사양
| 속성 | 가치 |
| Supplier | Renesas Electronics America Inc |
| Package / Case | Tray |
| Series | FemtoClock® NG |
| Part Status | Active |
| Type | VCXO |
| Frequency | 300MHz, 350MHz |
| Voltage - Supply | 3.135V ~ 3.465V |
| Supply Current | 130 mA |
| Operating Temperature | -40°C ~ 85°C |
| Supplier Device Package | 6-CLCC (7x5) |
개요
Description
"8N3DV85KC-0114CDI" appears to be a specific code or identifier, which could relate to a product, model number, part number, software version, or similar item. Without additional context, it is challenging to provide a detailed introduction. However, here's a general approach:
If this identifier pertains to a product, such as an electronic device, automotive part, or software component, the introduction would typically cover the following aspects:
1. Purpose: Explain what the item is used for, whether it's a component within a larger system or a standalone product.
2. Features: Highlight key features and specifications that set it apart from similar products or versions.
3. Applications: Discuss the typical use cases or industries where it might be applicable.
4. Benefits: Outline the advantages of using this specific model or version, such as improved efficiency, cost-effectiveness, or technological advancements.
5. Compatibility: Mention any known compatibility or integration with other systems or products.
Without specific details, this framework serves as a generic introduction template for "8N3DV85KC-0114CDI."
If this identifier pertains to a product, such as an electronic device, automotive part, or software component, the introduction would typically cover the following aspects:
1. Purpose: Explain what the item is used for, whether it's a component within a larger system or a standalone product.
2. Features: Highlight key features and specifications that set it apart from similar products or versions.
3. Applications: Discuss the typical use cases or industries where it might be applicable.
4. Benefits: Outline the advantages of using this specific model or version, such as improved efficiency, cost-effectiveness, or technological advancements.
5. Compatibility: Mention any known compatibility or integration with other systems or products.
Without specific details, this framework serves as a generic introduction template for "8N3DV85KC-0114CDI."
Equivalent
The 8N3DV85KC-0114CDI is an oscillator chip from IDT (Integrated Device Technology). Equivalent products are often those with similar specifications from other manufacturers. Possible equivalents include:
1. SiTime's SiT8008 series, known for programmable oscillators.
2. Epson's SG-8002CE series, offering customizable frequencies.
3. Abracon's ASFL1 series, known for low-power consumption.
4. TXC Corporation's 7W series, which features a small form factor.
Always verify compatibility with specific requirements like frequency, voltage, and package type before selecting an alternative.
1. SiTime's SiT8008 series, known for programmable oscillators.
2. Epson's SG-8002CE series, offering customizable frequencies.
3. Abracon's ASFL1 series, known for low-power consumption.
4. TXC Corporation's 7W series, which features a small form factor.
Always verify compatibility with specific requirements like frequency, voltage, and package type before selecting an alternative.
Pinout
The 8N3DV85KC-0114CDI is a clock oscillator device. It typically comes in a package with a small pin count. While the precise pin count for this specific part number isn't readily available, similar devices often have a pin count ranging from 4 to 8 pins. The functions of the pins typically include:
1. VCC (Power Supply): Provides the necessary power to the oscillator.
2. GND (Ground): A common ground connection.
3. Output (CLK): Outputs the clock signal.
4. Enable/Disable (OE/Enable): Enables or disables the clock output (if present).
For exact pin count and configuration, it's best to refer to the manufacturer's datasheet or official documentation for the 8N3DV85KC-0114CDI.
1. VCC (Power Supply): Provides the necessary power to the oscillator.
2. GND (Ground): A common ground connection.
3. Output (CLK): Outputs the clock signal.
4. Enable/Disable (OE/Enable): Enables or disables the clock output (if present).
For exact pin count and configuration, it's best to refer to the manufacturer's datasheet or official documentation for the 8N3DV85KC-0114CDI.
Application
The 8N3DV85KC-0114CDI is a crystal oscillator, typically used in various electronics for precise timing and frequency control. Its application areas include telecommunications, computing, and consumer electronics, where it helps maintain accurate clock signals for microprocessors and other digital circuits. Additionally, it may be used in industrial and automotive systems for synchronization tasks, as well as in medical equipment and instrumentation that requires stable frequency references. Its compact size and reliability make it suitable for use in portable and space-constrained devices.
Package
The package type for "8N3DV85KC-0114CDI" is not specific enough for identification. Typically, package types are associated with semiconductor components and defined by manufacturers with standardized codes. To determine the exact package type, you would need to refer to the manufacturer's datasheet or product documentation for this specific part number.
