DMP3010LK3Q-13

이미지는 참조용입니다.

DMP3010LK3Q-13

+BOM

MOSFET P-CH 30V 17A TO252

  • 제조업체다이오즈(주)

  • 제조업체 부품 #DMP3010LK3Q-13

  • 재고2661

365 1일 품질 보증

7*24 영업 시간 서비스 보증

90-판매 후 1일 보증

정품 보증

사양

속성 가치
Supplier Diodes Incorporated
Package / Case Tape & Reel (TR),Cut Tape (CT)
Part Status Active
FET Type P-Channel
Technology MOSFET (Metal Oxide)
Drain to Source Voltage (Vdss) 30 V
Current - Continuous Drain(Id) @ 25°C 17A (Ta)
Drive Voltage(Max Rds On Min Rds On) 4.5V, 10V
Rds On(Max) @ Id Vgs 8mOhm @ 10A, 10V
Vgs(th)(Max) @ Id 2.1V @ 250µA
Gate Charge(Qg)(Max) @ Vgs 59.2 nC @ 4.5 V
Vgs(Max) ±20V
Input Capacitance(Ciss)(Max) @ Vds 6234 pF @ 15 V
Power Dissipation (Max) 1.7W (Ta)
Operating Temperature -55°C ~ 150°C (TJ)
Mounting Type Surface Mount
Supplier Device Package TO-252-3

개요

Description

DMP3010LK3Q-13 is a DMP-series power module, typically a compact package that contains dual MOSFETs for high‑efficiency switching in power-electronics designs. It’s used as a fast, scalable switch in applications like motor drives, DC‑DC converters, and load switching.
Key points (vendor-specific vary):
- Likely contains two N‑channel MOSFETs with low Rds(on) for high-efficiency switching
- Rated for tens of volts (exact Vds, Id, and Rds(on) depend on the variant)
- Logic‑level gate drive and common-source/drain configurations
- Built-in protection features (e.g., overcurrent/overtemperature) depending on the exact part
- In a surface-mount DMP package for compact assemblies

Equivalent

I don’t have a reliable cross‑reference for DMP3010LK3Q-13 without its datasheet. Please confirm the manufacturer or provide key specs (VDS, ID, RDS(on) at VGS, VGS(max), package). With those I can list direct equivalents (same polarity, voltage, current, RDS(on) and package) from vendors like Diodes/DMP, Vishay, ROHM, Infineon and ON Semiconductor.

Pinout

Pin count: 3 pins.
Function: Single N-channel enhancement-mode MOSFET (power MOSFET) used as a switch; terminals are Gate, Drain, and Source (G-D-S). Typical package is a 3-pin surface-mount (SOT-23/ similar). For exact pinout, refer to the specific datasheet.

Manufacturer

Manufacturer: Diodes Incorporated.
What kind of company: A global semiconductor company that designs and manufactures discrete components and analog devices (diodes, transistors, MOSFETs, protection devices, and related power/analog ICs).

Application

DMP3010LK3Q-13 is a high-speed N-channel MOSFET used for switching power designs. Typical application areas include:
- DC-DC converters (buck/boost/buck-boost) in telecom, servers, and PCs
- Motor control and drive electronics (BLDC/stepper)
- Automotive power management and body electronics
- Industrial power supplies and inverters
- Solar/battery charge‑discharge controllers and UPS systems
- Load switching and protection in consumer electronics and networking gear
These areas leverage its low on-resistance, fast switching, and suitability for compact, efficient power circuits.

Package

DMP3010LK3Q-13 uses a DPAK (TO-252) surface-mount package.

DMP3010LK3Q-13과 관련된 제품