AMC1306M25DWVR vs AMC1302DWV

AMC1306M25DWVR과 AMC1302DWV에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The AMC1306M25DWVR and AMC1302DWV are both isolated delta-sigma modulator amplifiers in the same SOIC-8 (DWV) package, but they differ fundamentally in output interface, input voltage range, and target application. The AMC1306M25DWVR provides a single-ended CMOS bitstream output optimized for motor-drive current sensing with a ±250 mV input range, while the AMC1302DWV delivers a differential analog output with a ±50 mV input range intended for shunt-based current measurement. Because the output type, input range, and signal-chain architecture are not interchangeable, the AMC1302DWV cannot directly replace the AMC1306M25DWVR without redesign of the downstream interface and signal conditioning.

Different output type Different input voltage range Different signal-chain architecture Different application fit

Parts at a glance

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AMC1306M25DWVR AMC1302DWV Why it matters
Input Type Current sense (shunt, differential input) Current sense (shunt, differential input) Both are isolated current-sense amplifiers, but the input architecture and shunt connection differ, affecting how they are wired into the current path.
Output Interface Delta-sigma modulator (1-bit bitstream) Analog differential output The output format determines the downstream interface: the modulator requires a digital filter/decimator, while the analog output feeds an ADC or amplifier directly.
Isolation Rating 5000 V RMS (reinforced) 5000 V RMS (reinforced) Reinforced isolation is critical for safety and noise immunity in high-voltage motor-drive and inverter applications.
Input Voltage Range ±250 mV (shunt input) ±50 mV (shunt input) The full-scale shunt voltage sets the maximum measurable current for a given shunt resistor, directly affecting current-sensing range and resolution.
Supply Voltage 3.0 V to 5.5 V (high side), 3.0 V to 5.5 V (low side) 3.0 V to 5.5 V (high side), 3.0 V to 5.5 V (low side) Compatible supply rails allow both parts to operate from the same system voltages, simplifying power design.
Package 8-pin SOIC (DWV) 8-pin SOIC (DWV) Identical package and pinout enable drop-in board-level substitution without layout changes.
Operating Temperature Range -40°C to +125°C -40°C to +125°C Industrial temperature range ensures reliable operation in harsh motor-drive and power-conversion environments.
Gain / Sensitivity Fixed gain (modulator, defined by full-scale ±250 mV) Fixed gain of 41 (V/V) The gain/sensitivity determines the output scaling relative to the shunt voltage, affecting signal-chain calibration and resolution.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AMC1306M25DWVR AMC1302DWV
Supplier - Texas Instruments
Part Status Active Active
Type Isolated Module Isolation
Applications - Current Sensing, Power Management
Mounting Type Surface Mount Surface Mount
Number of Channels 1 -
Resolution(Bits) 16 b -
Sampling Rate(Per Second) 78k -
Data Interface CMOS, Serial -
Voltage Supply Source Analog and Digital -
Voltage - Supply 2.7V ~ 5.5V -
Operating Temperature -40°C ~ 125°C -

Frequently asked questions

What are the primary functional differences between the AMC1306M25DWVR and the AMC1302DWV?

The AMC1306M25DWVR is a precision isolated delta-sigma modulator with a ±250 mV input range and a fixed 20 MHz clock, designed for direct shunt-resistor current sensing. The AMC1302DWV is an isolated amplifier with a ±50 mV input range and a fixed gain of 41, intended for shunt-based current measurement with a differential output. The modulator outputs a 1-bit bitstream, while the amplifier outputs an analog differential voltage.

Are the AMC1306M25DWVR and AMC1302DWV pin-compatible?

No. Both devices are offered in the same 8-pin SOIC (DWV) package, but their pin functions differ. The AMC1306M25DWVR provides a clock input and a data output, whereas the AMC1302DWV provides a differential analog output and does not have a clock input. Therefore, they are not pin-compatible and cannot be dropped into the same PCB footprint without redesign.

What are the input voltage ranges of the AMC1306M25DWVR and AMC1302DWV?

The AMC1306M25DWVR has a specified input voltage range of ±250 mV, while the AMC1302DWV has a specified input voltage range of ±50 mV. The narrower input range of the AMC1302DWV makes it suitable for lower-voltage shunt signals, whereas the AMC1306M25DWVR accommodates larger shunt voltage drops.

What are the output formats of the AMC1306M25DWVR and AMC1302DWV?

The AMC1306M25DWVR outputs a 1-bit delta-sigma modulated bitstream at a 20 MHz clock rate, which must be processed by a digital filter or modulator demodulator. The AMC1302DWV outputs a differential analog voltage with a fixed gain of 41, which can be directly sampled by an ADC or processed by an analog signal chain.

What are the isolation ratings of the AMC1306M25DWVR and AMC1302DWV?

Both devices are reinforced isolated components rated for 5 kV RMS isolation per UL 1577 and provide a working voltage of 1.5 kV peak per VDE V 0884-11. They share the same isolation barrier specifications, making them suitable for similar high-voltage measurement applications.

Can the AMC1306M25DWVR and AMC1302DWV be used interchangeably in a current-sensing design?

No. Because the AMC1306M25DWVR outputs a digital bitstream and the AMC1302DWV outputs an analog differential voltage, the downstream signal chain differs fundamentally. The AMC1306M25DWVR requires a digital filter or modulator demodulator, while the AMC1302DWV requires an ADC or analog processing. Additionally, their input ranges (±250 mV vs ±50 mV) and pin functions differ, so they are not interchangeable without a complete redesign.

What are the typical supply voltage requirements for the AMC1306M25DWVR and AMC1302DWV?

Both devices operate with a high-side supply (AVDD) of 3.0 V to 5.5 V and a low-side supply (DVDD) of 3.0 V to 5.5 V. The AMC1306M25DWVR also requires a clock input on the low-side, while the AMC1302DWV does not require an external clock. These supply ranges are consistent across both devices per manufacturer datasheets.

Which device is better suited for high-resolution current sensing with a digital interface?

The AMC1306M25DWVR is better suited for high-resolution current sensing with a digital interface because it provides a 1-bit delta-sigma bitstream that can be processed by a digital filter to achieve high resolution. The AMC1302DWV provides an analog output that requires an external ADC, and its ±50 mV input range limits its use to lower-voltage shunt signals. The choice depends on whether the system architecture prefers a digital or analog signal chain.