이미지는 참조용입니다.
DTA114EKAT146
+BOMTRANS PREBIAS PNP 50V SMT3
-
제조업체롬
-
제조업체 부품 #DTA114EKAT146
-
데이터시트 DTA114EKAT146 DataSheet
-
재고5888
365 1일 품질 보증
7*24 영업 시간 서비스 보증
90-판매 후 1일 보증
정품 보증
사양
| 속성 | 가치 |
| Part Status | Active |
| Base Product Number | DTA114 |
| Transistor Type | PNP - Pre-Biased |
| Current - Collector (Ic) (Max) | 50 mA |
| Voltage - Collector Emitter Breakdown (Max) | 50 V |
| Resistors Included | R1 and R2 |
| Resistor - Base (R1) | 10 kOhms |
| Resistor - Emitter Base (R2) | 10 kOhms |
| DC Current Gain (hFE) (Min) @ Ic, Vce | 30 @ 5mA, 5V |
| Vce Saturation (Max) @ Ib, Ic | 300mV @ 500µA, 10mA |
| Current - Collector Cutoff (Max) | 500nA |
| Frequency - Transition | 250 MHz |
| Power - Max | 200 mW |
| Mounting Type | Surface Mount |
| Package | TO-236-3, SC-59, SOT-23-3 |
| Supplier Device Package | SMT3 |
| Packaging | Cut Tape (CT), Tape & Reel (TR) |
개요
Description
The DTA114EKAT146 is a digital transistor (resistor-equipped transistor) designed for switching and amplification in low-power applications. It integrates a bias resistor (R1 = 10 kΩ, R2 = 10 kΩ) with an NPN transistor, simplifying circuit design by reducing external components.
Key Features:
- Type: NPN digital transistor
- Voltage (VCEO): 50V
- Current (IC): 100mA
- Gain (hFE): ~100 (typ.)
- Package: SOT-23 (small surface-mount)
Applications:
- Load switching
- Interface circuits
- Inverter circuits
- Signal amplification
Advantages:
- Compact, space-saving design
- Improved noise immunity
- Simplified PCB layout
Commonly used in consumer electronics, industrial controls, and automotive systems where efficiency and miniaturization are critical.
For detailed specs, refer to the datasheet from manufacturers like Rohm Semiconductor.
Key Features:
- Type: NPN digital transistor
- Voltage (VCEO): 50V
- Current (IC): 100mA
- Gain (hFE): ~100 (typ.)
- Package: SOT-23 (small surface-mount)
Applications:
- Load switching
- Interface circuits
- Inverter circuits
- Signal amplification
Advantages:
- Compact, space-saving design
- Improved noise immunity
- Simplified PCB layout
Commonly used in consumer electronics, industrial controls, and automotive systems where efficiency and miniaturization are critical.
For detailed specs, refer to the datasheet from manufacturers like Rohm Semiconductor.
Equivalent
Equivalent products to the DTA114EKAT146 (PNP digital transistor) include:
- DTA114EKA (same series, different packaging)
- DTC114EKA (NPN counterpart)
- MMBT3906 (general-purpose PNP transistor, may need external resistors)
- KST114 (similar PNP digital transistor)
Check datasheets for exact specs.
- DTA114EKA (same series, different packaging)
- DTC114EKA (NPN counterpart)
- MMBT3906 (general-purpose PNP transistor, may need external resistors)
- KST114 (similar PNP digital transistor)
Check datasheets for exact specs.
Features
The DTA114EKAT146 is a digital transistor (resistor-equipped transistor) with the following key features:
- Type: PNP bipolar transistor with built-in resistors (R1 = 10 kΩ, R2 = 10 kΩ).
- Voltage Rating: Collector-Emitter (VCEO) = -50V, Collector-Base (VCBO) = -50V.
- Current Rating: Collector current (IC) = -100mA.
- Power Dissipation: 150mW.
- Package: SOT-346 (SC-59), compact surface-mount design.
- Applications: Switching circuits, load drivers, and interface circuits in consumer electronics, IoT, and industrial devices.
- Advantages: Simplifies circuit design by integrating bias resistors, reducing component count.
Ideal for space-constrained, low-power applications requiring reliable switching performance.
- Type: PNP bipolar transistor with built-in resistors (R1 = 10 kΩ, R2 = 10 kΩ).
- Voltage Rating: Collector-Emitter (VCEO) = -50V, Collector-Base (VCBO) = -50V.
- Current Rating: Collector current (IC) = -100mA.
- Power Dissipation: 150mW.
- Package: SOT-346 (SC-59), compact surface-mount design.
- Applications: Switching circuits, load drivers, and interface circuits in consumer electronics, IoT, and industrial devices.
- Advantages: Simplifies circuit design by integrating bias resistors, reducing component count.
Ideal for space-constrained, low-power applications requiring reliable switching performance.
Pinout
The DTA114EKAT146 is a PNP digital transistor (resistor-built-in transistor) with 3 pins in a SOT-23 (SC-59) package.
Pin Functions:
1. Emitter (E): Connected to ground (or lower voltage).
2. Base (B): Input terminal with an internal resistor (typically 10 kΩ).
3. Collector (C): Output terminal, connects to load.
Key Features:
- Built-in bias resistors (R1 = 10 kΩ, R2 = 10 kΩ).
- Low saturation voltage, suitable for switching applications.
- Commonly used in inverter circuits, interface drivers, and load switching.
Package: SOT-23 (3-pin).
Polarity: PNP.
Pin Functions:
1. Emitter (E): Connected to ground (or lower voltage).
2. Base (B): Input terminal with an internal resistor (typically 10 kΩ).
3. Collector (C): Output terminal, connects to load.
Key Features:
- Built-in bias resistors (R1 = 10 kΩ, R2 = 10 kΩ).
- Low saturation voltage, suitable for switching applications.
- Commonly used in inverter circuits, interface drivers, and load switching.
Package: SOT-23 (3-pin).
Polarity: PNP.
Manufacturer
The DTA114EKAT146 is a digital transistor (resistor-equipped) manufactured by Rohm Semiconductor.
Rohm is a Japanese company specializing in semiconductors and electronic components, known for high-quality ICs, discrete devices, and passive components. Founded in 1958, Rohm serves industries like automotive, industrial, and consumer electronics, emphasizing innovation and reliability.
The DTA114EKAT146 is commonly used in switching and amplification in compact circuits.
Rohm is a Japanese company specializing in semiconductors and electronic components, known for high-quality ICs, discrete devices, and passive components. Founded in 1958, Rohm serves industries like automotive, industrial, and consumer electronics, emphasizing innovation and reliability.
The DTA114EKAT146 is commonly used in switching and amplification in compact circuits.
Package
The DTA114EKAT146 is a digital transistor (resistor-equipped transistor) in a small SOT-416 (SC-75) surface-mount package. It includes a built-in bias resistor for simplified circuit design and is commonly used in switching applications. The package is compact, measuring approximately 1.6mm x 1.2mm x 0.8mm, making it suitable for space-constrained PCBs.
