사양
| 속성 | 가치 |
| Supplier | Renesas Electronics America Inc |
| Package / Case | Tray |
| Series | FemtoClock® NG |
| Part Status | Active |
| Type | VCXO |
| Frequency | 156.25MHz, 187.5MHz |
| Voltage - Supply | 3.135V ~ 3.465V |
| Supply Current | 130 mA |
| Operating Temperature | -40°C ~ 85°C |
| Supplier Device Package | 6-CLCC (7x5) |
개요
Description
The "8N3DV85KC-0015CDI" appears to be a model or part number, likely associated with a specific product such as an electronic component, device, or machinery. Introduction to such a model typically involves understanding its main features, applications, and specifications.
1. Features: These could include technical specifications such as dimensions, weight, power requirements, and connectivity options. It might also cover unique characteristics that differentiate it from similar models.
2. Applications: The introduction usually highlights the primary uses or industries where the product is employed. This can help in identifying its target market or audience.
3. Specifications: Detailed technical data provides insights into performance metrics, durability, compatibility with other systems, and compliance with industry standards.
Understanding these aspects helps users determine the suitability of the model for their specific needs. To get detailed information, consulting the manufacturer's datasheet or user manual is advised, as these documents provide comprehensive insights into the product’s capabilities and limitations.
1. Features: These could include technical specifications such as dimensions, weight, power requirements, and connectivity options. It might also cover unique characteristics that differentiate it from similar models.
2. Applications: The introduction usually highlights the primary uses or industries where the product is employed. This can help in identifying its target market or audience.
3. Specifications: Detailed technical data provides insights into performance metrics, durability, compatibility with other systems, and compliance with industry standards.
Understanding these aspects helps users determine the suitability of the model for their specific needs. To get detailed information, consulting the manufacturer's datasheet or user manual is advised, as these documents provide comprehensive insights into the product’s capabilities and limitations.
Equivalent
To find equivalent products for the 8N3DV85KC-0015CDI chip, you would need to identify the specific features and specifications of the original chip, such as its function, voltage, frequency, and package type. Then, search for chips with matching specifications from other manufacturers. Common approaches include consulting datasheets, using electronic component search engines like Octopart or Digi-Key, and reaching out to suppliers or manufacturers for cross-reference guides.
Pinout
The 8N3DV85KC-0015CDI is a precision clock oscillator from Renesas Electronics. It features a small outline package with a pin configuration designed to support its function as a clock source. This oscillator typically comes in a 6-pin package.
Here's a brief overview of the pin functions:
1. VCC (Power Supply): Provides the necessary voltage to power the oscillator.
2. GND (Ground): Common ground reference.
3. Output: Delivers the clock signal (LVDS or LVPECL, depending on configuration).
4. Output (Complementary): Provides the complementary clock signal.
5. OE/Standby: Output Enable or Standby mode control.
6. NC (No Connect or Control/Config): May vary, often not connected or used for configuration/calibration.
These pin functions enable the oscillator to deliver a stable and precise clock signal, essential for various electronic applications. Always refer to the specific datasheet for any additional pin configuration details, as they can vary slightly based on specific part numbers or revisions.
Here's a brief overview of the pin functions:
1. VCC (Power Supply): Provides the necessary voltage to power the oscillator.
2. GND (Ground): Common ground reference.
3. Output: Delivers the clock signal (LVDS or LVPECL, depending on configuration).
4. Output (Complementary): Provides the complementary clock signal.
5. OE/Standby: Output Enable or Standby mode control.
6. NC (No Connect or Control/Config): May vary, often not connected or used for configuration/calibration.
These pin functions enable the oscillator to deliver a stable and precise clock signal, essential for various electronic applications. Always refer to the specific datasheet for any additional pin configuration details, as they can vary slightly based on specific part numbers or revisions.
Application
The product code 8N3DV85KC-0015CDI is not explicitly recognized in public databases or industry references. However, considering the typical alphanumeric format, it might refer to a specialized component or part within electronics, automotive, or industrial applications. Such codes are often used for microcontrollers, sensors, or electronic components. These items are typically employed in areas like consumer electronics, automotive systems, industrial automation, or telecommunications. For accurate information, it is best to consult the manufacturer's datasheet or product catalog.
Package
The code "8N3DV85KC-0015CDI" doesn't correspond to any specific package type that I can identify. It may be a proprietary or internal code specific to a company or product line. For precise details, please consult the manufacturer or supplier directly.
