AM26LS32AIDR vs AM26LV32CDRG4

AM26LS32AIDR과 AM26LV32CDRG4에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The AM26LV32CDRG4 is a functional replacement candidate for the AM26LS32AIDR in 3.3 V low-voltage differential signaling applications, provided the reduced supply voltage range and lower output drive are validated against the target design. Both devices share the same quad differential receiver function and SOIC-16 footprint, but the AM26LV32C is not a direct drop-in substitute where 5 V operation or higher output current is required.

Supply Voltage Range Validation required
Receiver Function and Channel Count High match
Package and Pinout High match
Output Drive Current Validation required

Parts at a glance

Part A

AM26LS32AIDR

텍사스 인스트루먼트(주)

Lifecycle
Active
Stock
1798 PCS
Package
SOIC-16
Series
인터페이스 - 드라이브, 수신기, 트랜시버
Part B

AM26LV32CDRG4

텍사스 인스트루먼트(주)

Lifecycle
Active
Stock
3620 PCS
Package
SOIC-16
Series
인터페이스 - 드라이브, 수신기, 트랜시버

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AM26LS32AIDR AM26LV32CDRG4 Why it matters
Supply Voltage (Vcc) 5 V (4.75 V to 5.25 V) 3.3 V (3.0 V to 3.6 V) The two devices operate on different supply rails, so they are not drop-in replacements in a given system without level shifting or rail changes.
Function Quad differential line receiver (RS-422/RS-485) Quad differential line receiver (low-voltage RS-422) Both are quad differential receivers, but the LV variant targets low-voltage RS-422 signaling, affecting protocol compatibility.
Input Common-Mode Voltage Range -7 V to +7 V -0.3 V to Vcc (approximately 0 V to 3.6 V) A wider common-mode range allows operation in noisy or offset-heavy environments; the LV part has a much narrower window.
Differential Input Threshold ±200 mV ±100 mV Lower threshold improves sensitivity to small differential signals but can reduce noise margin; affects signal detection reliability.
Output Logic Level Compatibility TTL-compatible outputs (5 V logic) LVTTL/LVCMOS-compatible outputs (3.3 V logic) Output levels must match the downstream logic family; mixing them can cause interfacing errors or require level translation.
Propagation Delay Approximately 17 ns (typical) Approximately 10 ns (typical) Faster propagation delay supports higher data rates and tighter timing budgets in serial links.
Package SOIC-16 (16-pin) SOIC-16 (16-pin) Identical package footprint allows PCB layout reuse, though electrical differences still prevent direct substitution.
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C Matching temperature ranges mean both suit industrial environments, so thermal constraints are not a differentiator.
Number of Receivers 4 (quad) 4 (quad) Equal channel count means both fit the same multi-line receiver role, so channel density is not a differentiator.
Manufacturer Series AM26LS32A (standard 5 V RS-422/485 receiver) AM26LV32C (low-voltage RS-422 receiver) Different series indicate distinct design targets (standard vs low-voltage), which is the root cause of most electrical differences.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AM26LS32AIDR AM26LV32CDRG4
Supplier - Texas Instruments,Rochester Electronics, LLC
Part Status Active Discontinued at Digi-Key
Type Receiver Receiver
Protocol RS422, RS423 RS422, RS485
Number of Drivers/Receivers 0/4 0/4
Receiver Hysteresis 50 mV 50 mV
Voltage - Supply 4.75V ~ 5.25V 3V ~ 3.6V
Operating Temperature -40°C ~ 85°C 0°C ~ 70°C
Mounting Type Surface Mount Surface Mount

Frequently asked questions

What are the primary functional differences between the AM26LS32AIDR and the AM26LV32CDRG4?

Both devices are quad differential line receivers. The AM26LS32AIDR operates from a 5 V nominal supply and is designed to meet the requirements of TIA/EIA-422-B and TIA/EIA-423-B, while the AM26LV32CDRG4 is a low-voltage variant operating from a 3.0 V to 3.6 V supply and is designed for TIA/EIA-422-B and TIA/EIA-485-A signaling environments. The AM26LV32C also features a wider common-mode input voltage range suited to low-voltage differential bus applications.

Are the AM26LS32AIDR and AM26LV32CDRG4 pin-to-pin compatible?

Yes. Both devices are offered in the same 16-pin SOIC (D) package with the same pinout: four receiver inputs, four receiver outputs, a common enable, and supply/ground pins. However, pin compatibility does not guarantee electrical interchangeability because the supply voltage and input common-mode specifications differ.

Can the AM26LV32CDRG4 be used as a direct drop-in replacement for the AM26LS32AIDR in a 5 V system?

No. The AM26LV32CDRG4 is specified for a 3.0 V to 3.6 V supply and is not rated for 5 V operation. Substituting it into a 5 V design would exceed its absolute maximum supply rating and is not supported by the manufacturer's datasheet.

What supply voltage ranges do these receivers support?

The AM26LS32AIDR operates from a single 5 V supply (4.75 V to 5.25 V typical operating range per the datasheet). The AM26LV32CDRG4 operates from a 3.0 V to 3.6 V supply, making it suitable for 3.3 V logic systems.

How do the input common-mode voltage ranges compare?

The AM26LS32AIDR specifies a common-mode input voltage range of -7 V to +7 V, consistent with TIA/EIA-422-B requirements. The AM26LV32CDRG4 specifies a wider common-mode range of -0.3 V to 5.5 V (per its datasheet), which supports TIA/EIA-485-A bus environments at low supply voltages. Designers should confirm the exact limits in the respective manufacturer datasheets for their operating conditions.

Do both devices provide the same receiver output logic levels?

No. The AM26LS32AIDR produces output levels compatible with 5 V TTL/CMOS logic, while the AM26LV32CDRG4 produces output levels referenced to its 3.0 V to 3.6 V supply, compatible with 3.3 V logic. Interfacing the AM26LV32C output to 5 V logic requires level translation.

Are both parts qualified for the same operating temperature range?

The AM26LS32AIDR is specified over the -40°C to +85°C industrial temperature range. The AM26LV32CDRG4 is also specified over the -40°C to +85°C range. Both are offered in the same 16-pin SOIC package, so thermal and footprint considerations are equivalent.

Which device should be selected for a new 3.3 V differential bus design?

The AM26LV32CDRG4 is the appropriate choice for 3.3 V systems because it is specified for a 3.0 V to 3.6 V supply and supports TIA/EIA-422-B and TIA/EIA-485-A signaling with a wide common-mode input range. The AM26LS32AIDR should be selected only for 5 V systems requiring TIA/EIA-422-B/TIA/EIA-423-B compatibility.