AMC1311DWV
텍사스 인스트루먼트(주)
- Lifecycle
- Active
- Stock
- 6795 PCS
- Package
- SOIC-8
- Series
- 선형 증폭기 - 전용
AMC1311DWV과 AMC1302DWV에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.
Replacement verdict
The AMC1311DWV and AMC1302DWV share the same isolated amplifier architecture, SOIC-8 (DWV) package, and 5.0 kV reinforced isolation rating, making them functionally interchangeable in many designs. However, the AMC1302DWV offers a ±50 mV input range with fixed gain of 41, while the AMC1311DWV provides a ±1 V input range with unity gain, so signal-chain scaling and input filtering must be re-validated before substitution.
텍사스 인스트루먼트(주)
텍사스 인스트루먼트(주)
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AMC1311DWV | AMC1302DWV | Why it matters |
|---|---|---|---|
| Input Voltage Range | ±1 V (2 V full-scale) | ±50 mV (50 mV full-scale) | Defines the maximum differential signal the isolated amplifier can accept; the AMC1311 suits high-voltage sensing while the AMC1302 suits shunt-based current sensing. |
| Input Resistance | ~1 GΩ (high impedance) | ~22 kΩ (low impedance) | Determines loading on the sensed node; high input impedance allows direct high-voltage divider sensing, while low impedance is intended for shunt current measurement. |
| Gain | 1 V/V (unity) | 41 V/V (fixed) | Sets the signal scaling from input to output; unity gain suits voltage sensing, while high gain amplifies small shunt voltages for current sensing. |
| Input Offset Voltage (max) | ±1.5 mV | ±50 µV | Affects DC accuracy; the much lower offset of the AMC1302 is critical for precise low-level shunt current measurement. |
| Input Offset Drift (max) | ±10 µV/°C | ±0.5 µV/°C | Governs offset stability over temperature; lower drift improves measurement accuracy across the operating range. |
| Gain Error (max) | ±0.3% | ±0.2% | Represents gain accuracy; tighter gain error yields more accurate scaled output and better system-level precision. |
| Input Bandwidth | ~1 MHz | ~1 MHz | Determines the maximum signal frequency that can be accurately amplified; both support similar bandwidth for control-loop sensing. |
| Isolation Rating | 5 kV RMS (reinforced) | 5 kV RMS (reinforced) | Specifies the galvanic isolation barrier strength; both provide reinforced isolation suitable for high-voltage industrial systems. |
| Supply Voltage | 3.0 V to 5.5 V (both sides) | 3.0 V to 5.5 V (both sides) | Defines the operating supply range; identical ranges allow drop-in compatibility for power supply design. |
| Package | 8-pin SOIC (DWV) | 8-pin SOIC (DWV) | Identical package and pinout enable direct PCB footprint compatibility between the two devices. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AMC1311DWV | AMC1302DWV |
|---|---|---|
| Supplier | - | Texas Instruments |
| Part Status | Active | Active |
| Type | Isolation | Isolation |
| Applications | - | Current Sensing, Power Management |
| Mounting Type | Surface Mount | Surface Mount |
The AMC1311DWV is a precision, isolated voltage-sensing amplifier designed for high-impedance voltage measurements, while the AMC1302DWV is an isolated current-sensing amplifier optimized for shunt-based current measurement. The AMC1311DWV features a high input impedance (typically 1 GΩ) suitable for direct voltage sensing, whereas the AMC1302DWV has a low input impedance designed for connection across a shunt resistor.
Yes, both devices are offered in the same 8-pin SOIC (DWV) package with identical pinout assignments for the isolated amplifier family, allowing them to share a common PCB footprint. However, pin-to-pin compatibility does not guarantee functional interchangeability, as the input structures and signal conditioning differ.
The AMC1311DWV is specified for a linear input voltage range of ±1 V (with a full-scale range of ±1 V) for voltage sensing. The AMC1302DWV is specified for a linear input voltage range of ±50 mV for current sensing across a shunt resistor. These differing input ranges mean the devices are not directly interchangeable without redesigning the input network.
Both the AMC1311DWV and AMC1302DWV are reinforced isolated amplifiers rated for 5 kV RMS isolation (per UL 1577) and offer a working voltage of 1.5 kV DC. They share the same isolation barrier technology and certification qualifications, making them equivalent in terms of safety isolation performance.
No, they are not recommended for cross-application. The AMC1311DWV has a high-impedance input intended for voltage sensing and is not optimized for the low-level differential signals produced by a shunt resistor. The AMC1302DWV has a low-impedance input designed for shunt current sensing and would load a high-impedance voltage source, causing measurement error. Each device should be used for its intended sensing function.
The AMC1311DWV provides a fixed gain of 1 V/V with a differential output of ±1 V corresponding to its ±1 V input range. The AMC1302DWV provides a fixed gain of 41 V/V, producing a ±2.05 V differential output for its ±50 mV input range. Both devices output a differential signal suitable for driving a delta-sigma modulator or ADC.
Yes, both devices are specified for an operating ambient temperature range of –40°C to +125°C, making them suitable for industrial applications requiring wide temperature operation. They also share the same supply voltage requirements for both the high-side and low-side supplies.