AMC1300BDWV vs AMC1305M25DWR

AMC1300BDWV과 AMC1305M25DWR에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The AMC1305M25DWR and AMC1300BDWV are both isolated delta-sigma modulators sharing a common functional role, but they differ in input voltage range, output interface, and isolation rating. The AMC1305M25DWR is a ±250 mV input modulator with a single-ended CMOS output, while the AMC1300BDWV offers a ±50 mV input range with a differential output. Designers should validate input signal scaling, digital interface compatibility, and isolation requirements before substituting one for the other in a given application.

Input Voltage Range Validation required
Output Type Not compatible
Isolation Rating Validation required
Package Type High match

Parts at a glance

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AMC1305M25DWR AMC1300BDWV Why it matters
Input Type Current shunt (isolated delta-sigma modulator) Voltage (isolated amplifier) Determines whether the device measures current via a shunt or amplifies a voltage signal, which fundamentally changes the sensing circuit topology.
Output Format 1-bit digital bitstream (delta-sigma) Analog differential output A digital bitstream requires an external digital filter/decoder, while an analog output feeds directly into an ADC or controller, affecting system architecture.
Isolation Rating 5000 V RMS (reinforced) 5000 V RMS (reinforced) Both provide reinforced isolation, but confirming the rating ensures safe galvanic separation in high-voltage applications.
Input Voltage Range ±250 mV (shunt input) ±250 mV (linear input range) Defines the maximum signal swing the device can accept; matching this to the sensor output prevents clipping and preserves accuracy.
Supply Voltage 3.3 V (high side) / 3.3 V or 5 V (low side) 3.3 V to 5.5 V (both sides) Supply requirements affect power rail design and compatibility with the host controller and isolated power scheme.
Gain Fixed (modulator, no analog gain) Fixed gain of 8.2 V/V Gain determines the signal scaling; a fixed analog gain versus a modulator output changes how the downstream system interprets the signal.
Package SOIC-16 (wide body) SOIC-8 (wide body) Package footprint and pin count affect PCB layout and whether the parts are drop-in compatible.
Operating Temperature Range -40°C to +125°C -40°C to +125°C Both cover the industrial range, ensuring reliable operation across harsh environments.
Bandwidth Up to ~20 MHz clock (modulator) ~100 kHz (analog) Bandwidth limits the maximum signal frequency the device can faithfully process, impacting control-loop speed and measurement fidelity.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AMC1300BDWV AMC1305M25DWR
Part Status Active Active
Type Isolation Isolated Module
Applications Current Sensing, Power Management -
Mounting Type Surface Mount Surface Mount
Number of Channels - 1
Resolution(Bits) - 16 b
Sampling Rate(Per Second) - 78k
Data Interface - CMOS, Serial
Voltage Supply Source - Analog and Digital
Voltage - Supply - 3V ~ 5.5V
Operating Temperature - -40°C ~ 125°C

Frequently asked questions

What are the primary functional differences between the AMC1305M25DWR and the AMC1300BDWV?

The AMC1305M25DWR is a reinforced isolated delta-sigma modulator with a ±250-mV input range and a fixed 20-MHz clock, designed for shunt-based current sensing with direct digital output. The AMC1300BDWV is a reinforced isolated amplifier with a ±250-mV input range and a differential analog output, intended for use with an external ADC. The key difference is the output type: the AMC1305M25DWR provides a 1-bit delta-sigma bitstream, while the AMC1300BDWV provides an analog differential signal.

Are the AMC1305M25DWR and AMC1300BDWV pin-to-pin compatible?

No. Both devices are offered in an 8-pin SOIC (DWV) package, but their pin functions differ. The AMC1305M25DWR provides a clock input and a data output, whereas the AMC1300BDWV provides an analog differential output pair (VOUTP/VOUTN). Therefore, they are not direct pin-to-pin replacements and require different PCB routing and interface circuitry.

What is the input voltage range for both devices?

Both the AMC1305M25DWR and the AMC1300BDWV specify a linear input voltage range of ±250 mV, making them suitable for low-side shunt resistor current sensing in motor drive and inverter applications.

What isolation rating do the AMC1305M25DWR and AMC1300BDWV provide?

Both devices are reinforced isolated components rated for a maximum isolation voltage of 5000 V RMS per the respective Texas Instruments datasheets, and both are qualified to the same reinforced isolation standards for industrial applications.

Which device should be selected for a design that uses an external ADC or digital filter?

The AMC1305M25DWR is the appropriate choice when the system includes a digital filter or microcontroller capable of processing a 1-bit delta-sigma bitstream, since it outputs a modulated digital data stream clocked at 20 MHz. The AMC1300BDWV is preferred when the signal chain uses a separate external ADC, because it provides a differential analog output.

Do both devices operate from the same supply voltages?

Yes. Both the AMC1305M25DWR and the AMC1300BDWV use a high-side supply (AVDD) of 3.0 V to 5.5 V and a low-side supply (DVDD) of 3.0 V to 5.5 V, allowing them to share a common power architecture in isolated sensing designs.

What are the typical applications for each device?

The AMC1305M25DWR is typically used in shunt-based current sensing for motor drives, inverters, and renewable energy systems where a digital bitstream is processed by an MCU or FPGA. The AMC1300BDWV is typically used in the same current-sensing applications but with an external ADC in the signal chain, such as in industrial motor control and power conversion systems.