AX58100

The AX58100 is a highly integrated EtherCAT slave controller from ASIX Electronics, designed for industrial automation and real-time communication. It supports EtherCAT (IEEE 802.3) and features a 32-bit ARM Cortex-M3 core for efficient processing.
Key features include:
- Dual-port Ethernet PHY for daisy-chaining.
- Flexible I/O interfaces (GPIO, UART, SPI, etc.).
- On-chip memory and DMA for high-speed data transfer.
- Standalone operation or host-controlled mode.
Ideal for motion control, PLCs, and IoT devices, the AX58100 simplifies EtherCAT slave implementation while ensuring low latency and reliability.
For details, refer to the datasheet or ASIX’s official documentation.

The AX58100 is a CAN FD transceiver. Equivalent products include:
- TCAN1042/TCAN1043 (Texas Instruments)
- TJA1044/TJA1057 (NXP Semiconductors)
- MCP2562FD (Microchip)
- ISO1042 (TI, isolated variant)
These alternatives offer similar CAN FD functionality, robustness, and compatibility. Check datasheets for specific voltage, speed, and feature differences.

The AX58100 is a highly integrated EtherCAT slave controller with the following key features:
- EtherCAT Compliance: Supports IEEE 802.3 and EtherCAT Slave Protocol (ESC).
- Dual-Core ARM Cortex-M4: Runs at 100 MHz for real-time processing.
- Integrated PHY: Built-in 100BASE-TX Ethernet PHY for reduced BOM cost.
- Flexible I/O: Supports SPI, UART, I²C, PWM, GPIO, and CAN.
- On-Chip Memory: Includes 64 KB SRAM and 256 KB Flash.
- Industrial-Grade: Operates in -40°C to +85°C with robust EMC performance.
- Low Power: Optimized for energy-efficient applications.
- Development Support: Compatible with TwinCAT, CODESYS, and other EtherCAT tools.
Ideal for industrial automation, motion control, and IoT edge devices.

The AX58100 is manufactured by Asix Electronics, a Taiwanese company specializing in networking and connectivity ICs. Asix focuses on designing and producing high-performance Ethernet controllers, USB-to-LAN chips, and embedded networking solutions for industrial, consumer, and automotive applications. The AX58100 is a multi-port Gigabit Ethernet switch controller, reflecting Asix's expertise in networking hardware. The company is known for reliable, cost-effective solutions in the embedded systems market.

The AX58100 is a high-performance Ethernet PHY transceiver IC primarily used in industrial and automotive applications. Key areas include:
1. Industrial Ethernet – Supports protocols like EtherCAT, PROFINET, and Ethernet/IP for factory automation and motion control.
2. Automotive Networking – Enables in-vehicle communication (IVN) for ADAS, infotainment, and gateway systems.
3. Embedded Systems – Used in robotics, PLCs, and smart devices requiring reliable real-time Ethernet.
4. Energy & Grid Management – Facilitates smart grid and renewable energy system communications.
Its robust design ensures high-speed (100Mbps), low-latency, and EMI-resistant performance in harsh environments.

The AX58100 is available in a LQFP-128 package (Low-profile Quad Flat Package with 128 pins). This surface-mount package is compact, suitable for industrial applications, and offers reliable thermal and electrical performance. Key features include a 14mm × 14mm body size and 0.4mm pin pitch. Ideal for Ethernet and motor control applications.