사양
| 속성 | 가치 |
| Package | Tape & Reel (TR),Cut Tape (CT),Bulk |
| ProductStatus | Active |
| Type | Receiver |
| Protocol | RS422, RS423 |
| NumberofDrivers/Receivers | 0/4 |
| ReceiverHysteresis | 50 mV |
| Voltage-Supply | 4.75V ~ 5.25V |
| OperatingTemperature | 0°C ~ 70°C |
| MountingType | Surface Mount |
| Package/Case | 16-SOIC (0.209, 5.30mm Width) |
개요
Description
The AM26LS32ACNSR is a quad differential line receiver designed for digital communication systems. It is part of the AM26LS32 family, which is known for its ability to handle balanced and unbalanced data transmission effectively. Key features include high noise immunity, compatibility with RS-422 and RS-423 standards, and the ability to operate over a wide range of temperatures.
This device is particularly useful in applications requiring high-speed data transfer, as it can handle common-mode voltages and provide a reliable output in noisy environments. The AM26LS32ACNSR supports both single-ended and differential inputs, enhancing its versatility in various interfacing scenarios.
With a supply voltage range typically from 4.75V to 5.25V, it operates efficiently within standard TTL levels. The receiver includes built-in hysteresis to improve noise margin and ensure stable signal detection. Its compact design and low power consumption make it suitable for integration into a variety of systems, including industrial and telecommunications equipment. The AM26LS32ACNSR is available in a variety of package options, ensuring flexibility in design and implementation.
This device is particularly useful in applications requiring high-speed data transfer, as it can handle common-mode voltages and provide a reliable output in noisy environments. The AM26LS32ACNSR supports both single-ended and differential inputs, enhancing its versatility in various interfacing scenarios.
With a supply voltage range typically from 4.75V to 5.25V, it operates efficiently within standard TTL levels. The receiver includes built-in hysteresis to improve noise margin and ensure stable signal detection. Its compact design and low power consumption make it suitable for integration into a variety of systems, including industrial and telecommunications equipment. The AM26LS32ACNSR is available in a variety of package options, ensuring flexibility in design and implementation.
Equivalent
The AM26LS32ACNSR is a quad differential line receiver. Equivalent products include the SN75172 and SN75174 from Texas Instruments, the DS26LS32 from National Semiconductor, and the MC26LS32 from ON Semiconductor. These are all designed for similar applications and have comparable specifications, making them suitable substitutes in most cases. Always verify pin configuration and specific performance requirements before substituting.
Features
The AM26LS32ACNSR is a quadruple differential line receiver designed for balanced and unbalanced digital data transmission. Key features include:
1. High-Speed Operation: Supports data rates up to 10 Mbps for fast data transmission.
2. Differential Inputs: Enhances noise immunity, making it suitable for long-distance communications.
3. Wide Supply Voltage Range: Operates from 4.75V to 5.25V, compatible with standard TTL systems.
4. Low Power Consumption: Designed for efficient energy use to extend device life and reduce heat.
5. Tri-State Outputs: Facilitates bus-oriented applications and allows multiple receivers to share a common output line.
6. Open-Circuit, Short-Circuit, and Terminated Line Fail-Safe: Ensures reliable operation under various conditions.
7. ESD Protection: Provides robust electrostatic discharge protection to prevent damage.
8. Temperature Range: Operates reliably over a wide temperature range, typically from 0°C to 70°C.
9. Package Options: Available in different package types for design flexibility.
These features make the AM26LS32ACNSR suitable for use in industrial, commercial, and telecommunications applications where reliable high-speed data transmission is essential.
1. High-Speed Operation: Supports data rates up to 10 Mbps for fast data transmission.
2. Differential Inputs: Enhances noise immunity, making it suitable for long-distance communications.
3. Wide Supply Voltage Range: Operates from 4.75V to 5.25V, compatible with standard TTL systems.
4. Low Power Consumption: Designed for efficient energy use to extend device life and reduce heat.
5. Tri-State Outputs: Facilitates bus-oriented applications and allows multiple receivers to share a common output line.
6. Open-Circuit, Short-Circuit, and Terminated Line Fail-Safe: Ensures reliable operation under various conditions.
7. ESD Protection: Provides robust electrostatic discharge protection to prevent damage.
8. Temperature Range: Operates reliably over a wide temperature range, typically from 0°C to 70°C.
9. Package Options: Available in different package types for design flexibility.
These features make the AM26LS32ACNSR suitable for use in industrial, commercial, and telecommunications applications where reliable high-speed data transmission is essential.
Pinout
The AM26LS32ACNSR is a quad differential line receiver IC designed to receive balanced data transmission signals. It is commonly used in digital communication systems and line receiver applications.
This device features a total of 16 pins, with the following key functions:
1. Inputs (A, B, C, D): Each of the four differential receivers has a pair of input pins (e.g., 1A & 1B, 2A & 2B) for differential signal inputs.
2. Outputs (Y): Each receiver provides one output pin (e.g., 1Y, 2Y) that delivers the logic level based on the differential input.
3. Enable Pins (G): The device includes enable pins to control the output states.
4. Power Supply (VCC, GND): VCC is typically connected to a 5V power supply, and GND is the ground reference.
The AM26LS32ACNSR is optimized for high-speed and reliable data transmission with noise immunity, making it suitable for industrial and telecommunications applications.
This device features a total of 16 pins, with the following key functions:
1. Inputs (A, B, C, D): Each of the four differential receivers has a pair of input pins (e.g., 1A & 1B, 2A & 2B) for differential signal inputs.
2. Outputs (Y): Each receiver provides one output pin (e.g., 1Y, 2Y) that delivers the logic level based on the differential input.
3. Enable Pins (G): The device includes enable pins to control the output states.
4. Power Supply (VCC, GND): VCC is typically connected to a 5V power supply, and GND is the ground reference.
The AM26LS32ACNSR is optimized for high-speed and reliable data transmission with noise immunity, making it suitable for industrial and telecommunications applications.
Manufacturer
The AM26LS32ACNSR is manufactured by Texas Instruments (TI). Texas Instruments is a global technology company that designs and manufactures semiconductors and various integrated circuits, which are used in a wide range of electronic devices. TI is well-known for its analog and embedded processing products, which are used in applications spanning industrial, automotive, personal electronics, communications equipment, and enterprise systems. The company is recognized for its innovation in chip technology and commitment to quality and reliability in its products.
Application
The AM26LS32ACNSR is a quad differential line receiver commonly used in data communication applications. Its primary application areas include:
1. RS-422 and RS-423 Interfaces: It supports these standards for balanced and unbalanced transmission, respectively, ensuring reliable data transfer.
2. Industrial Automation: Used in systems requiring robust communication over long distances and in noisy environments.
3. Computer Peripherals: Facilitates communication between computers and their peripheral devices.
4. Network Equipment: Used in routers, switches, and other networking hardware for signal integrity.
5. Telecommunications: Ensures accurate signal reception in telecom infrastructure.
The device is valued for its high noise immunity and ability to operate over a wide range of input voltages.
1. RS-422 and RS-423 Interfaces: It supports these standards for balanced and unbalanced transmission, respectively, ensuring reliable data transfer.
2. Industrial Automation: Used in systems requiring robust communication over long distances and in noisy environments.
3. Computer Peripherals: Facilitates communication between computers and their peripheral devices.
4. Network Equipment: Used in routers, switches, and other networking hardware for signal integrity.
5. Telecommunications: Ensures accurate signal reception in telecom infrastructure.
The device is valued for its high noise immunity and ability to operate over a wide range of input voltages.
Package
The AM26LS32ACNSR is a differential line receiver IC from Texas Instruments. It comes in a SOIC (Small Outline Integrated Circuit) package type with a 16-pin configuration, designated by "NS" in the part number. This package is surface-mountable and is commonly used for space-efficient designs.
