이미지는 참조용입니다.
24LC04B-I/SN
+BOMIC EEPROM 4KBIT I2C 400KHZ 8SOIC
-
제조업체마이크로칩 기술
-
제조업체 부품 #24LC04B-I/SN
-
데이터시트 24LC04B-I/SN DataSheet
-
패키지 SOIC-8
-
재고1516
365 1일 품질 보증
7*24 영업 시간 서비스 보증
90-판매 후 1일 보증
정품 보증
사양
| 속성 | 가치 |
| Package | Tube |
| ProductStatus | Active |
| MemoryType | Non-Volatile |
| MemoryFormat | EEPROM |
| Technology | EEPROM |
| MemorySize | 4Kb (256 x 8 x 2) |
| MemoryInterface | I²C |
| ClockFrequency | 400 kHz |
| WriteCycleTime-WordPage | 5ms |
| AccessTime | 900 ns |
| Voltage-Supply | 2.5V ~ 5.5V |
| OperatingTemperature | -40°C ~ 85°C (TA) |
| MountingType | Surface Mount |
| Package/Case | 8-SOIC (0.154, 3.90mm Width) |
개요
Description
Key features include byte-level and page-level write operations, with the ability to write up to 8 bytes at a time. The EEPROM supports a 1MHz clock frequency in Fast Mode, ensuring efficient data transfer rates. Built-in Schmitt triggers and noise suppression filters enhance data integrity and reliability. The 24LC04B-I/SN is organized as 512 x 8, storing up to 512 bytes of data.
With its small 8-pin SOIC (Small Outline Integrated Circuit) package, this EEPROM is ideal for compact designs. It is widely used in consumer electronics, industrial controls, and automotive applications for data logging, configuration storage, and other non-volatile memory needs.
Equivalent
1. AT24C04 from Microchip/Atmel
2. CAT24C04 from ON Semiconductor
3. M24C04 from STMicroelectronics
4. BR24C04 from ROHM Semiconductor
These chips share similar features such as memory size, I2C interface, and operational voltage range, making them suitable substitutes. Always verify the datasheets to ensure compatibility in specific applications.
Features
1. Memory Organization: 512 x 8-bit, organized into two blocks of 256 bytes each.
2. Interface: I²C (Inter-Integrated Circuit) serial interface, supporting standard and fast modes up to 400 kHz.
3. Voltage Range: Operates with a voltage supply of 1.7V to 5.5V, making it suitable for a wide range of applications.
4. Endurance: High endurance with 1 million erase/write cycles per byte and a data retention of more than 200 years.
5. Package: Available in an 8-pin SOIC (Small Outline Integrated Circuit) package.
6. Low Power Consumption: Features low power operation with a typical standby current of 1 µA and typical read/write current of 1 mA.
7. Write Protection: Includes a write protection feature to prevent accidental data corruption.
8. Page Write: Supports page write mode for up to 16 bytes per page.
9. Temperature Range: Industrial temperature range from -40°C to 85°C, ensuring reliable performance in harsh environments.
These features make the 24LC04B-I/SN suitable for a variety of applications, including data logging, device configuration storage, and more.
Pinout
1. A0, A1, A2: These are device address inputs that allow for up to eight devices on the same bus.
2. VSS: Ground reference for the device.
3. SDA (Serial Data): This is the data input/output pin used for transferring data to and from the EEPROM.
4. SCL (Serial Clock): This pin is used to synchronize the data transfer between the microcontroller and the EEPROM.
5. WP (Write Protect): This pin is used to enable or disable write operations to the EEPROM. When connected to VCC, the write operations are disabled, and when connected to VSS, write operations are allowed.
6. VCC: Power supply input for the device, typically 2.5V to 5.5V.
These pins facilitate communication and data storage functions typical of EEPROM devices, making the 24LC04B-I/SN suitable for non-volatile memory applications.
Manufacturer
Application
1. Consumer Electronics: Storing configuration settings and calibration data.
2. Industrial Equipment: Logging data and retaining device settings in harsh environments.
3. Automotive Systems: Keeping non-volatile data for control systems and sensor calibration.
4. Medical Devices: Maintaining patient data and device configurations.
5. Communication Devices: Storing network configurations and protocol settings.
6. Embedded Systems: Retaining firmware parameters and user preferences.
Its low power consumption and reliability make it suitable for battery-powered and remote applications.