | Input bandwidth determines the range of transducer frequencies the AFE can support for different imaging modes. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AFE5832ZBV | AFE58JD28ZAV |
|---|---|---|
| Supplier | Texas Instruments | - |
| Part Status | Active | Active |
| Number of Bits | 12 | 12, 14 |
| Number of Channels | 32 | 16 |
| Power (Watts) | 42 mW | 64 mW |
| Voltage - Supply, Analog | 3V ~ 3.3V | 3.15V ~ 3.6V |
| Voltage - Supply, Digital | 3V ~ 3.3V | - |
| Mounting Type | Surface Mount | Surface Mount |
The AFE58JD28ZAV and AFE5832ZBV are integrated analog front-end (AFE) devices from Texas Instruments intended for ultrasound and medical imaging signal chains. Both integrate a multichannel analog front end with an analog-to-digital converter (ADC) and digital signal processing/decimation, but they differ in channel count, JESD204B lane configuration, and package/pinout details as defined in their respective TI datasheets.
The AFE58JD28ZAV is a 32-channel ultrasound AFE, while the AFE5832ZBV is a 32-channel device as well; both are specified as 32-channel AFEs in TI documentation. Designers should confirm the exact channel configuration and signal-chain options in the respective datasheets before layout.
No. The AFE58JD28ZAV is supplied in a 289-ball NFBGA (ZAV) package, and the AFE5832ZBV is supplied in a 289-ball NFBGA (ZBV) package. Although both are 289-ball NFBGA devices, the package designators differ, so pin assignments and PCB land patterns must be verified against each device's datasheet rather than assumed interchangeable.
Both devices provide a JESD204B serial digital output interface for high-speed data transfer to an FPGA or host processor. The number of lanes, lane rate, and serialization configuration are device-specific and must be taken from the respective TI datasheets when designing the link.
They should not be treated as drop-in replacements. Differences in package designator, pinout, JESD204B lane configuration, and device-specific feature sets mean a substitution requires full validation against both TI datasheets, including power sequencing, clocking, and digital interface timing.
Yes. Both the AFE58JD28ZAV and AFE5832ZBV are positioned by Texas Instruments for ultrasound and medical imaging receive chains, integrating low-noise amplification, variable-gain amplification, anti-aliasing filtering, and ADC conversion with digital decimation. Exact performance specifications such as noise, gain range, and power consumption must be taken from the respective datasheets.
Authoritative parameters are available from the official Texas Instruments product pages and datasheets for the AFE58JD28ZAV and AFE5832ZBV, and from authorized distributors such as DigiKey, Mouser, and TTI. Designers should rely on these sources for electrical characteristics, package drawings, and interface timing rather than unverified third-party summaries.