사양
| 속성 | 가치 |
| Supplier | Renesas Electronics America Inc |
| Package / Case | Tape & Reel (TR) |
| Series | FemtoClock® NG |
| Part Status | Active |
| Type | VCXO |
| Frequency | 148.5MHz, 148.35MHz |
| Voltage - Supply | 3.135V ~ 3.465V |
| Supply Current | 130 mA |
| Operating Temperature | -40°C ~ 85°C |
| Supplier Device Package | 6-CLCC (7x5) |
개요
Description
"Introduction to 8N3DV85KC-0169CDI8" seems to reference a specific code or identifier, possibly related to a technical product, component, or system. Without additional context, it's difficult to identify its exact nature. However, such alphanumeric codes are typically used for cataloging parts, software versions, or documents in industrial, technological, or logistical settings.
If this pertains to a technical document or a product manual, an introduction would generally cover:
1. Purpose: Explains the role or function of the item or document.
2. Scope: Outlines the extent and limitations of what is covered.
3. Specifications: Provides key technical details or features.
4. Applications: Describes where and how it can be utilized.
5. Audience: Identifies who the intended users or readers are.
For a more precise introduction, additional information about the field or context related to "8N3DV85KC-0169CDI8" is necessary, such as industry sector, associated company, or related technologies.
If this pertains to a technical document or a product manual, an introduction would generally cover:
1. Purpose: Explains the role or function of the item or document.
2. Scope: Outlines the extent and limitations of what is covered.
3. Specifications: Provides key technical details or features.
4. Applications: Describes where and how it can be utilized.
5. Audience: Identifies who the intended users or readers are.
For a more precise introduction, additional information about the field or context related to "8N3DV85KC-0169CDI8" is necessary, such as industry sector, associated company, or related technologies.
Equivalent
The 8N3DV85KC-0169CDI8 chip is a specific frequency synthesizer or clock generator. For equivalent products, consider looking for similar clock generators or frequency synthesizers from manufacturers like Texas Instruments, Analog Devices, or Microchip Technology. Look for parts with matching frequency range, output type, and phase noise specifications. Always check with the manufacturer’s datasheets and technical support to ensure compatibility with your application.
Pinout
The 8N3DV85KC-0169CDI8 is a part of the 8N3DV85 series, which is a differential output clock generator. This component is designed for high-performance clock generation applications. The specific pin count and functions can vary slightly depending on the exact configuration and package, but typically these devices come in a 10-pin package.
Here are the common functions associated with its pins:
1. VDD: Power supply pin.
2. GND: Ground connection pin.
3. OE (Output Enable): Controls the output on/off state.
4. CLK_OUT+ / CLK_OUT-: Differential clock output pins.
5. CLK_IN+ / CLK_IN-: Differential clock input pins.
6. SDATA/SCL (I2C Interface): Serial data and clock for I2C programming.
7. NC (No Connect): Pin is not internally connected.
To get the precise pin configuration and functions, consulting the manufacturer's datasheet or technical documentation for the specific part number is recommended.
Here are the common functions associated with its pins:
1. VDD: Power supply pin.
2. GND: Ground connection pin.
3. OE (Output Enable): Controls the output on/off state.
4. CLK_OUT+ / CLK_OUT-: Differential clock output pins.
5. CLK_IN+ / CLK_IN-: Differential clock input pins.
6. SDATA/SCL (I2C Interface): Serial data and clock for I2C programming.
7. NC (No Connect): Pin is not internally connected.
To get the precise pin configuration and functions, consulting the manufacturer's datasheet or technical documentation for the specific part number is recommended.
